Counting matching models…
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Print approx. €7.18–€8.77 excl. taxPreliminary estimate for one variant
Update There is a bigger version of this box with adjusted tolerances now! (As many comments suggested) You will get the more spacious version if you print every stl with a "+". I'd recommend printing the + version if you intend to double…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Gyomeland M53R, a custom Magic: the Gathering Commander sized deck box. Inspired by the industrial kitchen ranges sold by Garland, this new and improved design features: Improved Oven Door, securing your 100 card Commander deck within.…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
This is my custom deck box, primarily used for 100-card decks in Magic the Gathering. The locking mechanism is a simple latch that snaps into place when closing and can easily be pulled back to open. The hinge is just a piece of filament,…
Print approx. €8.86–€10.83 excl. taxPreliminary estimate for one variant
This is a remix of the Stream Deck Stand which adds/changes the following features: Added more pitch offset (now a 10° pitch) Filled in the bottom, so that the 3D printer can just use infill settings to fill it more efficiently…
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for one variant
The original stand positions the Stream Deck XL at an 50° angle. I needed a steeper one to get rid of ceiling light reflections in the buttons, so i designed a replacement with an 63° angle. You will need 12 5mm x 2mm magnets to snap in…
Print approx. €7.39–€9.04 excl. taxPreliminary estimate for PETGSource material: PET
This Magic the Gathering Case is made to store sleeved cards. It holds a 60+5 cards deck. Some different styles of the Topcases are provided to enable multicolor prints that doesn´t need the usage of a MMU. It still contains a blank Top…
Print approx. €6.86–€8.38 excl. taxPreliminary estimate for one variant
As my first foray into complex 3D design, I created a custom deck box to house my “Gyome, Master Chef” Commander Deck for Magic: The Gathering. Modeled in Fusion 360, based on the Garland M43FTR restaurant-grade range. Features: Main oven…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
After having some other 3d printed deck boxes fail on me after using them for a while, I decided to make one that should hopefully hold up to extensive use. The space for cards is roughly the same as an Ultra Pro Satin Tower, and the…
Print approx. €5.26–€6.43 excl. taxPreliminary estimate for one variant
General I really like the look of the official Steam dock so I tried to get it as close as possible to the original one. The dock used in this build is the 8 port uniAccessories dock. I like this one because it looks very clean, is small,…
Print approx. €5.77–€7.06 excl. taxPreliminary estimate for PETGSource material: PET
A Parametric, Vase-Mode Deck Box! This parametric deck box has been designed to hold a full 100 card MTG commander deck. Some key parameters for you to play with include: Card Width Card Length Deck Thickness Box Wall Thickness Card…
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
Playing Card Case made for double deck. Lid fits quiet well on the base. Inner space is 59x89x18mm. Enough space for various types of playing cards. Files with 19 at the end has inner height 19mm. For printing, I recommend 3 vertical…
Print approx. €5.08–€6.21 excl. taxPreliminary estimate for PETGSource material: PET
Hallo Community Habe hier einen Aschenbecher in verschiedenen Ausführungen. Der Deckel lässt sich drehen, wodurch die Öffnung geschlossen werden kann. Druckeinstellungen: Düse: 0,4mm Schichthöhe: 0,2mm Infill: 15% Stützen/Rand: keine Sind…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
About A box to store the cards from the board game root. Enough space for all cards from all the expansions, with or without card sleeves. Print settings I used a layer height of 0.16mm, no supports required.
