Counting matching models…
This is the ideal choice of PCAR if you want both the Silly Spigot mounting system as well as Thanh's new RIPPCAR geometry. Variations The internals of every variation are the same as the RIPPCAR, the only thing that changes is the outer…
THE NEWEST BCAR I POSTED CAN BE PRINTED WITHOUT SUPPORT. IT LOOKS BETTER AND IS EASIER TO PRINT. The BCAR is set at 10 degrees with progressive crush. Not sure if anyone has done that before so please give me feedback on its performance…
Fit tightly to the inside of a lynx muzzle and keyed for 40cm. Alternatives provided if your barrel pushes the notch too far forward (marked as the tenths of a mm it's moved).
Find an improved and tested version of this model here I modeled this in Onshape but keep in mind, this model has not been tested although i think it should work fine but it probably will reduce FPS a lot because of the FDM layer lines.…
this pcar which works for almost any blaster will significantly improve the accuracy it is important that you print this model slowly because of the tall thin extrusions. I would print everything under 100mm/s with a corexy printer. under…
Took the heavily ported quadvictus RIPPCAR out of the other design and made it standalone. Print nose down.
A quick remix of Salvagedcircuitry's Jeep Switch Blank to fit a Toyota Troopcarrier 75 Series Dash. Tight fit so I used beeswax on it. PETG
This is a lengthened Silly SCAR that allows you to fire Mega darts instead of Mega XL! Why? Well, because I like my faux “suppressors”, and I have a ton of Mega darts and basically no Mega XL. And hey, your gamemode may use Mega XL as a…
I've fixed the funnel at the bottom of the MEGA version, since it had a step in it that required supports to be printed correctly and prevented the correct sealing via o-ring. Print it as per Sillybutts instructions: 5 walls and 15% infill.
The original model of the Mega Modded Silly Scar only came in a 3 line version, so I added a 6 line version using the Silly Scar Simple Redesign model. I have had great success using the 15% infill, 5 walls profile recommended by the…
Want to put a PCAR on your Deuce Pro but still do it in style? These Deuce Pro frontends are designed to hit sub 130FPS while having a scar to maintain accuracy. These frontends will still allow you to put the blaster in the provided…
Dictator Scar to bring it under 160FPS, has porting, shoots lasers
Silly loudener (Pun intended) that is hopefully not that obstructive. You will also need to print a collet from the original files (make sure to give silly a like also) and a 16mm ID o-ring to get a functioning seal. Print upside down,…
I don't like the long barrel sticking out of my blaster. So I designed a ‘suppressor-like’ thingie to hide my BCAR or PCAR while at the same time making it a little more tacticool (or for some, might just find it ridiculous). I'm using…
Heavily inspired by Thanh's RIPPCAR (https://outofdarts.com/products/thanh-rippcar-variable-line-segmented-sla-printed-resin-pcar) Haven't tested it a ton but it's worked real well on my Lynx and Kunlun so far at the 250fps mark. Before…
it is a weird print, probably super fragile, and inconvenient. use at your own enjoyment
The bayo-"not". Fits the RIPPCAR by Thanh TPU ONLY! This will likely still fit with rigid filament, but the TPU squish is what makes it protective Settings: 2 Walls 3-5% cubic infill No supports
This is a low-profile single-piece friction-fitted PCAR muzzle attachment for Nerf hobby grade barrels. Designed to maximize accuracy but with minimized frictional losses with printed rifling. This version 2 is refreshed with new Rotated…
The EasyPCAR is a PCAR muzzle attachment for Nerf hobby grade barrels that has the best single-piece friction-fit design for a no-frills means to accommodate any standard barrel diameter (16mm, 5/8"ths). Add rifling to any exposed barrel…
The EasyPCAR is a PCAR muzzle attachment for Nerf hobby grade barrels that has the best single-piece friction-fit design for a no-frills means to accommodate any standard barrel diameter (16mm, 5/8"ths). Add rifling to any exposed barrel…
This is the ideal choice of PCAR if you want both the Silly Spigot mounting system as well as Thanh's new RIPPCAR geometry. Variations The internals of every variation are the same as the RIPPCAR, the only thing that changes is the outer…
The Little Rocket PCAR is a simple 5-line PCAR adapted to attach to Little Rocket Barrel Adapters, like for the Nexus Pro and other "Pro-Max" blasters. This allows you to leave your Little Rocket adapter on your blaster without…
Introducing the Fractal Nerf PCAR! This centering device is a remix of Thanhtacles' RIPPCAR which provides aesthetic improvements and adds RedCowl's collet geometry for toolless and simple installation onto any 16mm barrel. No hardware is…
The Little Rocket RIPPCAR is a variation on the PCAR I adapted to attach to Little Rocket Barrel Adapters. Featuring Thanh's new "Rotated Intermittent Protrusions" segmented-line 18-degree progressive twist, this rifling attachment…
The Pro-Max RIPPCAR combines Thanh's Whisker PCAR v2 with a 19mm OD base to adapt it to attach to the Adventure Force Nexus Pro, X-Shot Fury X, and other blasters. Featuring Thanh's new "Rotated Intermittent Protrusions" segmented-line…
étagère permettant de stocker au frais l'insuline et le glucagon dans la porte de mon réfrigérateur
Like my previous vase mode SCAR but with new flute geometry inspired by the RIPPCAR . Fits nicely in a Lynx or a Lunx . Print settings: Brim Vase mode No bottom layers 0.6mm line width Orient the numbers upside down The smaller the layer…
Took the Remnant Muzzle and added the RIPPCAR to it. Follow RIPPCAR printing recommendations.
