546 models
Please click if you appreciate my work :) Silence broken only by hybrid fury. This wall-mounted 3D printable model of the Porsche 919 Hybrid pays homage to the three-time Le Mans champion. With its centralized cockpit, wide aero arches,…
Print approx. €12.71–€15.54 excl. taxPreliminary estimate for one variant
Jednoduché a nenáročné řešení chlazení střídače Solax X3 hybrid G4, které za pomoci tří ventilátorů a termostatu W1209 umožní vyšší průtok vzduchu přes žebra střídače. Držák rámu je upevněn za neosazené průchodky CAN1/2 a DRM/OFF. Na…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Hello, I have designed simple dust cover for Volcano hybrid vaporizer from Storz & Bickel. You can print it with PLA or PET(G), or other materials. If you print it with PLA, be careful to firs cool down vaporizer. I printed with PETG…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET
Bandeja apoyabrazos MG ZS Hybrid+. Atención solo sirve para el modelo Hybrid+ 2024 - 2025. MG ZS Hybrid+ armrest tray.
Print approx. €13.31–€16.27 excl. taxPreliminary estimate for one variant
Wallmount for the Telekom Speedport Hybrid. Fits the 6,8mm thick and 164mm wide stand off the Speedport Hybrid.
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
Easy to make a Mouse and Squirrel hybrid keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Made this because an inside joke in my family😉 If you like my work consider Buy me a coffee 😊
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Created this as a gift to a friend who is designing prosthetics. Not an easy print with lots of supports.
Print approx. €16.92–€20.67 excl. taxPreliminary estimate for one variant
The side brush attachment for the EufyVac X8 Hybrid robovac comes with a very cheap silicone brush. Because it catches on everything, it gets ripped apart very quickly. Buying the replacement from the Eufy website runs about $5 per…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
I designed an organizer system for the Hoto Flexi Spin Scrubber (QWQJA08) that can mount to either the wall using #10 screws or pegboard mounting screws for a 1/4" pegboard. Overview The system consists of six discreet components that are…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
My friend make this carabiner to hold his up his weight. That is 110 pounds. Go follow him on thingiverse! https://www.thingiverse.com/thing:6470627
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
I wanted a nice way to display my headcovers but couldn't find one online so I designed these. The clearances are very tight so sanding may be necessary. This model is for hybrids, I also have models for drivers, fairway woods, and…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
This is a hybrid lithophane where the frame requires a color change at 3.0, or one can elect to make the numbers opaque as well so only the clock face glows. Others may want to design a frame for the back to house an LED strip and…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
I 3D scanned the freeform handlebars of my CUBE AMS One44 bike to create a custom lamp mount right in the middle of the handlebar. This model is the result of it. Aditionally needed: 4 heatsets m3 4 bolts m3x25 I printed it in ASA, 4…
Print approx. €4.99–€6.09 excl. taxPreliminary estimate for one variant
This is the baby version of the new flexi axolotl featuring hybrid link system containing classic flexi arms and tail and the new style link body The whole axolotl flexes including his head fins and the tails flexes and pushes together to…
This model is required for the various designs of the Hybrid Coaster. The cars are compatible with the 1:15 scale Hybrid Coaster Track . You can find the assembly instructions in the files. In addition to the 3D printed parts, you will…
This extension is compatible with the 1:15 scale Hybrid Coaster . You can find the assembly instructions in the files. In addition to the 3D printed parts, you will need plastic glue for this model. I also recommend chrome paint for a…
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
These are hybrid prints for the gridfinity system by Zack Freedman, meaning you have a box you print in vasemode, and feets to that, that you have to print normally and then glue to the box. (i used doublesided tape) The User…
Checkout the build on my YouTube Channel for more details on how this gearbox works: WARNING: This is a very advanced 3D printing project and even more so if you chose to make the gearbox full functional. I've provided the .3mf files but…
Gesamtlänge: 985mm Breite der Durchfahrt: 540mm Durchfahrt Höhe: 46mm Diese Teile jeweils 2x Drucken CH_Brücke_1_x2 CH_Brücke_2_x2 CH_Brücke_3_x2 CH_Brücke_4_x2 CH_Brücke_5_x2 CH_Strebe_x2 Diese Teile jeweils 4x Drucken…
The Hybrid Betweener Tired of having to swap betweeners depending on the material you are printing and its ventilation needs? And where do I keep the spare betweeners when they are not in use? This project aims to provide the only…
Currently there are four mods that enable you to build more track variants like the classic figure 8 or putting the track on a second level above the other. NEW! Hybrid_Steep_Curve_4 lifts a standard curve to get a banked turn…
The Black Ram Hand was designed not to be a replacement for current prosthetic hands, but to be an assistive technology tool/platform for allowing someone to design and use their own specific manipulators for individual tasks specific to…
