Counting matching models…
Silencer for barrel cover and stock for m4/ar15 created by me. Silencer for m14 ccw thread, must be enlarged in X and Y axis by 2% so that the fit is correct. I used m3 imbus screws with a length of 20mm.
An adapter to be used on Ice Barrel 400 , so you can chill the water with the lid closed. Connects to a 3/4" barb connector Print upside down with no support
Nikon bayonet mount to use various projector lenses on nikon camera's. The inside barrel width is 44mm wide and fits the Leica Elmaron 1:2.8/100mm and Leica Hektor -P2 1:2.8/85mm projector lenses PLA printed
Get your very own barrel! This barrel has several options that include a lid, fire (where you can add a tea light underneath), lid with fire, or goo. The fire file by itself will need tree supports and less infill (5-10%) depending upon…
Jan 2025. You probably should not use this, there is a better way. You can clamp to the metal buts on the front of Wasp, like the official “dragon” BCAR does that was released by Colonel Wasp themselves. ------------------------- NOTE:…
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
Cut off of the top section on the minigun barrels.Can be used for items like pencils,pens,paint brushes,straws,sharpies,various,markers and the list goes on. 74mm high,94mm diameter.Please feel free to rate and review.
Summary This is a easy-to-print 1:24 scale model of a oil drum / oil barrel. Print Print with 0.2 layer hight or lower. No supports are needed. Use 3 perimeters and 10% infill. Dimensions at 100% scale (1:24) Height: 36.6mm Diameter:…
Some cheap Amazon 5525 barrel jacks are a little loose on the Pinecil causing a weak connection. This is a boot to help secure the connection. The part is to be printed in TPU. I have found it to work using the following barrel plugs.…
Want a unique card box for your next MTG session? Why not a metal barrel to house your most toxic of decks? Use standard filament and settings and make sure to print 2 of the stand legs. Note: the card box should be small enough to fit 2…
Barrel Trimming Pen Blank Squaring Jig to be used with Bench top Disc Sanders. You just slide your blank along the mandrel rod into the rotating disc to square your blank. You can clamp the jig to your miter slide or clamp the miter to…
A friend created this file for me when my the debris cover on my rain barrel was destroyed in a hail storm. Hopefully this will come in use for someone somewhere.
This is a wrench to remove the Barrel Bushing on a Browning 1911-380 (It may also fit the Browning 1911-22 but I have not confirmed if it fits) I printed it in ABS at 100% solid for extra strength.
Prevent Damage to Your Blackmagic Converters with This Strain Relief there are 3 separate models. to fit the most popular converters. Keep your Blackmagic Design converter secure and fully functional with this specially designed cable…
This is a dice cup that I designed to look like a barrel. It is not the standard barrel shape and is tapered. I printed it in PLA with supports. It could probably be used as a drinking cup if printed in PETG.
To be paired with my Marshmallow Blaster Modular Breech , I've created a super simple method to attach a 31mmx33mm aluminum tube (Greg barrel) to launch Mega XL at frankly frightening velocities. Simply thread the 33mm_adapter onto to the…
This is a drop in barrel replacement for the Dart zone solo pro, that allows the addition of a longer metal barrel and/or the addition of and 16mm OD barrel accessories. Simple, straightforward design that just works. This was made via a…
While making the Moon rocket I wanted to have a box containing the Shelly RGBW2, its cables and the momentary switch.
inspired by the barrel of monkeys toy. i thought this would make a great bead.
May require a little sanding to be a perfect fit. Depends how warped your vehicle is. Got it spinning perfectly in mine.