Liked MakersHelpCare's remote holder design but it didn't fit my couch so remixed a thinner mounting plate. https://www.printables.com/model/379390-hex-couch-sofa-remote-holder
Shoot Through PCAR Silly Shell Adapter ! Integrated a "Rippcar" into Corvus's adapter with a silly collet female… Dumped the BCAR idea as it had too much pressure drop and replaced with simpler and more functional integrated PCAR. So the…
I was struggling to get good accuracy from my Protean, and after success with the StryfeX barrel lug with pcar and a tight bore barrel after it, I replicated that setup for my Protean This uses the 14.0 T barrel as its base, and lengthens…
This is a cutdown version of the Tangent PCAR by Chance. It has the 60 degree rotation.
A remix of my Fat Boy bcar shroud that fits the Adventure Force pcar instead. Also works great with their bcar if you choose to use the optional clamp. Same instructions as the original but includes new shroud/base designs and a new front…
This pcar let's you pop off MXL and use the blaster as designed! PCAR uses 8 degree inverted rifiling. Fits inside adventure force muzzles. ENJOY!
étagère permettant le stockage de mes cartouches d'insuline NOVORAPID PUMPCART dans mon frigo INDESIT avec un emplacement pour le GLUCAGEN
Direct swap for muzzle - 2 positions for pulley with integrated 7 degree PCAR, Sharing by request – Its was an experiment to make the barrel length longer and tighter as well as increase the usable length of the elastic cord… The…
Straight pcar for the Venom Pro. Replaces the orange faux barrel. Scale as necessary to get a firmer fit.
Just a straight PCAR for the blink. replaces the muzzle and requires supports on the ring
Print with supports Hardware: M3x20 screw around 3 inches of 4mm cord (same as Leedle Dynamics' cord) 016 o-ring for mounting
View all files at https://pngu.info/files Printing: Print with 5 walls to avoid infill, the parts are pre-oriented and shouldn't need to be changed Description: A hot swappable shroud can easily be screwed on and off enabling mono-color…
replaces the orange tube in the venom pro, does drop the fps but it wont jam nearly as much as DZ's pcar
The original one did not actively grip the dart at all, and when I tested the PCAR darts would fishtail This one should have a stronger grip but with an FPS reduction.
THE NEWEST BCAR I POSTED CAN BE PRINTED WITHOUT SUPPORT. IT LOOKS BETTER AND IS EASIER TO PRINT. The BCAR is set at 10 degrees with progressive crush. Not sure if anyone has done that before so please give me feedback on its performance…
Fit tightly to the inside of a lynx muzzle and keyed for 40cm. Alternatives provided if your barrel pushes the notch too far forward (marked as the tenths of a mm it's moved).
