TPU/PLA Hybrid Box - Card Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Pokemon/Magic the Gathering/Playing Card case with a TPU hinge/cover and a PLA shell.
- Rating
- 5 / 5
- Likes
- 87
- Downloads
- 351
- Makes
- 2
- Views
- 2,902
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
This is a single print hinged box that is printed with TPU for the first three layers and PLA for the remaining layers. It works well with regular playing cards, Pokemon cards, Magic The Gathering cards, and baseball/basketball/football/other trading cards. Yugioh cards are apparently smaller than all the other card brands, so they will not fit quite as well, but I could make a box for that if there is a demand for it. There is also an optional TPU strap model that will better ensure the lid stays shut, so cards do not spill out if the case is thrown in a backpack.
Temperatures: ~210C nozzle temp for both filaments, 50C bed temp
Infill: 100% (don't worry, this print is almost all perimeters)
Layer height: 0.2mm
Print speed: I use ~30mm/s for all the TPU layers.
Flow rate: I increase the flow rate from the default 95% up to 105% for the three TPU layers and the first PLA layer
Supports: No
Printing surface: Prusa textured steel sheet
Filaments: PRILINE for the TPU, various brands for the PLA
Check out the other versions of this design:
Square version - https://www.prusaprinters.org/prints/66504-tpupla-hybrid-box-square-version
Circular version - https://www.prusaprinters.org/prints/66554-tpupla-hybrid-box-circular-version
Heart version - https://www.prusaprinters.org/prints/66556-tpupla-hybrid-box-heart-version
You can find more details on my website 3dprintedman.com! I put up a full article dedicated to designing and printing these boxes.