Single Piece SLAB-like Nerf Ironsights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A no-hardware single-piece Nerf ironsight which uses the SLAB's ironsight geometry.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 231
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Corvus's Ontos iron sights with the SLAB's iron sight geometry. Though this is intended for use on the Ontos, nothing is stopping you from putting it anywhere else you want to. Like the original's, you can also use some translucent green filament in the sight holes to get some pseudo-illumination in your sight picture.
You will need to print the pin found on Corvus's original sights.
Print in the same orientation as the original. No supports needed, but I recommend a brim. I went with 10% adaptive cubic infill, 3 walls, and 5 top/bottom layers, but feel free to experiment with more/less strength.
