200mm x 40mm Airsoft supressor - Work in Progress
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An airsoft supressor that can be filled with foam. 200mm long, 40mm outer diameter, 14mm CCW thread.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 533
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Work In Progress
For airsoft only.
200mm x 40mm 2 part airsoft supressor.
Hollow to allow for foam filling.
Standard 14mm CCW thread on one end.
Print Settings:
Layer Height: Use variable layer height if possible on the main body to ensure the 14mm CCW thread prints well. You'll want your printer to go down to ~0.1-0.12mm layer height for the threads but up to 0.24-0.28mm for the rest of the body.
Walls/Top and Bottom layers: At least 5 or 6 walls to make sure BB hits don't damage the print.
Infill: 15-20% is fine as there isn't much infill.
Material: PLA+ or PLA ST might be okay, though something like CF Nylon would probably be more ideal.