Counting matching models…
This is the ultimate “do-whatever-you-want” cup! Use it as a pencil holder, drink from it (if you’re feeling brave), or toss it, your call. It’s your cup, your rules! Note: The render is a coloring concept and will not be printed in color.
Hi Guys, I created a spacer for the Shotgun Pro Seat. It works with every bike that has the Acros Cable intergration through the Headtube. Just directly put the Shotgun Spacer Cable directly onto the Top Cap, where the cables are coming…
Remix of the alktopus. Changed the bottom part to fit Shot Glas with approx. 35mm in Diameter and 55mm in height.
Since I always get asked if I 3d print guns... I decided to design a rubber band gun (for Anna). You need: 8 times M4x10 screws 2mm diameter metal pins: (or 2mm thick nails) 3 times 25mm long 2 times 10mm long Download the barrel from:…
My M1887 dart blaster didn't come with a bird's head grip, but rather with a not-so-convincing stock. I drew up a printable version. It doesn't fit the curvature exactly, but is still comfortable to hold none-the-less and gives a nicer…
These protectors are designed for the two cellar shots on Whirlwind pinball. On my game these were pretty worn, so these will both protect the game from further wear as well as make the shots closer to the original tolerance. They fit…
I couldn’t find a choke tube holder that seemed practical for field use, so I designed this. These holders are made to fit 12-gauge shotgun choke tubes. The dual version has holes for attaching it to a lanyard or similar, and both…
I made this for my Doomguy cosplay. It should be 12 gauge, I used measurements I found online that might not be accurate. -Use for cosplay, short films, display piece, etc. -Should not be used with real firearms -Please use responsibly…
I printed it with PETG, and it works fine as long as you don't apply too much force when using Print with an infill of over 30%. For the last couple of layers, you can print with a different color.
Shotshell box holder for 20 gauge shells. Paint on supports for belt clip, no other supports needed. Second design made for this belt adapter https://www.thingiverse.com/thing:1494715 Please like and give feedback.
Mega Barrel for the Pick-Rocket 2 X-Shot Skins Menace Remix After seeing the model and remembering that the menace could launch Megadarts (tnx @Corvus_1914958), I knew there was more potential being left on the table. Someone just had to…
Tested on 2023 Polaris Slingshot SL series as a additional small storage bin that fits the center console of the Slingshot. It is easy to remove or keep in place and makes for a nice finish look for those of us who seldom use the CUP…
🔫 Bullpup Shotgun – 3D Printed Tactical Short-Frame Shotgun Replica Bring modern firepower to your 3D printed arsenal with this Bullpup Shotgun model — a compact, futuristic shotgun design where the action and magazine are located behind…
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the Benjamin Marauder. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the…
These parts make a Panzer MAG12 shotgun easier to use. The original equipment safety selector switch and mag release leave a lot to be desired so I designed these to be easier for the user to toggle. The original right side safety…
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the PP800. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the pellet is…
A replacement game insert for the 1982 card game Slapshot. https://boardgamegeek.com/boardgame/1705/slapshot I simply made the 3 ‘bin’s slightly bigger to accommodate my Mayday MDG-7044 sleeves.
shotgun ultrakill for dummy13 V1/V2 articulated: https://cults3d.com/:3117128
⬇ Files for download are available on Files → Other Files → Flick 19X Files. All project files are in .zip archive ⚔ Toy guns are back. ⚔ ⬇ Files for download are available under the Files tab. All project files are in .zip archive Flick…
Description A friend of mine uses Hot Shot's EDT at every fill-up and needed a secure, accessible way to store the bottle in his truck. I designed this magnetic holder so it can be mounted directly to the inside of a truck bed for quick…
The X-Shot Pro Piston Pump AEB Barrel Shroud is a stylized muzzle to cover the exposed barrel of the X-Shot Skins Pro Motorized Piston Pump AEB. Featuring a Picatinny rail and M-Lok-compatible slots, this shroud allows for the mounting of…
Multiple sizes available ranging from 1mm to 5mm. Great for those who wired in a smaller lipo. Stack together for custom sizes.