Mega Barrel for the Pick-Rocket 2 X-Shot Skins Menace Remix After seeing the model and remembering that the menace could launch Megadarts (tnx @Corvus_1914958), I knew there was more potential being left on the table. Someone just had to…
This is a remix of Everythingwargaming's WOODEN BARREL in addition to Magic_I3Prusa's Lagerfeuer Weihnachtskrippe . The barrel consists of two parts now that are connected. There is enough space to add a 40mm round / 20mm high tealight so…
Updated Version 1.1 9x Short Darts ----- Silly Shell ----- with 3x airtight barrels 9x Short Darts (3x3) or 27x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly…
Silly Shell --- Sniper Barrel + MEGA XL Spigot Silly Shell with 13mm ID barrel to rear load and shoot short darts or Elite darts. The spigot at the front can shoot MEGA XL darts. This Silly Shell has a length of 198mm and is much longer…
12x Short Darts ----- Silly Shell ----- with 3x airtight barrels 12x Short Darts (3x4) or 36x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly shell for better…
Improvements Improvements 4. 5. 2026 More photos of other details of the weapon. Inserts for removing various clearances in the weapon, mostly made of CU. The dimensions of the inserts work for my airsoft gun, yours may need different…
Airsoft underbarrel grenade launcher Used screw 3 mm self tapping screws for assembly 5pcs 3x30mm (main body screws) 1pc 3x40mm (barrel lock brick) 2pcs M4x35 + M4 nut for RIS mount 1 piece M4x15 worm screw optional - like a replacement…
thank you too AB Quintic for the base model, this is a double sided Diessell choke barrel, with a riffled segment in between. improves accuracy and distance of the half darts.
A protection for rain barrels to prevent dirt from getting into the rain barrel. Designed for 120mm Diameter holes. Dimensions: bottom / sieve: 119,5mm overhang: 135,5mm height: 10mm Supports needed. It is recommended to print with ASA.…
The X-Shot Pro Piston Pump AEB Barrel Shroud is a stylized muzzle to cover the exposed barrel of the X-Shot Skins Pro Motorized Piston Pump AEB. Featuring a Picatinny rail and M-Lok-compatible slots, this shroud allows for the mounting of…
Valhalla Barrel Grip – Bring the spirit of the Vikings to your drink! 🍺⚔ This 3D-printed can holder combines the rustic look of a wooden barrel with the fierce touch of a Viking axe and shield. Designed for standard beverage cans, it…
Give your Nerf Rival Challenger a new look with this tactical-looking barrel. One of the first and, in my opinion, the coolest Nerf Rival Challenger barrels to exist! (I originally uploaded the barrel to my Maker World 2/26/24)
handnut G3/4" for water barrel recommended: uv-radiation proof filament 100% infill supports needed show me your makes !
Capture a touch of rustic charm for your desk with this 3D printable STL model of a Barrel Pen Holder. This functional and decorative piece is perfect for organizing your pens, pencils, and other office supplies. Usage & Links Personal…
V3 OUT NOW! 21 millimeter barrel mount for any GoPro or action camera. Takes around an hour to print depending on settings used. I printed it on 30% infill, with .5mm thick top/bottom and sides. If you print it on higher infill, it will…
These were designed specifically for the board game "Gobblet", but you could use them for just about anything. As part of the game, they all nestle together with a little wiggle room. They should be printed upside down, except for the…
This is a Multibin for Multiboard container > 3x3 x 0.5 height for the Apple Barrel (appleBarrel) paints, but also works for most other paints - just will be too large for the Valejo sets. This is for 13 paints
Print right side with supports Needs 2 M3x30 screws and 2 M3 nuts apologies for the bad print quality lol
OpenSCAD script for wooden and metal barrels. Customizable with buttons and sliders Size, shape, bands, can be modified Barrel can be open or closed. Barrel can be lowered and tilted so it appears the barrel is submerged. Wooden barrel…
Changelog: 11/03/2025 - Fixed priming bars missing from part drawings pdf. Changelog: 02/21/2026 - Added hw kit suppliers for asia What is this? The Stagecoach Side By Side is a 3D printed nerf blaster that fires and ejects Sillyshells ,…
I made a way to mount an airsoft/tactical flashlight (from aliexpress) on a 30mm OD carbon fiber barrel. Fits fairly snug, mounts with 2 screws, I believe M4. I will do a picatinny one as well later, perhaps. Print upright, does not…
THE NEWEST BCAR I POSTED CAN BE PRINTED WITHOUT SUPPORT. IT LOOKS BETTER AND IS EASIER TO PRINT. The BCAR is set at 10 degrees with progressive crush. Not sure if anyone has done that before so please give me feedback on its performance…
Fit tightly to the inside of a lynx muzzle and keyed for 40cm. Alternatives provided if your barrel pushes the notch too far forward (marked as the tenths of a mm it's moved).
this is from a Image Trace Have fun Gcode from BlenderCam MAKE your own EXR from the STL Machined on Home made CNC at 2k mm/min Time 1,5hr 40kRPM 20USD Millhead Sand/Wallnut/Glass Blasted then Clear coded ! For bigger you know How you…
Find an improved and tested version of this model here I modeled this in Onshape but keep in mind, this model has not been tested although i think it should work fine but it probably will reduce FPS a lot because of the FDM layer lines.…
Bomb barrels, based on the design from the wild games. Approximately 38mm scale. Two versions are provided: one with a flat bottom and one with detailing on both sides. The flat one is very FDM friendly!