Flush 3x but with RIPPCAR geometry. Idea by Deathtree Works on my goblin. Can't tell if it flies any straighter. Also 4x if you have heaps of power to spare
Find an improved and tested version of this model here I modeled this in Onshape but keep in mind, this model has not been tested although i think it should work fine but it probably will reduce FPS a lot because of the FDM layer lines.…
this pcar which works for almost any blaster will significantly improve the accuracy it is important that you print this model slowly because of the tall thin extrusions. I would print everything under 100mm/s with a corexy printer. under…
A RIPPCAR adapted to fit into stock Dart Zone and X-shot muzzles! It can also fire MXL as a spigot. It also brings down the stock Nexus Pro X and Stryker 2.0 from 200 fps to about 165 fps for super stock games. Refer to the original model…
Took the heavily ported quadvictus RIPPCAR out of the other design and made it standalone. Print nose down.
I've designed this pcar to make the gears vector legal for sub 120 fps nerf wars (fps is measured with 1.2 grams workers). The flycore with hurricanes and krakens typically hits a bit around 126-129 with the 1.2 gram darts, which is a bit…
A quick remix of Salvagedcircuitry's Jeep Switch Blank to fit a Toyota Troopcarrier 75 Series Dash. Tight fit so I used beeswax on it. PETG
Remixed from WhiskerPCAR v2.0 RIPPCAR Trivictus model by Thantacles Shaped and resized to friction fit to 19mm barrel lugs such as on Dart Zone and Adventure Force Pro blasters (e.g. Nexus Pro, Stryker, Dictator, etc), has a cool…
Video: Video created by TM. Video plays faster than real time. Material Required 2x Steel Axle 2mm diameter, length: 100mm 2x Wooden Square Sticks 6x6mm , length: 50cm -> frame 1x Wooden Square Stick 6x6mm, length: 40cm -> lever arm 1x…
An M16x1mm threaded barrel attachment set for Small Lee, Kar98k, and more. Includes a replacement Orange tip and a simple 6-degree (?) ported 3-Line PCAR designed to add accuracy to the dart as it leaves the barrel. Highly recommended to…
This remix adds new inserts for the Ontos SillyHikari Scar by LS MODS . Also adds a knurled TPU ring to the barrel attachment base. This setup allows you to quickly switch between different *CARs while maintaining a consistent look. PCAR:…
This allows a DZ pcar to pass though. I used to run this with a 45 cm vorpal barrel but have since removed the pcar due to it running into the retaining pin, and preventing the proper seal between the barrel and turn around.
I was looking for solutions to improve the accuracy of my AIT Toys 40MAX Lightning blaster, and found the barrel upgrade by JC Works. But I'm lazy and didn't want to disassemble the blaster to try it. So I threw together a quick design…
The Chance Riot! Momentum Muzzle is an expermental alternative to the blank "no-car" muzzle device in the original fileset. Featuring six lines, this 0-degree PCAR mimics one of the muzzles from Eli Wu's Momentum. It should theoretically…
Swappable PCARs for Foam Dart Blasters (HPA & Springer) A set of printed PCARs for tuning spin on foam dart blasters. The idea is modular: print the twist rates you need, label them, and swap them in seconds to retune your blaster for a…
Swappable PCARs for Foam Dart Springer Blasters A set of printed PCARs for springers, for tuning spin on foam dart blasters. The idea is modular: print the twist rates you need, label them, and swap them in seconds to retune your blaster…
Update: 22/07/2026: Updated Model. How to Make Your Own PCAR Please see my other upload "Swappable PCARs for Foam Dart Springer Blasters" to understand what this is. Cheers Using the Fusion 360 file + PCAR Twist Calculator This walks you…
This is a remix of the original ForTwo 453 Phone Holder Platform to securely accommodate the OhSnap Snapcar 2.0 mount. Check out the magnetic car mount HERE if you want to know more about it. The model is otherwise the same. It can be…
A new approach to effective, light weight, and accurate nerf short dart suppression. Replace all of the heavy and volume-wasting internal baffles with nearly weightless synthetic maze material. Yes, its stuffed with polyester poly-fil…
this is a remix of the tenacious twist scar by TechnicallyTenacious. All I did was duplicate this twice (to make it 3 times longer) then I stretched it out to make it exactly 230mm long. This should be better for higher fps blasters…
Press fit PCAR for Xshot Longshot, using Thanhtacles 's trivicus 1.0. It fits the lines of the blaster well.