This track is compatible with the 1:15 scale Hybrid Coasters . You can find the assembly instructions in the files. You can find the required number of parts and the colors in which I have printed the respective part in the file notes .…
This track is compatible with the 1:15 scale Hybrid Coasters. You can find the assembly instructions in the files. In addition to the 3D printed parts, you will need round rods with a diameter of 1.5mm and plastic glue for this model. I…
This track is compatible with the 1:15 scale Hybrid Coasters . You can find the assembly instructions in the files. In addition to the 3D printed parts, you will need round rods with a diameter of 1.5mm and plastic glue for this model. I…
Ever find yourself running out of f**ks to give? Now you can 3D print some more. This is the ‘F**k’, a unique fox-duck hybrid creature – hence the name. These small creatures are designed to be printed quickly and without supports. Give a…
This battlecarrier Bismarck version is fully printable and I actually printed it, but I didnt finish the paintjob so I decided to upload just the render. For Scale 1:350 please use the cura scale 0,285% because the model is in 1:1 scale.…
funktioniert schräg gedruckt am besten
This is a modification of this crossbow . Print parts from the original crossbow and combine them with these files. The 3030 profile has to be shortened to 31.5cm (32cm should work too). The needed components from the original model are:…
This extension serves as a themed add-on for the 1:15 scale Hybrid Coaster base model. The provided files include a detailed parts list and step-by-step assembly instructions to guide you through the building process with ease. In…
A printed Pusher so your Stryfe or other compatible Blaster can shoot Half- and Full lenght Darts. Print this flat agianst the Bed. A 0.2 layer height should be suffiecent. 2-3 Walls/Perimeters and 10-20% Infill. I printed mine out of PC…
Print upside down. So that the funnel is at the bottom and the thread is at the top. no supports necessary.
Foam Board hybrid RC plane designed to help teach my grandchildren how to fly (interpret that as strong but it won't bother me if I have to make multiple). It has an under-cambered wing, so it is a slow flyer (which is also good for…
The Mark VI Fin Gripper - Black Ram Hand. This hand was designed to use the The Fin Ray Effect giving the wearer the ability to pick up soft or odd shaped items not able to be grasped by rigid claws or fingers. This can allow you to pick…
This is a single print hinged box that is printed with TPU for the first three layers and PLA for the remaining layers. It works well as a case for wired earbuds or other small items. They fit pretty well in the pockets of my jeans.…
Carrera Hybrid Start Ziel Alle Teile 2x Drucken. Das Start / Ziel Schild wurde mit der MMU gedruckt und hält die oberen Teile zusammen.
3HOME: 3MS Hybrid Official Modular Enclosure Give your 3MS a home! This is the official modular enclosure for the 3MS Modular Multimaterial System . Changelog 01.15.2025 Increased the height BTT MMB Case to fix an issue where the EZ…
Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…
Eine einfache Leitplanke für Carrera Hybrid. Kosten < 15 Cent. Einfach von der Seite auf die Fahrbahn aufstecken. Im Slicer kann man die Leitplanke beliebig beschriften.
--------------------------------------------------------------------------------------------------------- Clock running WLED above. No, you don't need a large printer to make this. It's split into 6 segments. In fact - it should be…
Can be used with one hand. Insert the plug at an elevated angle, then the notch will grip when lowered and lock the plug in place. Simple to print. Needs a small support structure below the notch (inside the holder).
I had a difficult time filling up my new S&B Volcano Hybrid without spilling all over the place. I decided to create a screw on funnel for the filling chamber. I tried to make it look like an original accessory. It's my first design, hope…
Use ABS or something even more durable like PC (polycarbon). The image depicts test print from PET. I have problems to print skewed surface without supports (at the beginning near hot surface). When skewed surface is not anchored well it…
CH_Bodenwelle_x2 2x Drucken Die Strebe wird nicht unbedingt benötigt.
Designed to replace the weak original battery plug covers … :) Material: ASA/ABS
This is a single print hinged box that is printed with TPU for the first three layers and PLA for the remaining layers. It works well with regular playing cards, Pokemon cards, Magic The Gathering cards, and…
Experience the cutting edge of motorsport technology with this 3D printable STL model of the Porsche 919 Hybrid. This Le Mans prototype racer model is perfect for motorsport enthusiasts and fans of endurance racing, showcasing innovative…
Storz & Bickel Volcano Hybrid Dust Cover - Grinder fits on top
This is a small Christmas tree decoration shaped like a tree that could be stood up on it's own or hung on a tree by a string. Originally, this tree was designed to sell at my daughter's school Christmas market to raise funds for her…
Hier eine kürzere Version meiner Carrera Hybrid Brücke
MAN Lion's City Efficient Hybrid.
