Silly SCAR Silencer Style
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Silly SCAR in silencer style with forced straight Z-seam on the outside for a cleaner look.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 156
- Makes
- 1
- Views
- 690
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Silly SCAR in silencer style with forced straight Z-seam on the outside for a cleaner look.
The rifling for the dart twist and the thread is identical with the original Silly Spigot SCAR.
Fits any 16mm barrel.
I added the knurled nut here but all other nut versions from the original Silly Spigot SCAR can also be used.
Update 27.1.2025:
Added blank (faux barrrel) versions with no rifling inside (standard length and short)Update 10.9.2025:
I’ve also included all versions without the forced Z-seam, as this is no longer required when ‘staggered Z-seams’ is enabled in your slicer.
When ‘staggered Z-seam’ was activated, the forced Z-seam actually had a negative effect for me, and the Z-seam was no longer in a vertical line but offset!
----------------------------------------------------------------------------------------------------------------------------
The files are already pre-oriented.
My print settings for PLA:
0,2mm layer height
5 walls
20% gyroid infill
7 top and bottom shell layers
no supports needed
Thanks to Sillybutts for the files I could use for this remix.