Print approx. €6.99–€8.54 excl. taxPreliminary estimate for one variant
Space Port Gun Deck - Stand Alone Add one to your Space Port Today! The megalopolises of the future hold many a promise for the up-stack social elite. But the dirty bottom dwellers survive on with they can steal and take. Violence is a…
Print approx. €5.86–€7.17 excl. taxPreliminary estimate for one variant
This kickstand card holder combo for the Steam Deck allows you to have a low-profile storage for 4 micro-SD cards and enables the Steam Deck to stay standing up on its own using a print in place kickstand. This kickstand card holder is…
Print approx. €11.28–€13.79 excl. taxPreliminary estimate for PETGSource material: PET
I printed some "Trash Bin for Sweeper Car" https://www.printables.com/model/324597-trash-bin-for-sweeper-car-popelnice-pro-cistici-vu). I use them to collect filament poop from changing material, support structures etc. But there is no…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant
Tiefenstop Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Der Inbusschlüssel wird von unten mit einem Magnet gehalten. Tiefenstop→Wolfcraft Filament: Verbatim grau PLA
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Kegelsenker Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Kegelsenker 1: 12.4mm Kegelsenker 2: 16.5mm Wenn der große Kegelsenker kippelt kann unter dem Schaft eine Stütze eingeklebt werden. Filament: Verbatim grau PLA
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
Hakendreher Einsatz für Festool Systainer Sys3 mit Deckelfach. Wird eingeklebt. Ich wollte den Hakendreher von Festool unbedingt im Deckel haben: Damit der in den Deckel passt, muss er leider mit einem Winkelschleifer oben/unten etwas…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
I'm in the process of adding LED canopy lights to my upper deck. Since this is my upper deck, I needed to design holders for electrical conduit pipe that I will string the lights from. I created and printed several models to accomplish…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
A full-sized docking station base made for use with modular accessories. This is 300mm wide for large printers. Most printers cannot print this, unless you divide the dock in prusa slicer. (I don't use it, don't know it) I've kept…
Print approx. €12.10–€14.79 excl. taxPreliminary estimate for one variant
This is a redesigned power slider switch button for the Black & Decker Cordless Leaf Blower (LSW321). My aging mother no longer has the full function of her hands due to arthritis. This presents a problem as she is unable to apply the…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
This 3D printable deck box is designed specifically for Commander (EDH) players who want a durable and practical storage solution for their decks. The model is optimized to hold a full 100-card deck, including sleeved cards, ensuring a…
Print approx. €9.81–€11.99 excl. taxPreliminary estimate for one variant
This is an easy to print and strong deck box that fits 100+ sleeved cards. Made for Magic The Gathering commander decks but these could easily be used for anything else. Print each half in different colours to mix and match designs. The…
Stackable deck boxes for Magic the Gathering, including: Commander deck box with a window to display your decks commander (or another card of your choice. Space for 100 card deck and 25 card side-deck (with sleeves) Standard deck box with…
I made this model, because i couldnt find any deckbox that fits all my needs, and thought id share it with you all. It holds 100+ sealable doublesleeved cards, with a seperate room for tokens, i believe itll hold about 20 sleeved tokens.…
Based on RobotsRUs' MTG Commander Deck Box . This deck box fits 1 deck with a window for the Leader, 50 single sleeved deck cards, and 10 single sleeved Don cards. It probably fits double sleeve too, I don't double sleeve so I haven't…
Step up your game with these visually enhanced deck cases, a creative remix of an existing design loved by TCG players. While the original functionality remains untouched, capable of holding over 100 sleeved cards with ease, it's the…
This is a remix of Gimpel's awesome expanding deck box with an unlocking movement. A slight twist of the top makes the six locking mechanisms slide out and release it. While I was building two of these, I made at least small tweaks to…
The deck box I remixed from is fantastic, but there were a few things I wasn't happy with. I also wanted to be able to fit the life counter inside the box. IMPORTANT: If you want to use magnets in the life counter, you need to set…
It holds 120+ standard-sized double-sleeved trading cards (i.e. Magic the Gathering or Pokemon) and includes dividers and an optional TPU seal. I seized the box based on Dragon Shield sleeves. No support or brimm required. Requires 6…
FEATURES Besides the eye-catching locking mechanism, there are also further features, wich make this deck box unique. There are two storage compartments for small dice or tokens . And the door also acts as command zone . Just slide your…