A moblin, approximately 38mm scale, tossing what appears to be a bad idea straight towards you. Scaled for a 50 mm base. Five versions of the model are available, there are stl files for each of the moblin types and a fifth .3mf file that…
**WARNING**: THIS IS VERY SHARP AT THE FRONT OF THE BARREL. KEEP ALL SENSITIVE BODY PARTS AWAY FROM IT. **NOTE** THIS IS FOR THE 12 BCAR VARIANT OF THE ZNC AUS. YOU WILL ALSO HAVE TO PAINT IT.(unless you have ams and set a color change)…
This is the GridQuest Barrels (diff. versions) Game size SINGLE barrel: 1x1 field Available in TWO versions: OPEN / CLOSED barrel. Can be used to create own racks or as a standing barrel. Use the base.stl. and a drop of glue. Game size…
ITS AVERAGE!!!! - slightly longer barrel (230mm stock> 120mm >80mm 'micropp') and is an optimised and tested length with higher accuracy and MUCH less drop over ~10m . Probably best for 150fps cap games but don't have a chrono :/ * EDIT I…
9v Volt Battery Box Holder with 5.5mm Barrel Plug for LED Lights. Battery box is desinged to fit 5x2mm round magnets and a 36.5mm (just the female end) barrel plug. Support is needed where the barrel plug goes. I plan on making some…
A handy thing for collecting rain water in your garden. I printed it out of ABS. PE would be very good, too. Fixed with a couple of tin roof screws and sealing was guaranteed with a bead of butyl sealant between the tap/barrel/flange…
🔗 https://www.patreon.com/c/toadstoolweaver Most of my files are FREE, thanks to the incredible support of my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking some nice extras: ✨ Early access…
I have included a early file encase of too tight of tolerances/differences between VFC USP's. Printed in PC with a 0.4 nozzle and I have been printing these upright with the thread at the top and leaning the model back till the barrel…
This handle is significantly more stable than the original; and it actually locks into place when closing the bin. Instead of two plastic pins, this design uses two M3 screws (not countersunk, min. 16mm, preferably 20mm). The screws can…
Bingo Loto barrels 0.2mm height 0.4 nozzle PLA fuzzy skin on the shell and random seam alignment ironing on top numbers are printed with pause and filament color change
ENG: Kingdome Come Philips One Blade barrel old item holder ITA: Kingdome Come Philips One Blade barile porta oggetti
Philips OneBlade 360 Barrel Compartment Inspired by the medieval world of Kingdom Come: Deliverance II, this barrel-style container is designed as a fun and functional display holder for the Philips OneBlade 360 – Kingdom Come Limited…
A Z-belt tensioner for the top of the elegoo Print 2, one for each side See original model for more details (go all the way back in the history to the original)
A worker barrel thread designed to fit into 16mm barrel chambers. the ID of the chamber is around 13.5 to be printed between 13.2 and 13.3 mm Id to accomodate Oring sizes and reduce friction/wear from layer lines. This is a printed…
This 3D model does not include supports; however, they can be added in Bambu Studio. It was printed using PLA filament on a Bambu Lab P1S. The design was created in Tinkercad. I hope you find it useful.
