Liczymy pasujące modele…
No Hardware Mini Iron sights Picatinny Compatible Designed for small blasters such as the OFD Hana ~10g of filament All parts are pre-oriented for no supports (if your printer can do a single 10mm bridge) Print two of the body you prefer,…
Designed for a shotgun with a picatinny rail and no iron sights. The 24mm holes were picked to show the potential pellet spread after some experimentation with shells an cardboard at distances I've needed a shotgun (20-100 ft) using…
It's pretty simple. Dots for your iron sights made of filament. Jam filament into the hole with some super glue and you have some nice circles to line up for your sights.
Looking to have a mainly printed set of sights? Not really sure if you want to hit anything? Look no further here is a quick dirty CAD I came up with its better than no sights. Make sure to print in orientation included in the photos (…
Elevation adjustable, fixed windage. Based on a 20" (508mm) sight radius. Would be suitable for most carbine length replicas, but probably doable for some of the shorter ones. The small ears on the side of the base help protect the sight…
the idea of this mod is to make the parts slightly stronger. so there is less chance of the hole ripping open wile screwing in the bolt. you should not need to have to heat the bolt for this model. so less chance of deformation. also keep…
I wanted to make a fiber optic front sight for my Beretta Neos. The downloadable file contains 3 different sights. One is a direct replacement for the stock sight, one has a “painted in” triangle in place of the "painted in" round dot,…
Have you recently taken the Insights test or are you providing this test to others? Then this cheat sheet will come in handy. Please see below for an 8-page printable cheat sheet
Minimally usable “iron sights” to keep on a picatinny rail when the normal optics / sights are removed. The ghost ring and post is accurate enough for some plinking with a .22 or air rifle and stays in place with just friction. Light…
UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…
These are available in 1, 1.5 and 2 degree pitch options. i recommend trying 2 degrees for 70-100fps, 1.5 degrees for 100-150, 1 degree for anything above that. a 30mm raiser is included for blasters with a very flat top like the nexus…
Extremely tight fit. Will need filing. Not flip up. No adjustment. Just funny simple ironsights!
Blocky Iron Sights (combined in one piece) -- Barnacle for foam dart blasters with picatinny rail. I made these low profile, blocky style and clearly visible iron sights for my Barnacle. It's a bit of a loose fit at my Barnacle (but it's…
Iron Sights -- ONTOS hardware free for the Picatinny rail Adapted my one piece iron sights so that the shape fits better to the ONTOS (original) optic rail. The files are already pre-oriented. It needs approx. 20g of filament. My print…
Clip-On Iron Sights for the Nerf N1 Agility Blaster. It just needs approx 7g of filament. To remove, press upwards with your thumb from the bottom front on one side. The files are already pre-oriented. My print settings for PLA: 0,2mm…
Iron Sights + Streamline Hammer ---> Mods for Leedle's Calypso Blaster Pin mounted iron sights and a streamlined hammer for the Calypso blaster by Leedle Dynamics. The Iron Sight pins simply replace the top two pins on the blaster. --->…
Iron Sights -- X-Shot Excel Ejector Shell Blaster Hardware free. Picatinny rail mounted. I adapted my one piece iron sights bar so that the shape and length fits the rail of the X-Shot Ejector. Other X-Shot Ejector Shell Blaster stuff:…
A prototype of a scope mount i have been working on for airsoft or a small caliber rifle (.22/9mm) Use high infill, 4+ walls, and a tough filament for extra durability. I use PLA+ or PET-CF for this application. Hardware that is needed to…
Wanted to remix my SMILEY to look a little closer to the SMLE mk3 rifle and wanted functional irons, so this is the result. please note these are designed to be compatible with a 24mm outer barrel like used in the ryobicop files. I…
I really liked this kit from Ghost Manta, but I wanted to be able to insert filament into the sight post to allow for easier sight acquisition. Filament is friction fit, but you can add a touch of super glue as necessary. These should…
CZ 452 Brno Mod2 front and rear sights PLA+ and Orca Slicer's soft and adaptive variable layer height options.