UPDATE: 1.51 -reduced amount wifi card sticks out (11/25/24) UPDATE: 1.5 Has been released! -The case has been reduced in size and enforced in key areas. -Added external screen controls. -New power button, still goes missing but it's new!…
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀 This is a remix off of ChappIO 's really nice MTG Counters design. The following changes were made: Made the box 1mm overall thinner…
Remix of https://www.thingiverse.com/thing:4240305. Made some edits to it to fit my liking, mainly to get an aligned outer profile and hide the cable on top. Also the front plate is mounted from the back by using M3 inserts (Turmberg3D…
A DIY portable cyberdeck designed to work with any smartphone up to 13 mm thick, the Modular C‑Deck builds on the original Pixel 3 XL NetHunter C‑Deck with a fully modular design. It features a replaceable phone insert , making it easy to…
Also included a taller variant if you want it to go all the way up to the edge of the token box The "special" variant of the insert holds the exact amount of tokens included from GameGenics
Created this deckbox to fit a 100 card sleeved commander deck, as well as 15 unsleeved tokens and a life counter. The walls are definitely thicker than they need to be, but as this was going in a backpack, I wanted to make it sturdy
This is my edition of a "Ultimate Guard 100+" deck box. I used Fusion 360 to build my own version from scratch. This deck box will hold 100 sleeved magic the gathering cards and a few more (such as a hand full of tokens) I have added…
Stackable deck box for Magic the Gathering. Commander deck box with a window to display your decks commander (or another card of your choice. Space for 100 card deck and 25 card side-deck (with sleeves) Dice-tray base that can hold dice,…
This is an easy to print and strong deck box that fits 100+ sleeved cards. Made for Magic The Gathering commander decks but these could easily be used for anything else. Print each half in different colours to mix and match designs. The…
An MTG deck box design inspired by a Pelican case. This deck box will hold 100 double sleeved cards with a little extra space for tokens. There is also a place in the center for dice or other small accessories. Features of this deck box…
An MTG deck box design shaped like a treasure chest. This deck box will hold 100 double sleeved cards with a little extra space for tokens. There is also a space on one side for dice or other small accessories. This box is built with 4…
I measured and recreated an Elgato Stream Deck [5x3] so that I can later use it to design custom mounting solutions to be 3d printed. If you found this useful, please throw it a like. If you notice there are any issues with the model and…
These draw/discard trays keep cards in place. Available in a variety of configurations, such as one, two, three or four bins. (The smoothness of the angles will be largely determined by your layer height resolution.) These were designed…
Just an MTG deck box, simple and easy! Fits 100 double sleeved cards, or 100 sleeved with extra room for tokens. I remixed the original ones from Cults and added a logo, slimmed down the sides and made it easier to pull the toploader. You…
Simple Steam Deck Stand with a slot for a Anker 8 in 1 USB-C hub. I am using a rubber band to hold the USB-C hub in place. Other Anker USB-C hub look might also fit in the slot. My USB hub is 55 mm wide and 15.4 mm thick.
Originally hosted at https://www.thingiverse.com/thing:5754524 by myself. This is a deck box for trading card games. It was designed specifically for the Commander format of Magic the Gathering. It fits 100 cards with a little room for…
A fairly basic MTG Commander deckbox, featuring: A twist-lock top, turning the MTG logo will open the grippers, allowing the lid to be removed. The grippers close automatically thanks to the spring. Nicely fits 100 sleeved MTG cards…
Remixed rugged box for holding Magic the Gathering decks, or loose cards. Tight enough to hold the cards without smashing them or the sleeves, but loose enough to not need to jam the cards in. The hinges use M3x25mm bolts,…
An MTG deck box designed with a latching two-part outer shell that is mechanically linked with gears. This deck box features a removable tray that will hold 100 double sleeved cards with a little extra space for tokens. There is a space…
The platonic ideal of a shipping crate now in miniature and in deck box form. But be warned its contents my be hazardous to your health or maybe just the rest of your playgroup. This deck box will hold 100 double sleeved cards with a…
UPDATE: Added V2 with material removed for less filament use, raised wall height to keep from seeing the color of the last card, and put a slope in bottom of the vertical car holder to keep them tipped back. Inspired by Gloomhaven Battle…
This is my edition of a "Ultimate Guard" deck box. They do not make the ultimate guard deck box in a 60+ version. They only make them for commander decks. So I used Fusion 360 to build my own version from scratch. This deck box will hold…
