146 models
20-5-2024 parts have been updated for a better parts fit _________________________ Compatible with both the FGC6 MKI and MKII models (SF bolt checked: works with the SF bolt ) this adjustable butt stock is compatible with the MKI version…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Check updates at the bottom The print files only contain my modified parts, so you'll need to print these plus parts that the original battle axe has, the original…
MDT Inspired buttstock, to be used on a Savage B22 Precision rifle. Or modify it at your will to adapt it on any rifle. Main stock body uses 2 M4x20 screws with 2 M4x6x6 insert Use a M10x80 hexagon socket screw and M10 nut for the…
Using a mlok rail qd mount, some m4 bolts and nuts, you can now add a quick detachment point for your sling to your Magpul MOE stock. The 3d printed piece acts as a spacer and to increase surface area, the weight and the forces are…
I reverse engineered MDT buttsttock spacer. it is compatibile with original. Don't forget to reorient the model on the bed in a slicer. It is upside down by default. No supports, Enjoy.
While we don't sell a full hardware kit, you can get other nerfy hardware available here: Frontline Foam Overview video here: Remix made and published with permission from SillyButts (original fileset from…
I added a gripping texture on the Butt stock for the FGC-9. and some separate pads in case you like to experiment with different materials. or like to add it on a existing one. or just for a better print adhesion. that all up to you.…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice 20250607 Update: MuzzleA (1) wrong file, correct version updated This will need two sets of SLAB hardware (12 in barrel) and will need the following additional…
This is for an airsoft model and will literally not work on the real thing, which has a totally different mounting system, don't waste your time. This is a quick and dirty buttstock rail adapter for the KWA/KSC VZ61 GBB/GBBR Airsoft Toy.…
Talon magazine block for nerf blasters that allows easier single loading of a dart in blasters with mag wells that have a right side cutout. I remixed this so I could single load my slab easier and faster. You could probably mirror this…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Updates: 20260813 Model fix Thanks to user Twubble_4362118 for reporting this Interference found at the base of the pump grip Model files updated with PrimingGrip_V4…
A Quest 3 Gunstock - adjustable in length - soon I will add a buttstock (work in progress). The front and back part are hold by a magnet and are easy to detach. The fits for the controller can be adjustet in lenght along the rail system.…
FGC-9 MKII STINGRAY note: the shrouds, upper and lower and stocks are different from the FGC-9 MKII and MKIIsd. so make sure you use the right model. some parts will be modded so they can be used on both. but you have to make sure that…
An adjustable butt-stock for 13ci PCP air bottles for magfed paintball markers. This has a tightening position. You will need to adapt the tightening clasp and provide your own nut/bolt to your requirement.
No hardware required Fusion 360 and STEP file are provided if modifications are needed ISSUES: The cheek rests do are not aligned properly leaving a channel between them, but the 3d model does not have the channel, so I don't know what…
I liked the Juice cheek rest design and changed it up to be a bit smaller and support free. I printed mine with 10 walls of PA-CF but other materials are probably fine. The CF gives it a nice texture. Hardware list from original: 1x 80mm…
Want your Alchemist to be that much better ? Look no further! Linear rails offer buttery smooth motion while restricting all forms of wiggle and rotation. As an added bonus, this means that nothing ever touches your barrel, so your…
When I replaced my DPMS A2 buttstock with a Magpul MOE rifle stock, my length of pull was unfortunately shortened. Since DPMS no longer makes thei extension, I had to!
Designed for use with the guns original/stock rubber shoulder pad.
Here are my models for 3D printed butt stock I have put quite a few hours into making it and testing different materials if you would like some tips and tricks on how to make it as strong as possible please subscribe to my Patreon where I…
Thanks if you want to buy me a coffee :) https://buymeacoffee.com/methanejuice This is a battle axe made upside down, and takes on the look of the TF2 Widowmaker that uses sillyshells Thanks to all the beta testers' feedback :) Hardware:…
I needed a height adjustable MDT style cheekrest that would fit an AR buffertube to go along with the printed “MDT-like buttstock for Savage B22 Precision” Aquilo created. I used and remixed/resized the thumbwheel they had made to fit the…
When I got my shotgun the end cap was cracked, and the rifle was also a little short for me (I'm 197cm tal). So I made a new end cap and made it deeper. I've attached the FreeCad file so you can change the parameters to fit you.
This is a barrel collet for the zius bk1s/2s that uses the sillybutts collet design.
