1 / 5
RADIOACTIVE BARREL FLOWER POT (GLOW IN THE DARK) — zdjęcie 1
1 / 5

RADIOACTIVE BARREL FLOWER POT (GLOW IN THE DARK)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

makes your plants look like an irradiated creature.

Ocena
4,556 / 5
Polubienia
169
Pobrania
778
Wydruki
9
Wyświetlenia
2987
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A real eye-catcher in any room!

I split the print into two elements to make it two-colored. The parts are simply stuck together.

I recommend using glow-in-the-dark filament for the "liquid" to achieve the great effect.

Inner diameter: 14 cm

Usable depth: 12 cm

3D PRINTING SETTINGS

The drum can be printed upright.

I printed the liquid upside down, with the drops pointing upwards. This means that no support structure is needed.

The print was printed in PLA with a layer height of 0.2 mm and 5% infill. Set the number of wall lines to 6!

-Temperature of the nozzle: 205 °C

-Temperature of the bed: 60 °C

For good printing plate adhesion, it may be necessary to keep the ventilation low or even switch it off during the first few layers!

Have fun printing and take a look into my other creations ;)

 

Tagi