This spring clip will mod your VKB Gladiator Omni Throttle to a "hybrid throttle" where it will hold position forward but spring return from reverse. Simply screw it into the axis lock screw hole with an axis lock screw and attach the…
Benötigt wird dieses 4zu1 USB Kabel Die 4 USB Stecker müssen verklebt werden.
This version of the cover relies on friction to remain attached to the bike. I believe that over time it will eventually fall off. When it does, I will redesign the cover to have a hole where I can use a wire split ring to retain the…
I am currently testing a new hive concept (for me) called the AŽ (ah-zha) hive which is a Slovenian beehive design invented by Anton Žnideršič and named the Alberti-Žnideršič (AŽ) hive. Žnideršič named his hive after himself and a German…
A friend of mine owns a Toyota Corolla hybrid and was always complaining about the armrest box. (too deep and messy) I designed these three box well shaped according to the non regular shape of the armest box. i suggest to print them in…
Rather than just repurpose VC4 hybrid parts as the 3.2H upgrade did, this mod is purpose designed and optimised for the VC3/3.1 printers. It has: 1. Better motor mounting plates better suited to the VC3/3.1 frame. 2. It has lighter, and…
Mount for Lenovo ThinkPad Hybrid USB-C with USB-A Dock. You can use is for wall or underdesk mounting. There is a cutout for the powerbutton and feet of the docking station., missing is a hole for the lock.
This is an extention to the Hybrid Coaster model by 3D.Printed.Roller.Coasters that contains a modified bench seat with side panels along with prepainted parts for multi material printers that suits the Steel Vengeance theme. Please…
Found this hotend in Aliexpress and bought, but when arrived, how mount in my Stealthburner setup? None info found about this chinese Frankenstein… Learned some CAD and solved my problem.
I've always loved playing Fender guitars but loved the look of a Les Paul body. This guitar gives the best of both with the body having a cutout to fit a standard Fender Squire neck. There are two cylinders cut in the body so either two…
I was inspired by North Indian Bansuri Style Flutes and decided to try my hand at designing my own. This transverse flute features a comfortable mouthpiece and sleek minimalist design. The design was intended to be an E bansuri, but when…
This is a hybrid Voronoi Christmas Angel, designed to sit on top of an artificial Christmas tree or as a standalone ornament. As artificial trees have little stiffness at the top due to their wire frame, I designed this angel to be as…
A fuse box cover with extended height for covering fuse taps. It has storage for spare LP mini fuses. Simply print it and snap it onto your fuse box! No prep or sanding needed. The cover features a bendable latch (compliant mechanism)…
Perfect for decoration or a trophy topper. This high-detail model may not survive being scaled down. Enjoy! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
“Roads? Where we're going, we don't need Roads!” This is my first Hybrid Hueforge, so let me know what do you think about this project. I Used Elegoo PLA and PLA+ from my old printer but you can use different. For the Hueforge, (0mm -…
Introduction This design is loosely based on the Scottish Ilay Glynne sundial, a mechanical standing equinoctial ring dial which utilizes an integrated clock face with hour & minute hands. The Ilay Glynne dial was made around 1715 by…
Compatible side barrier for the Carrera Hybrid track, consisting of four parts: a left end piece, a right end piece, a middle section, and a connector. The middle section can be modularly connected as many times as desired to extend or…
This was just a short and fun project I designed and built for my Dad. While the model is more or less a Ford Model T it is not exact and not to any particular scale. This model is about 150mm long and is designed to fit a track with 36mm…
This STL model is a custom design that combines elements from two excellent Thingiverse models. The base is inspired by the VESA mount from this model by u881013 , and the adjustable arms are adapted from this design by hansj66 . All…
I wanted to throw something cute together. So I decided to merge 2 Axolotls that I remixed previously. Hence the hybrid. I took bits from one and added it to the other. Wasn't easy but I'm happy with how it came out. And of course it's…
A hybrid pusher to fire both half-length darts and full lengths from the same blaster! All other designs i found or bought either were too unreliable or weren't compatible with the OFP anti-jam lid. Credit to Jackskidding for the pusher…
The first thing i did after ordering my Volcano Hybrid was searching for any storage solutions that not only protect the device itself, but also keep all accesories within reach. As the famous “Volcano Case” by Vaporizeit isn't available…
Made for Storz & Bickel Volcano Stock one hybrid filling chamber in this little round safe. Screw cap & logo insert.