I can’t test fit this but the main components are the same as the tested FGC-9 one so it should be alright… see the manual of the FGC-9 edition for the installation. for a big part will it be the same. there is a DC buttstock added. this…
all my keychains are now free on my end for COMMERCIAL USAGE,any licensed images used are owned by there creators and would need separate approval updating permissions as and when i get time ghostbuttsters keychain / necklace charm 3…
(SF bolt checked: these models were not compatible for the SF bolt. but some where updated to be compatible it the SF bolt and those are marked with SF. those that could not work with the SF bolt where marked NO SF ) this got a lot of…
Here is my custom Sillybutts Cynthia with 45cm barrel. It uses the following: Fudd Front end https://www.thingiverse.com/thing:6035519 Swoopy Magwell, PT cover, and Grip.…
What this is: Makes crosman stock longer so you dont have to bent to it if you are a little bit larger like me. You can also make it even longer by adding spacers between stages 1 and 2. Butt stock is also adjustable in height so you can…
this work with the WTF-9 folding butt stocks. like the: MOD9 G36 Stock WTF-9 AR15 Folding Stock WTF-9 vector stock https://www.thingiverse.com/thing:4341789 https://www.thingiverse.com/thing:4352089 PVC Stock Adapter PVC Brace insetmeow X…
features an open and closed version, in case you're concerned for darts hitting the shroud from the inside
I really like Mighty Shrub's pivoting shell catcher on my Firefly so I remixed it for the Battle Axe by SillyButts. Fits very nicely alongside my Battle Axe top rail shell holder:…
Designed for a Sillybutts' Excalibur built using Out of Darts hardware kit (12" barrel, K31 spring). Each sight uses a single M3x25 socket head cap screw, to be driven directly into plastic (no tap or heat-set insert required, but be…
Various Cynthia Parts Closed Bolt: Stops the bolt from rotating the entire way around, as well as adding a pic-rail extension for structural rigidity. Includes windows to see the springwell, and meshes with the left side of the blaster.…
Inspired by the Firststrike Floating Buttstock i designed this simple adapter to mount the stock TMC Air-trough Buttstock directly to the bottle so you dont have to worry about fillnipple or pressure gauge position it also gives a…
This is a pocket container for your cigarette butts. If you're a smoker and you've ever been hiking in a place where there aren't any trash bins nearby, you probably know how terrible your backpack is gonna smell if you decide to carry…
This is the Chimera Plunger Head for the latest Sillybutts blaster designs. It is compatible with the Alchemist , the Wildstyle , the Foxbat and the Battle Axe . It uses the same hardware as the plunger head of the above mentioned designs…
More of an application for home defense than say actual field play, but hey, you do you. Obviously nothing preventing this from spinning other than a slight friction fit. Piece has a boss in there to make it longer to fit me better, so…
I like the springy arms of the PBR holder by TheSockCollector (especially in PETG) and wanted to use it on the picatinny top rail of my SillyButts Battle Axe like the one Ready made for the Wildstyle… So I mashed them together really hard…
I designed this Scar MK17 inspired Alchemist buttstock to make it 60mm longer and tweak the blaster proportions a bit to my personal preferance. It is exactly compatible with the original surroundin parts and can be printed with no…
To attach this stock start by compressing the bottom part of the rubber stock and slide it over the top. Stays in position well without any glue. My designs are released under a public domain license: You can do whatever you want with…
This is a trimmed model for adding the Sillybutts collet to any suitable design. On a recent revisit of the files I remixed this from I found Silly had included a version of this as well. I'm unsure if I missed it or if it was a later…
with this drop down 98 adapter is it easier to aim to with a paintball mask. of course it will be slightly longer than the stock configuration. you can add a extra bolt. to make it sronger. and you will need 2 bolts for the 98 stock clamp…
My lifter had a bit of an issue that when i racked the pump back too fast that it would fall down too fast and bounce a lot. the bouncing lifter would then quite often be in the way of the shell that gets released from the tube and result…
Hardware List (BOM): Qty (2) M5 x 12mm BOLTS, Qty (2) M5 x 16mm BOLTS, Qty (2) M5 x 20mm BOLTS, and Qty (2) M6 x 19mm SPRINGS I personally used button-head hex fasteners; countersink is 10mm diameter, so other head styles can be used.…
This monopod attaches to the bottom QD socket of a rifle buttstock. In conjunction with a bipod it allows an additional single-legged point of support towards the rear of the rifle to provide more stability for precision shots. It was…
My edit of a Buttstock for Gavin's SBF! Uses the retractable rods from the SBL1 hardware for its stock. The stock goes through the slingpoint in the SBF on both sides, making this one of the most compact stocks out there! Just use GFZ…
Adds an iron sight to the SMILEY picatinny rails using Sillybutts style/geometry sights. You can use a piece of filament and melt the ends to put the ‘dots’ in the holes. Rails still have enough space to put extra things on, but would…
Building upon the original design, utilizing a slightly more ergo cheek weld (extended and rounded on either side, similar in style to a B5 systems) with an (optional) added locking lever, designed to be printed separately and utilize a…
Silly Shells won't feed properly in magazines if the dart heads stick out past the rim of the shell. Cutting an MXL down to 63mm cuts the foam into two even halves. The 63mm dart sits about a quarter inch below the shell's rim and the…
This is an adapter that threads onto 1/2" black steel pipe and allows you to use any mil-spec AR-15 stock or brace. This can be used to replace the 3d printed stock included with the sanlaki gunstock. Does not include any files to print…
This design is very human. Bring a long screwdriver.
