1 / 7
QRP dipole antenna for ham radio, or short wave listening — image 1
1 / 7

QRP dipole antenna for ham radio, or short wave listening

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Compact QRP Dipole Antenna Center and End Insulators, Amateur Radio or Shortwave

Rating
4.833 / 5
Likes
130
Downloads
703
Makes
5
Views
4,624
Reviews
6

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

All components to print a center insulator, end insulators, and line tensioners to build a QRP dipole antenna for ham radio. I designed this for use with 6-32 screws, 18 gauge wire, SO-239 connector and 550 parachute cord. The antenna works well for temporary antenna applications. It can be mounted on a pole (the mast diameter socket is .73") or hung from a tree or structure. The antenna parts print well with PLA or nylon except the gasket which is best printed in TPU. I added an optional cap file to give the option of not using countersunk screws. Added 3 STL files to print spacers of different thickness to give more room for wiring if desired.

Note, user GuyO created a very useful adapter to allow this insulator to the attached to (3/4") NEMA electrical conduit. Link below.

https://www.printables.com/model/692598-dipole-antenna-pole-adapter/related

Tags