1 / 3
Cage antenna spacer for ham radio cage dipole or end fed.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple spacer for 6 wire cage antennas. The 3mm holes should be fine for 18 ga insulated wire. After…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 149
- Wydruki
- 2
- Wyświetlenia
- 1212
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (11)Powiązane
This is a simple spacer for 6 wire cage antennas. The 3mm holes should be fine for 18 ga insulated wire.
After threading the wires through and drawing them taught, position the spacers and put a drop of super glue where each wire passes through to lock them in place.
Link to a video on the project: https://youtu.be/SzxyjWyiuC4
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: Electronics