my o-ring had a bad seal so I slightly increased the o-ring stretch
1077 Buttstock Spacers 10mm My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill: 25% Filament: NX2 PLA “PLA+” No supports Troubleshooting: Measure twice, print once ;-) Remember: Not all printers print the same!
Small molds for adding weight to a KRG Bravo stock in the buttstock area. There are different items. One goes in the under either the flat cover, or the Hook style cover that is on the bottom of the stock and accessed by a single screw.…
This release corresponds with this article: https://www.homegrown3d.com/2023/03/20/13ci-and-15ci-tank-cover-butts/ Find links to the editable tinkercad files and made to order prints on the article! Have not flushed out all the 13ci tank…
Buttstock stop pin for mil-spec 6 and 4-position stocks. Might fit Airsoft if using a standard buffer tube extension. Used for setting a stop position so you can grip and rip instead of fiddling with your stock. Works for mil-spec…
This is a drop-in replacement barrel end-cap of the Dart Zone Pro Mk 4 blaster extended barrel. Open three screws, pull out the old cap mount and barrel, drop in the new cap, and close it up. Now you can use any length barrel you like ( I…
I didn't care much for how the original trigger looked, and I also felt that this would be more comfortable. I printed it with the same settings that Sillybutts used, but I did raise the infill to 25% which probably doesn't make much of a…
Some idea from a friday night talk :P Just print and show … 0,2 layers Sir mix-a-lot would be proud.
This rifle was a little short for me so I made a replacement end cap. The stl's depth/length is made for me, but I've attached the freecad file so you can change it. For reference I'm 197cm tall. It's fully parameterized so you only need…
Buttstock for 13ci HPA tank. This is meant to be printed in a hard and soft material. Use TPU or other flexible filament for the shoulder pad, and PLA or PETG for the other parts. The pins will align the two parts so that you can use…
A new version for the “Lifter Roller” with ball bearings. I had the problem that the screw thread had eaten into the lifter roller (see pic), causing a lot of friction and making it very difficult, or even (if I pushed slowly) impossible…
Stand for Sillybutts Alchemist pump action blaster. Fits in Talon magazine loader.
Buttstock for 13ci HPA tank. This fits a Ninja 13ci tank, with a 50.6mm internal diameter. It will fit other tanks with proper scaling. This is designed to be printed without supports, with the knurled pattern facing upwards. You will…
A triangle grip spacer that fills the triangle hole in the old caliburn grips. Uses 2 4-40 3/8 screws for assembly. I believe the "hook side" goes towards the spring hook. This part was created by Sillybutts as a request from me. I cant…
This replacement shoulder pad is designed for the PR900S G2 (or Stormrider in some regions) . It offers improved comfort and control compared to the original hard pad. Print with TPU (flexible filament) Use 2–3 walls for ideal softness…
This is a custom handguard I designed for Sillybutts' excellent Alchemist nerf blaster. The front and rear barrel shroud sections are functionally identical to the original, but with different cosmetic cutouts. The muzzle section is…
Snipex T-Rex style precision stock for FX Impact (or Maverick) with monopod and pouch mount. This stock modification aims to evoke the look of the Ukrainian Snipex T-Rex rifle; by using a pouch to secure the FX Impact at the rear, this…
🐿🥚 Squirrel Egg Girl – The Egg That Kicks Butts and Cracks Nuts! 🥚🐿 Get ready to print the cutest (and mightiest) superhero in egg form! This 3D model captures all the squirrel-powered energy of Squirrel Girl, wrapped in a perfectly…
I could base this adapter only from 1 buttstock piece to the tolerances may be off. but it should work out and this one is a lot compacter vs the X7 adapter so this one could be more useful. please feel free to share pictures of it I like…
Thanks if you want to buy me a coffee :) https://buymeacoffee.com/methanejuice You need the original Foxbat kit , plus the following: https://docs.google.com/spreadsheets/d/1KOiNNJb-DsYRX4Xing8HacSmP-WwXPeXNfO9-ASy6mA/edit?usp=sharing…
Standard Buttstock option for the BPX bullpup conversion for the Tippmann TIPX which allows for access to the remote line adapter and velocity adjustment screw. UPDATE-8-20-23: Alternate files added so the buttstock can be printed with a…
Model 1: Priming lip Added a lip to the rear slide Model 2: Iron sight Relocated the rear iron sight to the back of the slide All models have symmetrical ribbings to match the front slide.