Version 2 of my Barrel deck box. This new version still holds 100 double sleeved cards with extra space for tokens. To the sides it holds 6, 12mm dice and pen or pencil up to a 105mm. With a new compartment at the bottom for even more…
This box fits 100 double sleeved cards. In addition there are compartments to store tokens and small dice and a command stand. In case you don't need the commander stand, you can also print a version without it (B1 (no commander stand)).…
This is a slim deck box for a double-sleeved Commander deck that fits in a jeans pocket. It has a window for your Commander, which is sleeved in a CardCover Toploader from Ultimate Guard. It also has space for 20 tokens (10 per side). In…
fallout inspired Vault-Tec supply box for magic the gathering commander deck or other card games. This box should fit sleeved deck of little more than 100 card in main area and tokens in side area, Top will fit full set of dice. use 5mm x…
This is remixed from another commander deck box. I like the original model but needed to make some modifications for my purposes. The primary motivation for this remix was adding a larger commander slot to accommodate larger slide card…
A simple deck box, with room for 100 double sleeved cards, and magnetic latching. The key feature though is the quick swappable and customisable badges, allowing the deck boxes to be customised to the game or deck that you are playing.…
This is a simple 3D-printed case I made for my OnePlus 10 Pro . It’s designed to work with the Rii Mini K02+ Bluetooth Keyboard and requires 2x M5 bolts for assembly. Note: I'm still pretty new to 3D modeling, so the topology is a bit…
The new standalone Star War Deckbuilding Game: Clone Wars maintains the quick, satisfying deck building of the original box with minimal changes in rules. As both sets are technically compatible with each other, I wanted to keep them in…
Commander deckbox designed to hold 100 double sleeved cards, with a side compartment for tokens or dice. Features of this deck box include: A securely fitting lid with detent to hold it in place. Interchangeable insert on the front for…
Originally hosted at https://www.thingiverse.com/thing:5215344 by myself. This is a deck box for trading card games. It was designed specifically for the Commander format of Magic the Gathering. It fits 100 cards with a little room for…
This is an improved version of my previous deck box found here https://www.printables.com/model/841827-edh-display-deck-box with rounded corners and edges. I wanted a functional deck box that was able to hold tokens and display a…
Magic the Gathering Flatpack Commander Deck Stand/Holder After printing and using other Commander Deck Holders, I ended up with a wish list of features. Number one on that list was to make it easier to pack, travel with, and store away .…
This Commander deck box is sized for 100 double sleeved cards with some extra space for tokens. It can be assembled with an extra compartment at the bottom for dice and other small accessories. This design is a base for my other deck box…
A universal component for mounting power banks or other accessories using 3M VHB tape or Magsafe Magnetic rings. You can also design Velcro fastening openings based on this component. Download the .STEP file to create your own accessory.
This commander sized deckbox will keep your cards safe in your bag or serve as a standalone box fit for a day at the convention hall. Designed with durability in mind, the main compartment is sized for double sleeved cards and an…
Magnetic latch - requires two 10x2 mm magnets
6x3mm magnets used for lids dragon shield sleeves/ One piece official sleeves tested to fit Ultrapro toploaders tested to fit in Commander/ Leader slot comment if you want different/more designs on lids
Features Magnetic Modularity – Each tray uses 4× 6×3mm magnets (not included) to snap securely together. Build the layout you need—line them up, cluster them, or expand as your game demands. Sleeve-Friendly Fit – Sized to hold sleeved or…
I made one simple box for my Stream Deck MK2 to add it as a buttonbox on my sim rig. 4 pieces of M3x20 is needed for attaching the top to the bottom, selftapping holes in the top. I used the mounting from…
Simple model created in tinkercad for my decks. You can use this box for cube or for storage of your draft decks. Box is not waterproof and gets pretty heavy when full. Lid needs a little bit of sanding, but first check the fit for your…
To see the build video of how I made this design please see my YouTube video added below or visit my channel @froooch I added a dice caddy that can be stored in the box over your deck or be attached to the top of the box during play. The…
I really like the original design, but I have to remove it before put my deck into the carry case which is a bit annoyed. So I refer to the original design and redesigned a carry case compatible version. You would need super glue instead…
Here's a little techdeck park that I made for my sons. Enjoy!