Level up your X-Shot Longshot with this all-in-one front end designed for both performance and aesthetics. Tired of simple, flimsy, or ill-fitting designs? This isn't a remix—it's a complete redesign built from the ground up, blending the…
I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…
This 3D model is designed to hold small shot bottles, such as "Kleiner Klopfer," "Gaudimax," or similar bottle sizes. It accommodates bottles with a diameter of 35mm and a height of 95mm. The holder provides space for up to 12 bottles,…
If you enjoy my creations/remix, feel free to support me via buy me a coffee- https://buymeacoffee.com/spydergiant This is my own X-shot MPP shroud that I modeled and designed to try to make it look as factory"ish" as possible. Side…
IMPORTANT UPDATE: DON'T PRINT version 1.01 of the XL handguard. There was an issue resulting in a 3mm gap towards the rear. Please print the new 1.02 version instead. This issue doesn't affect the M and K versions. Handguards for the…
A handguard for the Motorized Piston Pump by XShot. There is picatinny on the 12 o'clock position and usable M-LOK on the sides and bottom. Slides over the barrel collet from the front. 2 bolts clamp it down. .stl comes pre-oriented. .stp…
see @LoneWolf052 ‘s profile, he did all the work on this model. You can still print without support and you’ll need the same hardware to lock the barrel shroud in place. A (longer) handguard for the Motorized Piston Pump by XShot. There…
⚔ Like a Flick 19X. But much better ⚔ ❤ Subscribe to my Boosty https://boosty.to/myuto There is a free subscription, you can read news, see announcements and take part in polls 🎥 Full video uploaded! -> https://youtu.be/1q5rlmCZgGU ⬇…
Picatinny/1913 rail sidesaddle holder for 5x .45LC or .410 Shotshells. Designed for the Rossi Brawler, but should work with any rail-equipped firearm in .410 or .45LC. Print 1x of this model, and 1x “smallside” from the original. 1x M3…
So! The preamble: This is a shell for the X-Shot Micro 2.0, the newest tiny blaster variant from X-Shot/Zuru. All the hardware you need is already provided by this Micro, too. (Well, except for a few common household rubberbands and some…
Slinghshot Wake Logo 2024 for Keychain or other stuff. Adjust the dimension and add one or two 3-4mm hole to make a keychain or necklace or wristband.
Update 1 ; 4/30/2026: I added a full length chain file so that it doesn't have to be printed in three parts. Update 2 ; 5/1/2026: I fixed the sizing of the screw on Hookshot_P2, so use the one that says fixed, and not the one that says DO…
Hey there, Makers! 👋 Get ready to print your very own Ensis M5000S , a super cool toy rifle inspired by the sleek and elegant design of the ORSIS T5000M. This isn't just any toy; it's a fully functional model that uses a rubber band…
Meine Frau und unsere Tochter basteln mit Vorliebe Karten aller Art und zu jedem Anlass. Dazu verwenden sie die elektrische Stanze Big Shot der Firma Sizzix, welche leider nicht mehr hergestellt wird. Dementsprechend gibt es auch keine…
intrushions must be 3 ft away and must make in less than 10 trys
Print anyway you like. All you need is to build a board big enough to hide your ships.
Keep your fishing gear neat and accessible with this 3D printable dropshot weight organizer, custom-designed to fit inside the Plano 3700 tackle box . It may fit the Plano 3750, but I haven't tried it. No more digging through a tangled…
This is an optional upgrade for Fat Shot 617 - Medium format 6x17 modular panoramic film camera . It replaces the top part of the cassette and adds the mechanism that displays the frame number the camera is currently shooting. WARNING :…
This is a remix of the Terrier Handguard from LoneWolf052 and the bottom Picatinny rail from the Utonagan Handguard Remix from HoneyBajjar. I wanted to have Picatinny instead of Mlok for the bottom rail of the Terrier since I liked the…
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the Fx Impact. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the pellet is…
The hole is 3.7mm wide by 4.6mm deep. Make sure your inserts are about 1mm wider than the hole (so there's plastic to grip) and not as deep.
A remix of the model made by @Mike81622, added a few ergonomic features, and change to attach it to the the Tek-Lok style belt clips.
