Easy Bolt Action + T-Pull Mod X-Shot Fury-X (simply slide over the picatinny rail)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy bolt action + T-pull mod for the X-Shot Fury-X. Just slide it over the picatinny and fix it with the printed pin.
- Rating
- 4.917 / 5
- Likes
- 102
- Downloads
- 831
- Makes
- 16
- Views
- 5,762
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: additional versions with EXTENDED bolts
------------------------------------------------------------
Easy Bolt Action Mod ---> X-Shot Fury-X
To make the FuryX, bolt action or T-pull primeable - just slide it over the rear picatinny rail and fix it with the 3D printed pin.
Because this attachment covers the sights of the blaster I have put some new sights on the top of it (with holes for some small pieces of colored 1,75mm filament for better visibility).
For the left-handed people I also added a mirrored version of the bolts.
Other Fury-X stuff can be downloaded here.
Update 19.1.2025:
I added a Version with T-pull:
→ FuryX_T-Pull
___________________________________________________
Update 23.1.2025:
I added some bolt-action versions with bolts farer ahead placed in the middle of the blaster:
→ FuryX_Bolt_FRONT_(both_sides)
→ FuryX_Bolt_FRONT_(left_side)
→ FuryX_Bolt_FRONT_(right_side)
___________________________________________________
Update 15.3.2026:
I added some bolt-action versions with EXTENDED bolts:
→ FuryX_Bolt_FRONT_(both_sides)_EXTENDED
→ FuryX_Bolt_FRONT_(left_side)_EXTENDED
→ FuryX_Bolt_FRONT_(right_side)_EXTENDED
→ FuryX_Bolt_REAR_(left_side)_EXTENDED
→ FuryX_Bolt_REAR_(right_side)_EXTENDED
I've also added an OPTIONAL Ball_Knob suitable for the versions, called FuryX_Bolt_FRONT.This can be attached to the bolt and secured with superglue.
Please try it out to see if you like it before gluing it on.
I personally find it quite comfortable to grip.
----------------------------------------------------------------------------------------------------------------------------
The files are already pre-oriented:
My print settings for PLA:
0,2mm layer height
7 walls
30% gyroid infill
7 top and bottom shell layers
NO supports needed (the optional Ball_Knob needs supports!)
use a brim if you have poor print bed adhesion!
If the pin is too loose or too wide due to printer tolerances, scale it a tiny bit up or down in your slicer (but DO NOT scale the length).
Thanks to Chance for the file I could use for this remix.