This 3D-printed deck box. It's built to hold over 100 double-sleeved Magic: The Gathering cards, with extra space for tokens. The design includes a smooth-sliding drawer that keeps cards secure, and four powerful N52 magnets ensure it…
Modeled after a whiskey barrel, this deck box can hold 100 double sleeved cards with extra space for tokens. To the sides it holds 6, 12mm dice and up to a 105mm pen or pencil. Check out version 2 here Notes: These parts have a nominal…
Don't let the servants of Chaos hamper your ability to maintain a great looking table space! Yog-Sothoth, when he does awaken, will be enthralled with your amazingly organized draw decks! The totally modular trays can be attached to the…
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
NEW VERSION can be found under Remixes
Here are my changes to the original models: Streamdeck_Mk2_Top: was remixed that a Stream Deck Mk2 fits in there Streamdeck_Base_Open_Bottom: was remixed that holes for USB-cable are at the bottom closer to the mounting holes…
Hello! Thanks for checking out my first published model! This is my first time working on a model/print like this so please feel free to comment with questions, suggestions and requests! Features : Fallout/Atomic era styling Removable…
Abdeckkappe für einen Einhell Akku der Power X-Change Serie. Ich habe ihn für meine 18V / 4Ah Akkus konstruiert. Die Abdeckkappe hat auf der Innenseite bereits zwei Bohrungen mit Senkungen angedeutet. Man kann sie somit auch als…
Zoidberg is a case for the LilyGo T-Deck that has been designed to have the smallest bezels feasibly possible (3mm!) with an internal structure that supports and protects the devices components. It does this while requiring no nuts, bolts…
This deck box is designed to hold 100 sleeved cards as well as 15 sleeved tokens. The front display window is meant to fit a sleeved card without a top loader to display your commander. The lid is designed to securely clip onto the deck…
Print it without any supports by orienting the back side in the printing bed. Printed using an Ender 3 V3 SE with .4mm nozzle, Here is a link of toploaders i bought on Aliexpress. Did you like this project? Consider giving me a tip
For sleeved MTG cards and a deck-size of 100-120 cards.
NO SUPPORTS NEEDED! This little box in PCB style has a screw cap and can be scaled up as you like. Looks good when printed in PCB colors: green and copper. Have fun! Material: PLA Layerheight: 0.2mm Infill: 20%
Here the now long overdue stand alone kickstand that was firstly introduced with the 18650 Powerpack back in April. Even so it was requested back then I totally forgot about it and was reminded just yesterday so I quickly added it to the…
its a really snugfit and a little force was needed for the XL. Considering scaling it 0,x % up.
This clamp is for a StreamDeck (MK.2) to mount it to a 8040 alu-profile on your simrig. Print this part with the big opening down on the printerbed. So you don't need any support and the clamping face will get a good fit. There is only…
Finger board rail for tech decks uses 2 m3x8 screws to attach the feet to the rail would suggest putting some grip tape or anti slip rubber to help hold in place while skating. needs minimum 300mm bed size to fit rail. 3D printing…
![Elgato Stream Deck [5x3] Reference Model](https://media.printables.com/media/prints/117694/images/1147728_39b98eb0-b94d-411a-9fe2-0a8a8ae65f1f/f4c9dcbe-104c-4229-895f-52dfb1229977-2.png)
![Nemesis Modular Item Deck Holder designed for sleeved cards [ Nemesis, Lockdown, Retaliation ]](https://media.printables.com/media/prints/cfbaf411-f925-46d9-8626-2b883d143cde/images/10629845_fbd97aed-af38-4a68-9527-d456ab532607_bdcecc69-7a1c-4f77-b7c2-0ce0e43f6717/img_5203.jpeg)
