1 / 13
Easy Bolt Action + T-Pull Mod X-Shot Fury-X (simply slide over the picatinny rail) — zdjęcie 1
1 / 13

Easy Bolt Action + T-Pull Mod X-Shot Fury-X (simply slide over the picatinny rail)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy bolt action + T-pull mod for the X-Shot Fury-X. Just slide it over the picatinny and fix it with the printed pin.

Ocena
4,917 / 5
Polubienia
102
Pobrania
826
Wydruki
16
Wyświetlenia
5732
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: additional versions with EXTENDED bolts
------------------------------------------------------------

Easy Bolt Action Mod ---> X-Shot Fury-X


To make the FuryX, bolt action or T-pull primeable - just slide it over the rear picatinny rail and fix it with the 3D printed pin.

Because this attachment covers the sights of the blaster I have put some new sights on the top of it (with holes for some small pieces of colored 1,75mm filament for better visibility).

For the left-handed people I also added a mirrored version of the bolts.

Other Fury-X stuff can be downloaded here.

  • Update 19.1.2025:
    I added a Version with T-pull:

    → FuryX_T-Pull
    ___________________________________________________
     

  • Update 23.1.2025:
    I added some bolt-action versions with bolts farer ahead placed in the middle of the blaster:

    → FuryX_Bolt_FRONT_(both_sides)
    → FuryX_Bolt_FRONT_(left_side)
    → FuryX_Bolt_FRONT_(right_side)
    ___________________________________________________

  • Update 15.3.2026:
    I added some bolt-action versions with EXTENDED bolts:

    → FuryX_Bolt_FRONT_(both_sides)_EXTENDED
    → FuryX_Bolt_FRONT_(left_side)_EXTENDED
    → FuryX_Bolt_FRONT_(right_side)_EXTENDED

    → FuryX_Bolt_REAR_(left_side)_EXTENDED
    → FuryX_Bolt_REAR_(right_side)_EXTENDED

    I've also added an OPTIONAL Ball_Knob suitable for the versions, called FuryX_Bolt_FRONT.

    This can be attached to the bolt and secured with superglue.

    Please try it out to see if you like it before gluing it on.

    I personally find it quite comfortable to grip.

----------------------------------------------------------------------------------------------------------------------------

The files are already pre-oriented:

My print settings for PLA:
0,2mm layer height
7 walls
30% gyroid infill
7 top and bottom shell layers
NO supports needed (the optional Ball_Knob needs supports!)
use a brim if you have poor print bed adhesion!

If the pin is too loose or too wide due to printer tolerances, scale it a tiny bit up or down in your slicer (but DO NOT scale the length).

Thanks to Chance for the file I could use for this remix.

Tagi