Counting matching models…
Made that for some of STALKER LARPs I'm attending. Simple token, composed of two pieces. MMU/AMS not required. Tolerance should be good enough for the fit to be snug - token won't fall apart from normal use. If you find yourself needing…
Printed the model in PLA with a .4 nozzle at .08 layer height with organic tree support. Be gentle when removing the support ...i broke a few parts sigh... ( shovel broke , 1 twig and some of is ...guts)
3D scanned Radioactive Man figure inspired by The Simpsons. Clean geometry and great character detail. Perfect collectible for fans of classic animated characters.
This is a sign with a radioactive warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…
1 Euro coin for the supermarket cart in 2 variants: Vault-Tec logo or radioactive alert signal. Enjoy your post-apocalyptic grocery!
Greetings. This model was designed as a modification for the side fan cover of the K1C printer. The cover aims not only to protect the fan from contaminants but also to improve airflow and increase cooling efficiency. * Model Features :*…
DANGER RADIOACTIVE LANGUAGE - F-BOMB TEST RANGE SIGN Category: Signs & Logos
100 3D-printed dice together with two boxes and lids are used to simulate radioactive decay, since schools rarely have the materials needed for real physical experiments on radioactive decay. The activity and its evaluation for the…
A weathered rusty sign warning of radioactive materials. Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Yellow Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Yellow for the rest. Important note : if you want…
Mark the dangerous hotspots around your office with these safety markers. Or make sure no one touches your food in the fridge.
Simple stepper Cover reproducing black-yellow radioactive logo using Yellow PLA+ Model inner section is not cubic with parallel faces but slightly chamfered to allow close fit and right tolerances. Adding a zip-tie is recommended.
Pretty straight forward print. No supports needed. Parts glue together. Use piece of 1.75 filament for hinge at the back.
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
Simple small radioactive stencil, should print about two layers thick so just thick enough to stay together and thin enough you can tape it to a curved surface easily
Indicator designed for multi material printing. The black center is 0,2mm higher than the rest of the indicator and has a 8mm diameter. Use this to align and glue the magnet to the indicator. The downward face will be the side you look at…
Enclosed 3mf is preset for MMU, use STL for non-MMU print - just add the manual color change at 1.6mm height.
The model is scaled for non-sleek 330ml standard eu can. Reference pic made by AI. Edit: added V2 version with hole to prevent the can stucking. Edit2: added a dice tower version
Hold in one hand in the center and rotate with the outer circle. Or hold and rotate in one hand. Printed in one place, no supports needed. Have fun :-)
Small container to improve handling an Am-241 source from a smoke detector. The tabs of the button should fit the holes present the bottom of the container. You can add a little glue to make the connection permanent. A radiation symbol is…
Stand out from the crowd with this bold, radioactive-inspired pencil case. Featuring the iconic hazard symbol in a striking design, it’s perfect for storing your stationery with a touch of edgy, science-lab style. Durable, eye-catching,…
Because, I guess this is a thing we do in Radiation Oncology now. REQUIRES AN AMS, FILAMENT CHANGER, OR ALOT OF PATIENCE SIGN - The sign is BIG. Fills an H2D bed, Rescale XY to fit smaller beds. Print face down. Import as single object…
Frisbee with Radioactive Symbol – 3D Print Bring an original and slightly “nuclear” twist to your outdoor games! This 3D-printed frisbee features the classic radioactive symbol in the center, making it instantly recognizable and perfect…
Just had the idea and made a quick model, I recommend to use strong luminosity filament
I had a heck of a time trying to find an extruder indicator that will work with my new V3 SE. The few that were out there did not give me what I wanted. So, I took the good work of Toni H and updated it to work with the new extruders that…
Added a separate background plate for the cover. After installing, I found that the cover was too close to the BL touch, so I printed a small spacer you can attach directly to frame to press the stopper microswitch earlier.
