Counting matching models…
This is for props or very, very low power bb guns only, do not use on anything else (though-hole 5,76mm). M-baffle suppressor based on the generic air-soft 36mm m14 suppressor tube (e-bay). I have provided the tube and endcaps if you want…
Supressor for airsoft guns . made for SCORPION EVO 3-A1 Specs: Size : X 38 × Y 38 × Z 175 mm Screw size 18mm Printed on bambulab p1p Please if you make it please upload your make
Supressor for airsoft - novritsch style 14mm CCV Easy print, no support needed (use brim for a better base adhesive) Category: Sport & Outdoors
Various assortment of vise blocks in several sizes. I have had good luck printing this in both Taulman PCTPE and Taulman 910. Both allow for plenty of flex and resiliency. Change the Z axis scaling to make the block thicker or thinner to…
Nice and working silencer for your airsoft gun! You can use some foam or print Surpressor baffles: https://www.printables.com/model/366130-stackable-airsoft-suppressor-baffle You need to scale the baffles to 104,38%/33,4 mm Dimensions:…
Pretty much exact replica of the Russian "Rotor 43 00231" Glock suppressor that is designed for pistols chambered in 9x19mm, originally intended for use on a Glock but can be used on any 13x1mm threaded pistol barrel. This replica is…
I designed and tested several moderators for my FX Impact (½ UNF) and this small one, with a felt design, is the one that gave me the best results. The idea was to design a suppressor for the Impact M4 that would maintain the barrel line…
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
This is a remix of an outstanding design that would not work for me. I needed the ability to run a larger diameter suppressor and TandemKross grips. There is a pocket for 15mmx3mm magnets under the barrel, I do not remember if it was…
A Feedback Supressor Cover, drawn for an 98mm Soundhole. The Border is 5mm so you can calculate for any Diameter. There is a circular Groove, add the shortest ordinary Rubberband you can find and the Assemby will fit as a Glove. Works as…
Airsoft mock supressor insipred by DTK 9mm. 15mm length 14mm cw thread. Printed with 0.1 height, worked well.
i was searching for a supressor/muzzle for my gel blaster, but i didnt find it so i designed my own. printer: Bambulab p1s infill: at least 10% support: on
Halo 5 - Forerunner Supressor
As requested by a Reddit user. Inner diameter 9 mm, outer diameter 50 mm, overall length: 233 mm. M14x1 left-handed (CCW) thread.
I wanted to use the Acetech Blaster M tracer on my MK1, so I tried my best to model a decent silencer for it. Acetech's Predator MKIII was a big inspiration, tho it's not an exact replication. Check that distance between the inner and…
Work In Progress For airsoft only. 200mm x 40mm 2 part airsoft supressor. Hollow to allow for foam filling. Standard 14mm CCW thread on one end. Print Settings: Layer Height: Use variable layer height if possible on the main body to…
Oil can suppressor for a 5/8 barrel on a nerf blaster.
Smaller scar suppressor for cosmetic reasons (ie. Talon fang Supressor). Can sill be stringed. Not sure how muzzle blast is affected compared to the regular suppressor. Use 4.5 inches of caliburn plunger tube for scar protection tube. I…
First draft and prototype. * Design: over-barrel (reflex) suppressor for a 16mm barrel. No external metal or carbon sleeve required. * Mounting Interface: Rear base interfaces with a round shaft clamp featuring a 50mm outer diameter and…
May fit other manufacturer's flash hiders but, I have not tested it yet. The thread is clockwise whereas flashhider screws counterclockwise, but the nut fixes itself on the part, so You have to counter with another hand. Uses M3 screws…
I made this for my CM035 but actually never printed this
Airsoft mock supressor insipred by DTK 9mm. 15mm length 14mm cw thread. Printed with 0.1 height, worked well.
Tube covers for the polycarbonate tube that covers the CS Suppressor V1 and V2. Was made specifically to add an “orange tip” to my other blasters. Print in orange ideally. Use some tape to secure the tube(s). 2 versions- One is printed…
A smaller version of the Slug Scar Suppressor V2. Use 4.5 inches of caliburn plunger tube for scar protection tube. Similar to my other smaller suppressor, but updated to use the new collet attachment system and no hardware stringing.…
Print as fine as you can for best results on the threads, I printed at 0.08mm thickness with 0.4mm nozzle and threads came out perfect on bambu labs a1
"Quick Detach" Supressor for TM MWS stock Muzzle device Tokyo Marui 4 prong stock muzzle is a little bit different from a SF4P. The body I printed with a Brim and Tree support for collar design. PLA and smth around 20% Gyroid Infill The…
Modeled a quick suppressor nerf toy. Has internal ports and baffling. Print muzzle-down with no supports.
Small edit to bore out the suppressor scar to 16.5mm for the esper ST fore grip as Slug suggested for the use of longer barrels. No adjustment ring required but can be used, and stringing is now pointless. PC tube is TC length plunger…
Muzzle device designed to port excess air but at a slower rate, this reduces the overpressure affecting dart flight path, whilst simultaneously acting as a barrel extension to allow blasters to hit slightly higher that it otherwise would.…
A smaller suppressor thing that even smaller than my smaller CS suppressor. A leftover from the other suppressor. Im not sure it works, but is kinda a meme item anyway.
Its a Supressor for your Nerf gun (16mm Outer Barrel Diameter) That Slides directly on The Nerf gun Barrel (No Nstrike Barrel adapter)
REQUIRED HARDWARE: 1x stnadrd m4 muzzle flash hider (photo included) PRINTING SPECIFICATIONS: 70-80% infil for durability infil pattern : triangles scaling shouldnt be needed ASSEMLY: take the m4 flash hider and jus push it into the…
This is a remix of an outstanding design that would not work for me. I needed the ability to run a larger diameter suppressor and TandemKross grips. There is a pocket for 15mmx3mm magnets under the barrel, I do not remember if it was…
Its a Supressor for your Nerf gun (16mm Outer Barrel Diameter) That Slides directly on The Nerf gun Barrel (No Nstrike Barrel adapter)
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