Spare wheel mounting plate part for the Toyota Corolla Cross Hybrid Spare Tire Mount Upgrade kit . You can raise or lower the height of the top of the model to better fit your spare tire height. The spare tire height will determine the…
this could be a option to make a upgrade on your MK-I for a more cleaner look. do keep in mind that the rail pattern is not alined. since the rail of the MK-II is different from the MK-I if you don't like that then you could modify it a…
Can be used with one hand. Insert the plug at an elevated angle, then the notch will grip when lowered and lock the plug in place. Simple to print. Needs a small support structure below the notch (inside the holder). A similar 3D printed…
The Carrera Hybrid Transport Box offers a sleek and functional storage solution for Carrera Hybrid cars. Whether at home or on the go, this 3D-printed case protects your car from dust, scratches, and damage while displaying it stylishly.…
This is a direct copy of https://www.thingiverse.com/thing:3062641 by user baloan. The author clearly put a ton of work into this, and hopefully this will help more folks see it. Thanks baloan! -------------- The hybrid Mk2.5 R3 extruder…
Fixed stock version of the remake of my first ever CAD designed blaster: the DC15 “EX” or “experimental” hybrid rifle as seen in the temple march in Revenge of the Sith, this time using my recent DC15A rifle as the basis which hopefully…
I made a rear light holder for the CUBE Reaction Hybrid SL 625
The Holy Trinity Ferrari LaFerrari McLaren P1 Porsche 918
This extension serves as a themed add-on for the 1:15 scale Hybrid Coaster base model by @3DPrintedRollerCoasters As of 5/18/2025, Iron Gwazi is the only RMC coaster I've been on, so I decided to remix this Hybrid Coaster model I found…
TURN ON: Print Tiny walls! I did my best, but it was really time consuming to make it totally solid in the inside... so some walls are tiny depending on the scale you make it in. so check your preview fist in you slicer, Before printing!…
My own custom design dual barrel version of the remake of my first ever CAD designed blaster: the DC15 “EX” or “experimental” hybrid rifle as seen in the temple march in Revenge of the Sith, this time using my recent DC15A rifle as the…
The idea is to implement a tripod feature into a basic GoPro-handle, without compromising the funktionality of the tripod or ergonomics of the handle. Next on my to-do list, is to design add-ons that will enable you to use other items in…
EN: I have used models from Malolo as well as gdrag . Both have advantages and disadvantages. The container from gdrag with the transverse slits is almost twice as fast to print as the one with the vertical slits from Malolo. On the other…
Sorry that the translator have fai;led to convert it to 3mf, so you might need to use fusion 360 to “remake”(adjust size, make some fancy decoration… you name it) it a bit before printing.
A replacement lower for the Rush by shoelesshistorian. It is compatible with both Angled Talons and Nightingale Mags. It also features an ambidextrous and extended push button mag release. Only additional hardware is a M3x12mm socket head…
This is a part-remix of the Prusa CORE One INDX extended bin waste-management system, combining a Handle-Hatch with a Hybrid Filament Bucket . UPDATE 1 - The Handle-Hatch models now have optional M10x3 magnet mounts to secure to the side…
This is my first model I am publishing. It is a docking station holder for the Lenovo Hybrid Dock (40AF). It will be mounted with 4 screws. Have fun!
v2 update: made the emitter openings slightly smaller (from ~3.5mm to ~3.2mm) made the openings at the top completely circular
This is a lovely printable representation of one of my most favorite cars, the Corolla Touring from Japan, with absolutely amazing detail, and a lovely design, this model is a great way to represent the car.
These were designed to be printed with hard plastic or resin, but should also work pretty well in tpu or pteg. Each file is different, unless noted the file is a m4 shaft taking these heatset nuts. The m3 version works for m2.5, just use…
printed in PLA, probably could be printed in TPU as well. Try printing without support.
Carrera Hybrid Mop Adapter – 3D-Druckdatei 🛠 Beschreibung: Diese STL-Datei enthält einen speziell entworfenen Mop-Adapter, der an ein Carrera Hybrid Fahrzeug befestigt werden kann. Damit kann das Fahrzeug beim Fahren gleichzeitig die…
These are miniatures, although the supports detach very cleanly, careful removal is required With a little patience, the results are superb Name: The Storm Scourge (or simply "Scourge") Statistics: * Size: Large * Type: Magical Beast *…
This a pen adapter for the Cricut Maker machine to allow the use of a Pentel Arts Hybrid Technica pen.
3D MODEL DESCRIPTION As a thank you for the community and a sample of our work to get you started! Hopefully, you will consider supporting us with our creations. Please note these are a small size! (Please see included photo of hand size…
