Better Ontos Iron Sights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ontos Aperture Picatinny Rear Sight and Barrel-Collet Front Sight
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The Ontos is an amazing blaster, but doesn't come with a great solution for iron sights. Two small prints fix this and add a sci-fi M-16 look to the blaster.
M3x25mm Screw and M3 Hex nut required for the rear sight.
The included rear sight is an aperture sight, I recommend printing in a darker filament for best results. A few aperature diameters have been included, which tradeoff accuracy for sight picture. A larger diameter can also be helpful in low light environments. I find the 1.75mm to be a good starting place.
The front sight should be printed iron sight down, with supports for the rectangular nubs.
The Ultra-Low-Profile collet nut allows the front sight to be used with a 12in barrel and most rifling attachments. Otherwise the standard Ontos collet nuts work fine.