Elevation adjustable, fixed windage. Based on a 20" (508mm) sight radius. Would be suitable for most carbine length replicas, but probably doable for some of the shorter ones. The small ears on the side of the base help protect the sight…
MOSPAS, short for Modular Open Source Picatinny Attachment System, is a free to use modular series of 3D models, meant for creating custom 3D printed attachments for a rail integration system (RAS) such as Picatinny or NATO rails.…
Intruduction These ironsights are remixed from the ones included with the files of the SLAB so the sight picture should be identical, if you don't count that the front sight is much further away than it would be on the rail. These were…
Hardware: Kitchen rubber band, most will work, mine have a diameter of 35mm when laid out flat M4*25 bolt and nut, one per sight This is a set of iron sights that uses a tiny rubber band to work, the sights will snap into the lowered…
Remix of Ruger Picatinny rail by RustyNail The cutout allows to use stock iron sights without detaching the rail I also made it about 0.8mm higher There seem to be no good orientaion for printing this on FDM printer. Best ones seem to be:…
Took Orthographic photos to get dimensions nice and easy. Notes: https://makezine.com/article/digital-fabrication/3d-printing-workshop/how-to-use-blender-to-design-3d-printed-parts-that-fit-real-world-objects/ * Take pictures from far…
Made a beautiful MS paint drawing on how it should be mounted and which orientation it should be held and fired in
Minimally usable “iron sights” to keep on a picatinny rail when the normal optics / sights are removed. The ghost ring and post is accurate enough for some plinking with a .22 or air rifle and stays in place with just friction. Light…
this is the blitz muzzle with a small and large iron sight option intended for use with my Faux red dot sight upper.
Basic hot shoe attachment that puts small iron sights on to help aim long lenses. The distance is pretty short and it is nonadjustable, but it's better than nothing. From experience a proper red dot sight is much more useful, although it…
UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…
This is a remix of the player box from js500's brilliant Unconscious Mind insert to fit my insights boards overlays and client/dream card organizers . (Be sure to print the “_thin” variants of my models to be compatible with this remix.)
These sights are designed to be used with large projectile firing blasters like Nerf Mega or Mega XL, for example i mainly use them with my Wildstyle. The name derives from the holes on the front sight that make the ladder unlike normal…
Introducing the Adriondack fixed iron sights! These sights are not intended to be precise pointing devices, but can still provide a decent picture on foam dart blasters. This kit prints without supports. This kit includes a front sight…
I wanted to have larger and clearly visible iron sights (with a bit of SciFi style) for my Nightingale 2.0 blaster and put iron sights directly on a flat section of the toprail. It can be attached directly with the two screws of the top…
These are some sights that you can attatch to picitinny, but it is also Christmas themed!
What started as a quick 30-minute CAD doodle—a set of super-simple picatinny iron sights—has somehow turned into a fan favorite. These little wonders cost just 64 cents worth of filament (and weigh 64 grams, because I like symmetry), take…
These are available in 1, 1.5 and 2 degree pitch options. i recommend trying 2 degrees for 70-100fps, 1.5 degrees for 100-150, 1 degree for anything above that. a 30mm raiser is included for blasters with a very flat top like the nexus…
I cut my remix of the Boom Grip for the Foxbat in height so that it fits the Corsair. Just slide it onto the picatinny rails. For the upper Picatinny, I built a version of the Boom Grip that has a rear sight and front sight so that you…
As a mechanical engineer working in the biomedical field, I designed this simple Total Hip Replacement Model to educate and inspire those curious about the mechanics of orthopedic implants. This 3D-printable system showcases the…
This 3D-printed replacement part is a precisely designed viewfinder for the vintage Snap Sights! underwater camera. Crafted to restore functionality to your classic diving gear, it offers durable performance and a snug fit within the…
Extremely tight fit. Will need filing. Not flip up. No adjustment. Just funny simple ironsights!
NOTE: 09/21/2025 G3 and G4 holsters for suppressor height front sights up to 10mm added. This is a pair of open bottoms TPU holsters for the Gen 3 and Gen 4 Glock 19. It will fit pistols both with and without a TLR6 tactical light. It…
Front sight slides over the front of the barrel and can be held in place with glue or tape. The rear sight is made to clip onto the dovetail rail and can be further secured with super glue if necessary.