Made that for some of STALKER LARPs I'm attending. Simple token, composed of two pieces. MMU/AMS not required. Tolerance should be good enough for the fit to be snug - token won't fall apart from normal use. If you find yourself needing…
Printed the model in PLA with a .4 nozzle at .08 layer height with organic tree support. Be gentle when removing the support ...i broke a few parts sigh... ( shovel broke , 1 twig and some of is ...guts)
Toolbox for storing your electronics. Comes in clutch when you have to transport your insane electronics to and fro from school instead of stuffed in random boxes (protects da pins, trust me you need to protect them) and the tool box is…
3D scanned Radioactive Man figure inspired by The Simpsons. Clean geometry and great character detail. Perfect collectible for fans of classic animated characters.
its a core one skin. the settings for the supports are in the name of the parts. i have done a trash can for the side (9 3X10mm magnets required), a new filament holder with a block so that the roll cant fall down, a radioactive Gearbox…
A bit of sanding may be needed, depending on the quality of the print. Print Settings: Layer Height: 0.2mm. Nozzle: 0.4mm. Infill: 10%. Perimeters: 3 Walls. Material: PLA (Dark Color + Glow-in-the-dark). Support: Required. Bed adhesion: No.
3 logos one with background other without raised so you should be able to easy to do a manual multicolor print 1 inverted Edit: originally uploaded some improperly scaled files ..i fixed that sorry for anyone who had issues
This is a bundle of logos .. use them as additions to your prints , stand alone tags or decorations ..or.. ?? each logo is done multiple ways and in many cases Prusa slicer will detect the layer hight differences I added and offer you the…
Reference: http://wikipedia.org/wiki/Hazard_symbol#Radioactive_sign I needed a radiation warning symbol for a project, and while Thingiverse has a few, none were in OpenSCAD. So as any good hacker, I've thrown one together to aid wherever…
RatRig V-Core 3 ADXL345 Accelerometer Shroud Mount with radioactive cover
remix on : https://www.printables.com/model/53765-side-drawers-for-prusa-mk3-i3%2Fcomments standard lid with radioactive logo.
This chip an be adjusted in the dimensions. The Original fits 1 Euro and can be used to unlock the trolleys. Dieser Chip kann von der Originalgröße 1 Euro (Durchmesser 23,25mm und Höhe 2,125mm) skaliert und auch als Anhänger und glow in…
Customized version of https://www.thingiverse.com/thing:9716 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=9716 Instructions Using the following options: OuterRadius = 60 TrefoilHeight = 2 InnerRatio =…
Just another Extruder Rotation Visualizer "Radioactive" Follow the Instructions here: https://blog.prusaprinters.org/visualize-extruder-motor-movements_7392/
“Radioactive” 45 Record Adapter A multimaterial Print. You can customize the lenght by simply cutting the Adapter with the Prusaslicer. Measure the pin lenght and add +2mm to the cut height. I used this font for the cover.
MMU files for Oil, Toxic Waste, and Radioactive Waste. You use the same drum and rings for all 3 of them you just need to change out the plaques on the side of the drum. Attached is the .f3d file with all the sketches and bodies, so you…
I´ve needed the saucer for my new cactus family members so I´ve created this. Print instructions No supports needed. I´ve used layer 0,15 and 0,2. Both came out nicely. It´s really thin but works great. No leaking. Looks great with the…
A fidget spinner toy shaped like a gear with a radioactive symbol. Center hole fits standard 608ZZ bearings
A bookmark I designed to match the book I'm currently reading - "Every tool's a hammer" by Adam Savage. I printed this with Mango Yellow Prusament PETG, which really matches the color of the book sleeve nicely :) If you print this with…
This design is inspired by radioactive symbols, signifying danger and caution, instantly grabbing attention due to its intrinsic significance and universally recognized shape. It comprises five parts the base, the inner circle, and the…
I designed and drew up in Fusion360 a prop for Cosplay. Its the "goop" that is found by Erica Robyn and Steve. I used a "Voss" plastic water bottle as the clear bottle. It is 63mm so the top and bottom are designed to fit that. The base…
This is a Radioactive sign for printing with a color change mid-print. Recommended print settings layer height: 0.2 mm infill: 20% gyroid perimeters: 2 seam position: aligned Color change should be applied mid-print, after main plate.
Coaster - Bierdeckel. Erste Schritte in OpenSCAD. First steps in OpenSCAD. Mit MK4 und Prusament PLA gedruckt.
3D MODEL DESCRIPTION Mould - 80mm at widest side measurement x 25mm deep Finished Bomb - 74mm widest side measurement x 23mm deep The weight of your bath bomb will vary depending on your recipe. With mine, this made about a 130g bath…
2 piece "Radioacive Spiders" warning sign. Both Models have the GCode with a Filament colour change at the appropriate layer. If you desire to print from the .STL's (for those who print in PLA), in Prusa Slicer Follow the instructions:…
This is a sign with a radioactive warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…
Nuclear material container. Print with the bottom of the container and top of the lid facing down. No supports or brim are required.
