1 / 7
ExpressLRS long 868Mhz / 915MHz dipole antenna cover and mounts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ExpressLRS long 868Mhz / 915MHz dipole antenna cover and mounts (migrated from Thingiverse)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 44
- Makes
- 0
- Views
- 712
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
868Mhz / 915MHz Antenna Dipole cover and mounts
To get different angle mount and have antenna 10-15mm below bottom plate use lighter to gently warm-up printed handler . It will be much stronger then print of angled mount due to filament layers continuity.
Notes
- pipe for active and passive antenna wires length
- handlers for M3 screws (mounted below plate) and for M2 standoff (between plates)
- in my case used for ExpressLRS on FrSky (evil) r9mini RX
- print at 0.12 layer height, PETG recommended
Versions
- 2023-06-10 v1.0 Initial version
- 2023-06-18 v1.0 Added ..._pipmount_v1.0 (integrated arm ziptie or insulation take moount)
Category: DIY