Flip up sight remix with the Battle Axe in mind. Merged the aesthetic of the Caliburn Iron Sights with Brooklyn Tony's WildStyle sight functionality. You'll need: 4x M3 x 25mm Screw 1x M3 x 30mm Screw 5x M3 Nuts 6mm Diameter 7mm long ball…
Iron sights for Airsoft Grenade Launcher ironsights for my grenade launcher mount without screws (just put it on rail) inside holes put filament Print settings 0,2mm layer 4walls no supports
This is a simple pair of ironsights, stylized to match my Shellfish blaster. Print 3 of the pins. Prints are oriented for optimal printing. Consider using spare filament to fill the slots with an eye-catching color.
variation of picatnny sights by Mars1307. i created this due to a slight error in design : the crosshair came right off
This slider allows you to remove the rear sight with a red dot installed. One side is trimmed down to get the screw closer to the center of the rear sight when a red dot is installed. The original slider tends to get crush on the edge and…
Blocky Iron Sights (combined in one piece) -- Barnacle for foam dart blasters with picatinny rail. I made these low profile, blocky style and clearly visible iron sights for my Barnacle. It's a bit of a loose fit at my Barnacle (but it's…
---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- A pair of nice and simple picatinny attached…
Low Profile Iron Sights Bar -- rear and front sight combined in one piece -- hardware free Clearly visible and low profile iron sights for foam dart blasters with picatinny rail. If it sits to loose, put a small piece of 2mm crafting foam…
Iron Sights -- ONTOS hardware free for the Picatinny rail Adapted my one piece iron sights so that the shape fits better to the ONTOS (original) optic rail. The files are already pre-oriented. It needs approx. 20g of filament. My print…
The Manta-IS (iron sights) were designed to provide a clear sight picture and an easy printing experience. Only requires two M4x30mm screws to attach. After printing, trim three 6mm sections of filament. Use pliers to squeeze the filament…
Low Profile Iron Sights (NERF) Clearly visible and low profile iron sights for NERF tactical rails. Put a piece of 2mm crafting foam between the tactical rail and the iron sights to fix it. That works always great for me. Tested with:…
I remixed the Indra PIP sights by captainslug to accept 1,75mm Filament pieces like fiber optics. I also redesigned the fastening mechanism to M4 screws and nuts. I designed the railraiser rearpip based on the original rear pip design by…
Update 7/31/25: Added hybrid variation of the rear sight Update 7/30/25: Added V2 and V3 of the rear sight. Front sight is slightly lowered to account for dart drop and longer range of pro blasters. Models are print oriented. Cut 6mm…
Dart Zone Nitroshot Blitzfire2 Mods T-Pull + Printed Pin Rear Sight Insert for improved aiming Bottom Rail Cover for some additional color accent Spring Spacer (for the stock spring) All mods can be easily reversed if desired.…
Front Sight for the Nerf N1 Pinpoint So that you can at least hit something somewhat if you decide to aim throug the “scope”. After some trial and error, I think I've found a good height and shape so that you can aim through the fake…
Clip-On Iron Sights for the Nerf N1 Agility Blaster. It just needs approx 7g of filament. To remove, press upwards with your thumb from the bottom front on one side. The files are already pre-oriented. My print settings for PLA: 0,2mm…
Iron Sights Color Inserts __ Easy To Aim + Clearly Visible __ X-Shot MPP The line of sight is parallel to the barrel. Rectangular rear and front sights at same height for easy and quick aiming like classic open sights. It is best to print…
Found that the original didn't fit on the Picatinny rail that I had. Remixed tolerances for rail and filament. You will need to scale the pin. I found 95% (not length) to still be tight Print Settings Rafts: No Supports: No Resolution:…
Designed for a Sillybutts' Excalibur built using Out of Darts hardware kit (12" barrel, K31 spring). Each sight uses a single M3x25 socket head cap screw, to be driven directly into plastic (no tap or heat-set insert required, but be…
Low Profile (slide on) Iron Sights ---> Nerf Rival Knockout For me it fits perfectly but It's a tight fit (like the original rail cover/adapter by ehdrien) and I can imagine that by printer tolerances and depending on the filament used,…
Iron Sights + Streamline Hammer ---> Mods for Leedle's Calypso Blaster Pin mounted iron sights and a streamlined hammer for the Calypso blaster by Leedle Dynamics. The Iron Sight pins simply replace the top two pins on the blaster. --->…
Added a Ghost Ring sights on the Breacher's picatinny rail. You really cant see through both sights but still looks cool. You can insert a small piece of filament in the front sight.