Replacement front piece for the Rival Pilot that turns it into a muzzle-loaded MEGA-only integrated-PCAR beast. 80-90fps or so. Highly recommend pairing it with the thumb-release at https://www.thingiverse.com/thing:5830514 and disabling…
Just a little wordless creditcard size helper. In case you're lost for words abroad. Print with your favorite settings. Advise to use smaller nozzle (<0.4) for sharp engravings. Color change at height 1mm. * You can of course also scale…
This is a lengthened Silly SCAR that allows you to fire Mega darts instead of Mega XL! Why? Well, because I like my faux “suppressors”, and I have a ton of Mega darts and basically no Mega XL. And hey, your gamemode may use Mega XL as a…
I've fixed the funnel at the bottom of the MEGA version, since it had a step in it that required supports to be printed correctly and prevented the correct sealing via o-ring. Print it as per Sillybutts instructions: 5 walls and 15% infill.
“So is this just another PCAR then?” Yeah pretty much. But it's a nice one. Only one part to print, with a snug barrel retention, copious venting for underbarreled applications, and multiple models to support different FPS scales. Is it…
Wickelkarte für Einfassband | Wrapcard for binding
I really liked the Tangent PCAR model, but I thought it would be useful to have a shorter version to keep overall barrel length a little lower. So I started with the 90-degree twist model (the most amount of spin) and shortened it up. The…
Inspired by hitchhiker's work on spiralised Hammershot cylinders: https://www.printables.com/@hitchhiker4200 https://www.printables.com/model/230232-inline-magazine-16-shot-hammershot-cylinder-oh-yes I found that their cylinders seemed to…
Open attachment, replace plastic barrel with this one. Done. This should match the rifling on the nexus.
Solid shroud for the worker PCAR. Designed for new ruling for SydNerf and for quick printing. Should fit 17mm OD barrels. Purely friction fit. Throw a rubber Oring behind the shroud to act as a friction set nut if its a little loose.
UPDATES: 15/09/2025 Addes 5 and 10 degree 6 line varients to each PCAR, potentially imparting some spin on the dart as it exits the barrel Added MS-GnK PCARs 16/03/2025 Chamfered the barrel of every PCAR to ensure the dart enters the pcar…
N1 SERIES PCAR/SCAR FOR USE WITH 16 OD 15 ID ALUMINUM BARREL. TWIST IS 8 DEGREES. ENJOY! NOTE: 100MM LONG FROM COLLET SLICE TO DESIRED LENGTH. REMEMBER SCALE MODEL TO PRINTER. BARREL FIT IS 15.90MM RIFILING IS 14.40MM
N1 SERIES PCAR/SCAR FOR USE WITH 19/32" BRASS BARREL. TWIST IS 8 DEGREES. ENJOY! NOTE: 100MM LONG FROM COLLET SLICE TO DESIRED LENGTH. REMEMBER SCALE MODEL TO PRINTER. BARREL FIT IS 19/32" OR 15.08MM RIFILING IS 14.40MM
THE FUTURE IS NOW!!!! THE PCAR NO 1 ASKED FOR BECAUSE NO 1 KNOWS THEY NEED IT YET!!!!! Cut down 45mm N1 darts have a 10in grouping at 160 FPS at 35ft out with this attachment. Print the N1 dart cutter from VileMods to get the correct dart…
THE FUTURE IS NOW AGAIN!!!! THE PCAR NO 1 ASKED FOR BECAUSE NO 1 KNOWS THEY NEED IT YET!!!!! Cut down 45mm N1 darts have a 10in grouping at 160 FPS at 35ft out with this attachment. Print the N1 dart cutter from VileMods to get the…
I am currently embracing the N1 dart as an early adopter to see how far the new darts can be taken. Drawing inspiration from Dustin who I credited for the remix I made my own 5 line PCAR using 8 degrees of twist. I went with a lower twist…
The Trivictus PCAR spirals in the DartZone SCAR dummy model. 4 walls 100% infill
I shoved a SCAR on the front of the snub barrel. Works well in the tests i've done.
This is a drop in replacement barrel for the Nerf Pro Sender that places a slightly modified version of Thantcles Trivictus PCAR on the cage side of the barrel allowing immediate centering correction.
This only works for older models of the Venom Pro. Newer ones shoot hotter. Please find the remix that brings the FPS down further below 120. Got a Venom Pro but it's shooting too hot for 130FPS? Fear not! An insert for the Venom Pro…
Adapted Silly's PCAR to his barrel. Need the bolt from the LHTCU's front magwell, cut to length.