I made this rear sling hook for my SA-H04 and SA-H07 airsoft replicas of HK416C PDW guns. For righties it is advisable to turn the loop to 01:30 position (from the aiming position), between the bolt assist and the charging handle, while…
Always wanted a Rival Lug for your Battle Axe? No? Well that's ok. Here it is anyway. If your Battle Axe was waaaay too short for you, add a few inches to it for some intimidation factor. I even included an EVEN LONGER muzzle. I also…
This grip attaches to the front slide of the Foxbat nerf blaster and slides on the bottom picrail, aided by a few rollers for smooth operation. I have remixed the default front slide to include mounting holes for 4-40 plastic screws.…
10 mm spacer for CZ 600 Ergo stock. For asSembly a 4,5x35 or 4,5x40mm wood screw is necessary to obtain. No modifications to the original parts are required. Installation instructions are in included .pdf file.
this work with the MOD-9 folding or no folding butt stocks. and should work with other rail mounted butt stocks the folding mount is a bit off centred so it should give end up giving you a straight buttstock alinement. also keep in mind…
Can compact your cigarrettes, thanks to great tolerances your cigarette will immediately choke because there will be no oxygen down there. DONT DROP YOUR USED CIGARETTES IN NATURE! USE THIS INSTEAD!!!!
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice This is a project with Dr Flux, and featured in his video :) Beware: The mod reduces the capacity to 3+1. That and this blaster is almost a meter long and ~6 kg…
Приклад для Доберманн Альфа. Для крепления дополнительных тыльников использованы две вплавляемые гайки М3.
-Intended for use with Lone Wolf 052's Brilliant Shikoku - Strike Handguard as an extra reinforcement between the two muzzle sections of the SLAB . Original Handguard Found Here: https://www.printables.com/model/524590 Silly's SLAB:…
This stock goes over a 48ci alluminum HPA tank. I used it for a whole day of woodsball, and it held up no problem. Uses 2ct ¼-20 bolts for clamping on the tank and some ½" plastic screws to hold the pad on (any wood screw would probably…
What if you could pop a magazine into your SLAB with four or five short darts ready to go and ALSO single-loaddarts directly into the chamber? Here's my attempt at a hybrid loading system, based on Studio_Revoct's Zeal mag and using their…
Shotgun slide foregrip designed for a Sillybutts' Excalibur. May need to be modified for other Nerf-style blasters. The foregrip requires: Three #4 (3/8" long) self-tapping screws (you will have some left over from the Out of Darts…
A modern looking comfy trigger for the Breacher by Sillybutts. Metric! For imperial measurements you can modify the .step file :)
I had a 3rd party buttstock on my A-5 which broke and I had no idea where the original went and it will not function without one. My design attaches with 2 zip-ties but I can attest that it works great. I recommend printing this in…
1mm thick multi color. I like to print face down on a textured plate.
so as you could see the this is getting quite long. so this would not be for every one and you can ad a extra bolt to it to make it stronger link to the video there is also a Drop down buffertube avalable…
You will need some m3 allen head screws and m5 screws and nuts to assemble things. The short strut will let you get down lower on the stock if the standard one is too high. It's recommended to print all the structural parts with 10 walls…
It fits Diana Mod.5 perfectly without any need to modify the airpistol itself. There are 2 M4 threaded holes to make sure it wont fall off and so everything is aligned correctly. Diana Mod.5 is an old airpistol and i wanted to give mine a…
EN: 20 mm spacer for CZ 600 Alpha stock. For asembly the 5x140mm wood screw is necessary. No modifications to original parts are requiered. Installation instructions are in included .pdf file. This is not OEM part. I don't take any…
I was asked to design a bathroom tissue (toilet paper) container and it turned into this. I spent some time researching decorative containers, I spent some time browsing the various communities to see what the members had come up with.…
This remixes Sillybutts collet nub with Meaker's N-Strike lug… for reasons.
Replacement latch for Jing Gong G36 Buttstock. Split along the horizontal axis, print in nylon and glue the two parts together using super-glue. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…
Remixed from my original model, which uses 2 screws and was quite a hassle to assemble. That's the one in the picture, but they look the same. Now, the only hardware it needs is one M3 by either 8 or 12mm Allen head machine screw for…
This is the buttstock from SillyButts' Deuce Pro pump action mods. I modified it to include a nerf nstrike butt stock lug. The part needs supports but I didnt print any under the peg (used to tie into the existing screw hole at the back…
I wanted a longer curved buttstock, so I edited it in the slicer. Bottom part has been left unchanged for screws, but I extended the middle 40mm to make it longer. Made it in like 5 mins and I didn't want to open my CAD software to edit…
