RADIOACTIVE BARREL FLOWER POT (GLOW IN THE DARK)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
makes your plants look like an irradiated creature.
- Rating
- 4.6 / 5
- Likes
- 172
- Downloads
- 782
- Makes
- 10
- Views
- 3,007
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A real eye-catcher in any room!
I split the print into two elements to make it two-colored. The parts are simply stuck together.
I recommend using glow-in-the-dark filament for the "liquid" to achieve the great effect.
Inner diameter: 14 cm
Usable depth: 12 cm
3D PRINTING SETTINGS
The drum can be printed upright.
I printed the liquid upside down, with the drops pointing upwards. This means that no support structure is needed.
The print was printed in PLA with a layer height of 0.2 mm and 5% infill. Set the number of wall lines to 6!
-Temperature of the nozzle: 205 °C
-Temperature of the bed: 60 °C
For good printing plate adhesion, it may be necessary to keep the ventilation low or even switch it off during the first few layers!
Have fun printing and take a look into my other creations ;)
