Shoot Through PCAR (Rippcar) Silly Shell Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shoot Through PCAR Silly Shell Adapter ! Integrated Thantacles' "rippcar" into Corvus Silly adapter
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 28
- Makes
- 1
- Views
- 339
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Shoot Through PCAR Silly Shell Adapter !
Integrated a "Rippcar" into Corvus's adapter with a silly collet female… Dumped the BCAR idea as it had too much pressure drop and replaced with simpler and more functional integrated PCAR.
So the goal was to have a PCAR for accuracy in the Foxbat and then be able to fire Silly Shells without compromise ;) Yes there are BCARS / PCARS shells but to use them as a shoot through was problematic as the alignment had to be reliably near perfect. I could not never it to work as well as a dedicated PCAR / BCAR directly attached to the barrel - so I mashed up this.
The front + PCAR section was trimmed to minimize the length. Still looked kinda ugly so I added some cosmetic knurling and slots. Works great !
Notes:
Your printer need to be dialed in as required to print a good PCAR. I lightly hit the inside with 320 sandpaper and bit of heat to smooth the ridges. See Thanhtacles' link for details.
My print settings - YMMV - No supports. 0.4 nozzle, PLA +. 5 walls, 20% infill