200mm x 40mm Airsoft supressor - Work in Progress
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An airsoft supressor that can be filled with foam. 200mm long, 40mm outer diameter, 14mm CCW thread.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 73
- Makes
- 0
- Views
- 533
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Work In Progress
For airsoft only.
200mm x 40mm 2 part airsoft supressor.
Hollow to allow for foam filling.
Standard 14mm CCW thread on one end.
Print Settings:
Layer Height: Use variable layer height if possible on the main body to ensure the 14mm CCW thread prints well. You'll want your printer to go down to ~0.1-0.12mm layer height for the threads but up to 0.24-0.28mm for the rest of the body.
Walls/Top and Bottom layers: At least 5 or 6 walls to make sure BB hits don't damage the print.
Infill: 15-20% is fine as there isn't much infill.
Material: PLA+ or PLA ST might be okay, though something like CF Nylon would probably be more ideal.