M3 Adapted Ducky Iron Sights Variant

I liked the height, the design and the adjustability and just didn't have the right screws at hand.
So I adjusted the model for the M3s that I had. Because those didn't fixate the sights in the notches of the rail due to the smaller diameter, I modified both sights to add a clamping feature. This required to change the looks of the rear sight quite a bit, but I tried to maintain the aesthetics. The smaller screw diameter allowed for the front sight to receive a sliding piece with the looks of the rear one.
I also adjusted the holes in the sliding pieces to - at least with the tolerances of my printer - allow me to put in a piece of filament, which didn't fit with the original diameters.

For printing, the parts need to be laid on their flat sides. The channels for the sliding pieces work best when using supports in them. The rest of the parts should work without. I printed in PLA, 0,4mm nozzle, 0,16mm layers, 3 perimeters and 20% infill.

For this build you need
- 3 M3x30mm countersunk screws
- 1 M3x20mm countersunk screw (for the front side sliding piece)
- 2 M3 nuts

I recommend to at first screw the screws all the way in/through the sliding pieces in order to cut the threads before the main assembly.
The rest should be somewhat self explanatory.

I hope you enjoy this build.

Massive shoutout to @EnteFPV_2159792 for allowing and encouraging me to upload this and creating this amazing model in the first place.
This was basically exactly what I was looking for and I enjoy the comfortable height and the precision that can be achieved with this.