Print with supports I recommend painting supports on the bottom of the angled part. Without supports there, mine looked bad. It could just be my filament or printer though. Apologies for the bad quality for the sight picture, it's the…
This is a remix of Corvus's Ontos iron sights with the SLAB 's iron sight geometry. Though this is intended for use on the Ontos, nothing is stopping you from putting it anywhere else you want to. Like the original's, you can also use…
Print with supports not only on build plate This does not work with the orange blaster it came with. Assembly photos are from a prototype, but I liked the ring version better.
These are QD backup sights that designed to only use a size 8 or white lego rubber band. They are not very accurate though because you cannot adjust them(something I hope to fix in the future) neither are they very low profile when folded…
Simply print in TPU and slap them on! These should work on any standard amazon open emitter airsoft sight, make sure to choose the correct cover for its corresponding sight formfactor. All files are pre-oriented for printing.
Print both sights with the flat face on the build plate. Shouldn't need supports. You can attach the front sight with tape or with a screw through it to stop rotation.
Print with original settings Put 1.75mm filament in the holes to look like fiber optic
Extra Low Profile Iron Sights Extra low profile, hardware free iron sights for foam dart blasters. Simply slides on the picatinny rail. If necessary secure them, with a small piece of 2mm crafting foam at the picatinny rail, like shown in…
Edits incoming: Small tweaks to the rail clamp have been made. New photos, pending reprint. Pic rail mountable fixed sights for nerf blasters. The front sight is 12mm shorter than the rear sight. This is to account for drop over distance,…
Picatinny compatible iron sight to spice up your airsoft gun and show how much of a memer you are. AMS: 2-color AMS profile No AMS: 3 pauses to swap filament manually Screw M4x25 tapered phillips head (2pieces) Nut M4 (2pieces)
I remixed this from https://www.thingiverse.com/thing:3370145 because the printed threads wouldn't work for me. So instead of the printed locking mechanism, its now using 35mm M4 screw and an M4 nut.
Introducing the Ducky Sights! Fully adjustable iron sights, with low hardware requirements. Perfect for high FPS foam dart blasters and maybe even airsoft. Compatible with both Picatinny and NATO Rails. Required Hardware 3x M4x30 DIN912…
Iron Sights __ X-Shot Micro 2.0 Reshell 7 Hammer-Action Iron sights to replace the Picatinny rail of the X-Shot Micro 2.0 Reshell 7 The Iron Sights are simply inserted, just like the original Picatinny rail, and then secured with the…
Iron Sights -- X-Shot Excel Ejector Shell Blaster Hardware free. Picatinny rail mounted. I adapted my one piece iron sights bar so that the shape and length fits the rail of the X-Shot Ejector. Other X-Shot Ejector Shell Blaster stuff:…
A prototype of a scope mount i have been working on for airsoft or a small caliber rifle (.22/9mm) Use high infill, 4+ walls, and a tough filament for extra durability. I use PLA+ or PET-CF for this application. Hardware that is needed to…
Requires only 3 (EA) M3 nuts and bolts. Also optionally requires a small amount of super glue. Print in orientation as imported into slicer, with supports touching build plate enabled. Adjustable rear sight is assembled in the same…
Wanted to remix my SMILEY to look a little closer to the SMLE mk3 rifle and wanted functional irons, so this is the result. please note these are designed to be compatible with a 24mm outer barrel like used in the ryobicop files. I…
I really liked this kit from Ghost Manta, but I wanted to be able to insert filament into the sight post to allow for easier sight acquisition. Filament is friction fit, but you can add a touch of super glue as necessary. These should…
I liked the height, the design and the adjustability and just didn't have the right screws at hand. So I adjusted the model for the M3s that I had. Because those didn't fixate the sights in the notches of the rail due to the smaller…
You need a metal RMR optic plate sold on ebay ~10€ for this sights to work. Sight is in front of the window, so not all RMR optics are compatible. Works with airsoft only. All gun sizes.
CZ 452 Brno Mod2 front and rear sights PLA+ and Orca Slicer's soft and adaptive variable layer height options.
Iron sights with simple set and forget adjustments. Basic elevation and windage using set screws. Height allows for co-witness or lower 1/3 co-witness on optics. The base is slim and takes up around one slot and one flat. Material - PLA+…
MOSPAS, short for Modular Open Source Picatinny Attachment System, is a free to use modular series of 3D models, meant for creating custom 3D printed attachments for a rail integration system (RAS) such as Picatinny or NATO rails.…