This is a simple re-shell for an X-Shot Menace that is supposed to look like a Nerf Nite Finder. Prints with no supports. The tip threads onto the body. Holds 2 extra darts below the barrel,. I believe there can be some different…
As requested this is a single shot sled version of my Lee Enfield Magazine. I have yet to test it at a range but using dummy rounds it will cycle perfectly. You have to press the magazine release when loading the magazine for the most…
This is a kit to convert the Fury-X to use pump action priming. Requires: 4 M3x30 screws 4 M3x10 screws (or 2 M3x10 + 2 M3x12) 8 M3 hex nuts Optional: 4 693zz bearings (instead of provided bearing model) 2 M3x30 screws for pistol grip 2…
Friction fit lens cover for a Canon PowerShot SX240 or SX260 digital camera. Designed to be attached with a small keyring to the camera's wrist strap. May or may not be able to pop off on its own when the lens extends. Printing in PLA is…
I printed in PETG. A 0.2MM layer height leaves the top fairly rough, but it seems to feed well. I printed the sample in the picture with 15% infill and just 2 wall layers as a test. I'm planning to do another in 35-50% and 4 layers once I…
Hello everyone! This is a 3D printed shell designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, and I have several ideas for fun parts to make for it. The first and most obvious…
ITS AVERAGE!!!! - slightly longer barrel (230mm stock> 120mm >80mm 'micropp') and is an optimised and tested length with higher accuracy and MUCH less drop over ~10m . Probably best for 150fps cap games but don't have a chrono :/ * EDIT I…
An efficient Hardlight launcher from Halo Infinite for your Dummy 13!
Included Files: Body Left Side Body Right Side ALternative Body Right Side for usage of 5x M3x6mm Heat Inserts and 5xM3x6mm Screws ScrewOn Barrel Ring ScrewOn HalfDart 2x Inline Clip Barrel ScrewOn HalfDart 3x Inline Clip Barrel Top Slide…
This is a case that holds the set of format masks for the Fat Shot X camera: Each slot is for 2 masks of the same size, pressed against each other with their flat sides (numbers out). Top side is a snap fit and relies on the flexibility…
Recent updates 2026-02-23 : Fixed mistakes in the model. Uploaded new versions of both front and rear parts. 2025-02-12: Added flat sections on the curved front face of the " FSX Focusing Screen Rear " for a purpose of attaching decals…
Here's a quick print to transform your Nerf Hammershot into a Wingman, from Apex Legends. It is a mostly reversible mod, the only changes that need to be made is the orange front iron sight needs to be removed. The parts are friction fit;…
Hello everyone! This is a 3D printed replacement stock designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the stock was a bit too short for my liking. So, I set out to design…
Simple display shelf initially made to show off shot glasses. Shelf can be printed vertically with no supports.
Print them however you want to the choice is yours enjoy!
If you have an X-Shot Micro 2.0 reshell, your plunger rod can break easily, so here is a fix. Print it in PETG. You can use PLA, but I don’t believe it will survive for as long. Also, print it on its side.
It's well known that one of the main problems in slingshot shooting, posture aside, is properly releasing the pouch. Small asymmetries in the attachment and awkward movements of the thumb and forefinger cause inaccuracy and poor…
Hello! Releasing my first model for public consumption in the form of a quick deadspace filler for the X-Shot Ejector. This will require you opening up the blaster and the plunder tube assembly, but the part friction fits with the system.…
A simple spacer that eliminates dead zone on the FIRE button of The QuickShot II joystick. If the spacer does not fit tightly on the FIRE button pin, use a small amount of glue to secure it. The photos show the FIRE button pin, the micro…
Description This is a 49.9ml (1.69oz) shot glass. With 6 walls it has a good weight on bottom so its very stable. Rounded corners for easy cleaning. Print at .12mm layer height for smooth finish. Shot glass in pictures was printed in…
the Print-in-Place Chain is to be put in the blaster with the open end of the chain link facing up it is able to click together with the original chain or more prints of itself the model includes sections of: a single chain link five…
Wanted a mag holder on the rear so i combined these two models
I can't stand the way the coffee from my grinder always falls on my counter and the wet shot glasses make a mess that I gotta wipe up. This thing aims to fix both. The shot glass portion has risers so if you put a wet shot glass in,…