3D model description Barrel Extension with 8.5cm / 3.35 in, has a 14mm CCW Dimensions: - Length: 85MM - Widest Diameter: 20mm 3D printing settings My advice so you can get the best quality on this print on Cura 5.3.1 - Layer Height:…
Steel barrels on a pallet Terrainpiece for model railroads or miniature gaming
Pull through barrel cleaner for airgun. Simple aid for cleaning airgun barrel quickly. Small and light to carry with. Additionally needed items -length of 4 mm PTFE tube -M2,5 self tapping screw -M2.5 steel washer -some braided fishing…
Single print with snap-in barrel feature
This is a simple oil barrel–inspired pen holder designed for everyday desk use. Two versions are included: • With ribbed • Smooth design The model is easy to print, requires no supports , and works well as a functional yet decorative desk…
This is a packout (48-22-8435) insert for the M18 Barrel Jigsaw (2737B-20). I have the Diablo 20 blade set (DJT20S) inset under the tool. There is space for the "owners manual" and "light guard" under the blades. It will hold a battery…
This compact muzzle brake for the G26 Fidget Keychain is based on realistic firearm components and design principles. It features a streamlined profile with three beveled slots, providing a detailed tactical look proportional to the G26…
A classic environment essential, this wooden crate and barrel set adds instant realism and depth to any fantasy or medieval scene. Featuring a stacked wooden crate resting atop multiple detailed barrels, this prop set is perfect for…
A versatile cargo scatter set featuring stacked wooden crates, reinforced barrels, bundled supply sacks, and a small pallet base. This collection is perfect for adding depth and realism to marketplaces, docks, warehouses, taverns, and…
I just designed a few barrel condoms so that I can personalize my own and printed the with TPU. There are 3 styles without texture so that anyone can embossed there own on the slicer and added a few with different texture. I tested…
I 3D printed this from 3DQF Orange PLA. Print Settings: 0.2 layer 220 DegC 0% infill 1h print time My Dad helped me design it in fusion360 and used my prusa mini.
The Blaster Barrel ID Key is a ready-made tool for performance tuning of foam dart “nerf” blasters. Featuring a step gauge design with a faux key-bow handle, this device measures an aluminum barrel's inner diameter, enabling reference to…
This Little Rocket Adapter is a coupler designed to attach Little Rocket Barrels (or my Little Rocket PCAR) to 16mm or similar OD exposed metal barrels. In combination with my Little Rocket PCAR, this allows you to leave your Little…
The model utilises STL files instead of the original step file
This modular barrel-style bird bath is designed for easy 3D printing and assembly. The model is split into separate printable components including: Outer decorative ring (2 parts) with protrusions for fixing Removable waterproof inner…
This desk pen organizer is shaped like a small wooden barrel, turning everyday pen storage into something that actually adds character to your workspace. It holds pens, pencils, markers, and small tools upright, keeping them easy to grab…
This expandable fidget barrel is inspired by the shape of an industrial oil drum and features a segmented, articulated design that allows it to smoothly expand and contract. The cylindrical form combined with rhythmic movement creates a…
a way to let your nerf hobby barrels have an n-strike barrel on them
Version 3 of the beloved barrel mount. Now low-rise to be sleeker and work better with newer action cameras.
Made a compact DC power input enclosure designed around the DC022B (5.5x2.1mm) and KCD1 rocker Switch. I created the box to add an inline power toggle for a 24V LED workbench light. Before you print: The rocker switch cutout is modeled…
J'ai dessiné ce support pour le HDR50 qui possède le support double barilllet. Imprimé en PETG. Il est possible de le fixer contre un mur, une porte ou un meuble avec l'aide de deux vis.
Added a spiral to the barrel so that it could act as a candy dispenser. works well with tootsie rolls @ 200%.
make the vulture leg pretty, made some quick examples but included base step files. If there are any issues with them let me know!
Design and details: I designed this holder for the Philips Oneblade 360 Qp4631/65 with the goal of having a place for the body comb and skin protector, hidden when the blade is not in use, but at the same time being easily accessible when…
A compact underbarrel flashlight add-on for the G26 Fidget Keychain, designed to give your slide-action toy a more tactical look. Simple to print, easy to assemble, and fully compatible with the original model. No glue required…
Asked MrHeathpants about making some modular tubes since the twist lock parts are easy to swap, but he said he's too lazy rn, so I spent a couple minutes cutting up the meshes for shorter copies. Parts tagged by how many darts lengths…
Just simple piece of barrel. I make the rings more fat to pop the detail. Need to scale up a bit. 20 mm height ideal
This is a simple barrel-mounted holder for blowgun nail darts. It clips onto a 16mm diameter tube and holds 8 darts made from 3mm nails . The design keeps the darts secure so they don’t rattle or fall out, while still allowing quick…