This is a simple remix making the radioactive symbol solid and raising it off the top layer so you can change it's colour. I've included the gcode file that is pre-sliced for the correct layer change for making the symbol whatever colour…
Suggested Colors/Filaments: Polymaker PLA Yellow (Hex Code: #F3b400) Polymaker PLA Silk Shiny Chrome (Hex Code: #5b6770) Polymaker PLA Black (Hex Code: #000000) Elegoo PLA Neon Green
Simple signs, two color print without MMU (color changes between different layers). PLA.
I printed it with PLA and it works well, but you can print it with oder materials as well. For two-color printing, I must use two models (second printed on first) to change filaments, so there is an option to separate models and all in…
need any suport infill 20% link chain bellow: https://www.printables.com/model/695436-ender-3-v3-se-spine-cable-chain
A nice barrel as a piggy bank, a little lower than the original, in addition I placed the symbol on the barrel
A real eye-catcher in any room! I split the print into two elements to make it two-colored. The parts are simply stuck together. I recommend using glow-in-the-dark filament for the "liquid" to achieve the great effect. Inner diameter: 14…
A beautiful minimalist painting of a Radioactive label on the wall or with a stand on the table. Size 158 x 200 mm You can find the small print stand for the table on my profile ↓…
Radioactive Nuclear symbol Fallout. Diameter : 98 mm. 1 mm for the yellow part, 1 mm for the black part.
hueforge radioactive symbol Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA azurefilm yellow Transmission Distance: 3.5 Swap…
Credit goes to https://www.printables.com/@ThompsonStudios https://www.thingiverse.com/deusnefum/designs My tweaks/contribution here is very minimal. Also take a look at the various Hammershot cylinder options of Radioactive:…
Are you a fan of post-apocalyptic content, or would you like to live in a devastated world while staying comfortable? Stay **sheltered** and wear this superb radioactive barrel, lit up by the LEDs inside. Surprise! if you print it with…
1 Euro coin for the supermarket cart in 2 variants: Vault-Tec logo or radioactive alert signal. Enjoy your post-apocalyptic grocery!
For a half life investigation, I 3D printed a set of 100 of these "radioactive" dice for each of the lab stations in my room. The primary benefit over standard 6-sided dice is since each die only has one non-black side, it is very easy to…
A few years ago, I published a radioactive sample box which I had designed to hold my trinitite collection. ( http://www.thingiverse.com/thing:48031 ). At the time, I was relatively new to Sketchup. As a result, it's clunky and polygonal,…
Always been a fan of the radioactivity sign, so now that i finally have my own 3D printer i couldn't resist to make my own extruder indicator! Compliment it with: 40x40 Fan Cover Radioactive/honeycomb…
This is a knob for the Ender 3 V3 SE with a radioactive logo (ofcourse). It slides over the original knob, so you don't have to remove the original. Update 21-06-2025: The old version had a weird artifact on the walls so i redesigned it.…
A 40x40mm fan cover with the best of both worlds (Radioactive and honeycomb). The honeycomb is to keep as much airflow as possible pass through the fan cover/grill. There are 2 versions, both work the same it's just a matter of…
A 5015 fan cover with the best of both worlds (Radioactive and honeycomb). The honeycomb is to keep as much airflow as possible pass through the fan cover/grill. There are 2 versions, both work the same it's just a matter of…
A simple screen cover for the Ender 3 V3 SE with a radioactive sign (and some honeycomb). 4 versions: -Radioactive sign. -Radioactive sign with holes. -Radioactive sign with honeycomb. -Radioactive sign with honeycomb with holes.
This is a perfectly fitting hexagonal radioactive bin with snap-in lid for the NUKE tile from Srifraf for TERRAFORMING MARS to protect it from braking apart during transportation. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%
Simple coaster with a radioactive sign round or hex. Both with and without honeycombs. Inner diameter is 90mm to account for a variety of glasses/mugs.
Easy to print Radioctive logo Pla Tpu petg abs are good for this print No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Magnet based off of the radioactive symbol. Holes already in place for 6mm x 3mm magnets.
Support creator here: PayPal me :) Patreon