FPS Optimized Rear Loading Shell ---> for Short Dart + Elite Dart for the X-Shot Excel Ejector Shell Blaster Load short darts into the shell without ramrod due to rear loading. Easy loading of the shells due to the optional loading tray…
Iron Sights -- X-Shot Excel Ejector Shell Blaster Hardware free. Picatinny rail mounted. I adapted my one piece iron sights bar so that the shape and length fits the rail of the X-Shot Ejector. Other X-Shot Ejector Shell Blaster stuff:…
If you do not like/want the stock to expand when pulled, and only expand when the lever is depressed, swap out the internal latch for this model. I did champfer one edge as a compatibility edit. There is a version without supports if you…
Using the Hyperion 2A aluminum heat-set insert QD sling mount, and several sizes of metric drill bits, you can add an extremely strong sling mount to your longshot, capable of withstanding the harshest play. You will need: Hyperion 2A QD…
May Cause Physical Harm Print And Use At Your Own Risk DO NOT USE AS WEAPON MAY CAUSE SERIOUS BODILY HARM
Hello everyone! This is my remix of N8thin 's beautiful X-shot MPP Stock-ish Stock model. I loved the stylings and feel of their stock, but I wanted a version that was a little bit longer to fit me better. So, that's what I set out to…
Basic shroud for XS CL, made in F360. I printed this but it didn't fit properly, so this newer version should allow a little wiggle room. Included both longer and shorter pieces, long one is about twice the size of the stock barrel. Print…
The Verdigris is a BCAR shroud to give the front end of the X-Shot MPP an aggressive makeover. It's easy to print with no supports and friction-fit for easy installation, so you can get back to the field ASAP! I've included both the…
An articulated shotgun for the dummy 13 that can be posed to look like it is reloading and such. Will most likely need a little bit of supports but otherwise should print fine. Please post makes so I can see how it looks!
A minimalist 2D wall shadow that every gamer and shooter fan will love. 🎮🕹🔫 Minimalist 2D Wall Shadow Shotgun Decoration - Gaming & Shooter Room Decor. Looking for a clean, modern wall decoration that’s easy to print and perfect for a…
A minimalist 2D wall shadow that every gamer and shooter fan will love. 🎮🕹🔫 Minimalist 2D Wall Shadow Pump-Action Shotgun Decoration - Gaming & Shooter Room Decor. Looking for a clean, modern wall decoration that’s easy to print and…
QD Sling was used for a day crawling though tall grass, dropped onto sling multiple times for sidearm use. Normal sling will fit too. This model is ambi for those left handers out there! Test fit and drop before use! Printed in petg 50%…
This model displays the Cannon PowerShot SX260 HS Camera in a cool and stylish way
Scrooge's Shotgun, The Door Knocker, Lincoln's Revenge - the Pennyshot Derringer! A 'working' derringer toy from the videogame Hunt Showdown - a clever, homemade-looking last resort. This does not fire anything - just a fun fidget. The…
Lengthened stubby front end with mlok + upper rail. Uses M4 hardware for the upper rail.
This model introduces a grip for the skeleton Nikki making it more of a slung secondary type Blaster the different handles include a A or ordinary handle handle with the Picatinny stalk attachment point and with N-strike stock attachment…
This is great for mass production of slingshot ammo that you can use. I made this because i couldn't find a single thing that would be good for shooting off it. Have fun! Cruzerthebruiser DO NOT SHOOT AT A HUMANS OR ANIMALS!
This is a single shot mod for the 6.5 carcano created using the 2 models listed below. https://www.thingiverse.com/thing:5766167/files https://www.thingiverse.com/thing:4714469
The original cage has evolved slightly. The right handle has been replaced by a knob so kids can better reach the shutter button (age 6-10). Model for smaller hands:
Was inspired by a few posts on reddit of these minimalist and pocketable slingshots. This is my first crack at 3d designing and I will say its not the most comfortable slingshot. This is sized for a medium/large hand. The tolerances on my…
This is a minimal, easy‑to‑print shot glass designed to double as a small measuring/dosing cup for kitchen or workshop use. It may be suitable for drinking if you choose an appropriate filament and print settings, but use it at your own…
The rubber-like cover on the battery compartment lid of the Canon PowerShot SX210 SI becomes brittle over time. Unfortunately, I couldn't find this part as a separate replacement part. So why not try 3D printing? I made the middle part…
PMAG 10 7.62 AC - AICS Short Action single shot sled. Best way to install the sled into a magazine is to remove follower/spring/base plate, insert sled first then rest of the magazine parts.
