1 / 14
Handle-Hatch & Hybrid Filament Bucket for INDX Extended Filament Bin — image 1
1 / 14

Handle-Hatch & Hybrid Filament Bucket for INDX Extended Filament Bin

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed for the CORE One INDX, this helps to improve chamber heat retention while enhancing waste capacity overall.

Rating
4.778 / 5
Likes
62
Downloads
160
Makes
9
Views
1,317
Reviews
9

Updated at source:

Model information

License
Open Community License v1.1

This is a  part-remix of the Prusa CORE One INDX extended bin waste-management system, combining a Handle-Hatch with a Hybrid Filament Bucket.

UPDATE 1 - The Handle-Hatch models now have optional M10x3 magnet mounts to secure to the side plate (screws are still a robust option)

UPDATE 2 - 45° wedge for sliding now included in Print-in-Place Handle-Hatch model/project. My test print was silky smooth with ZERO resistance so please calibrate your printer accordingly or print the non-PiP version.

Note: See file tab comments - Models are noted according, Project Files are also noted as such with settings applied for your convenience. 

Handle-Hatch

The main purpose of the Handle Hatch is to help retain heat inside the CORE One enclosure when printing materials that benefit from a warmer chamber.

The hatch is a sliding door mounted in a printed frame beneath the filament purge opening on the right-hand side of the printer. When printing high-temperature or chamber-sensitive materials, the hatch can be closed during the print and after the purged filament waste can be deposited into the extended below by opening the hatch door. The concept is simple, reducing the large open path through the side panel and helping to retain heat within the enclosure.

For everyday materials such as PLA and PETG, the hatch can simply be left open, allowing purge waste to fall directly into the waste bin below as normal.

Note: The magnet mounted option for the Handle-Hatch is compatible with the Hybrid AND Prusa Original filament buckets. If using the screw mounts, ensure you use my Hybrid Filament Bucket.

Hybrid Filament Bucket

The waste bucket has been redesigned back to the original INDX bucket's larger dimensions rather than using Prusa's extended-capacity (smaller) bucket. This provides a more practical solution while working together with the Handle Hatch.

When printing materials where chamber temperature is important, the hatch can be closed during printing. Once the print is complete, simply open the hatch to allow the accumulated filament waste to drop into the bucket below. This larger hybrid bucket still gives you the ability to collect large amount of filament "poop" waste while keeping the chamber temperature where it needs to be.

The bucket also incorporates two recessed areas on its underside to provide clearance for the heads of the two M3 × 8 mm screws (original mounting option) used to secure the Handle Hatch frame. This allows the bucket to sit correctly without the screw heads interfering with its position. If you opt for the M10x3 magnet mounting option, you can still use this Hybrid bucket, or you can use the original extended bin Prusa bucket.

Print-in-Place vs Assembly [Handle-Hatch]

Two versions of the Handle Hatch are provided.

Option 1: Print-in-Place
The Print-in-Place version uses approximately 0.3 mm clearance between the sliding door and the V-rail within the hatch frame.

The door is therefore printed already captured within the frame and can slide along the V-rail once the printed parts have been separated.

When printed in PETG, the initial separation of the door from the rails should require little to no effort, if not, you need to calibrate your printer./filament Apply a small amount of pressure to release the door free from the surrounding rails, it will slide smoothly. If you printer is calibrated well, the model will actually have a mild rattle once release and cooled of the print plate, as the door from my testing was free to move instantly.

This is the author's preferred version.

Option 2: Assembly
The Assembly version allows the hatch door and frame to be printed as separate pieces.

For this version, a T-rail has been modified on one side to allow the door to be inserted into the frame during assembly. One side of the hatch door is inserted into the T-rail, while the opposite side is positioned on the corresponding rail. Assembly is less putting together, just holding the door in place when installing. Simple!

During installation, take care to keep the door correctly positioned while the frame is secured to the printer.

For the assembly version, supports are essential, preferably using a different support material where available. This helps produce cleaner and smoother T-rail surfaces, allowing the hatch door to operate more freely.

Quick Note on the Assembly Version:

For the assembled version, it is recommended to file or lightly sand the underside edge of the opening in the right-hand metal side panel after drilling.

This ensures that the sliding door does not catch on the underside edge of the metal opening during operation.

The author did not experience this issue with the Print-in-Place version, but it is recommended as a precaution for the Assembly version.

Both versions have been tested by the author and are operating as intended. The Print-in-Place version is the author's preferred option.

Installation

If you are using the magnetic mounting option (M10x3) then you can skip this section altogether.

Screw Install: A modified drilling guide is included with this printed kit.

The guide retains the original drilling locations and dimensions used for the INDX waste outlet and side handle, while adding two additional holes of approximately 3.4 mm diameter for screw clearance.

These two additional holes are used to mount the Handle Hatch frame to the underside of the right-hand side panel using.

You require 2 × M3×8 mm screws for this installation.

The additional holes should be drilled through the right-hand side panel using the supplied guide. The Handle Hatch frame is then secured from top-down with the two M3×8 mm screws. I used 2 that I had left over from either the Core One Kit build or the INDX upgrade kit.

The screw heads locate into the two recessed pockets on the underside of the Hybrid Filament Bucket, preventing them from interfering with the bucket's installation and use. You cannot use the Prusa official Filament Buckets with this installation method. You need to use this models Hybrid Bucket.

Alternative Magnet Install: Use 2x M10x3 magnets. The recess is set to 9.8mm, which might seem tight, because it is. Put the magnet on a flat table, lay the frame over the magnet, line up the hole and press firmly. There is no need for glue but you can add some if you desire, but make it just a drop, as the magnets need to sit flush as they can to the frames surface. This install method was tested and certified OK by the author. You can use the Prusa official Filament Buckets with this installation method if so desired, or still use the Hybrid Bucket included with this print.

Important

Drilling the CORE One side panel produces metal dust and particles. Prusa recommends protecting the surrounding area with tape and using a magnet to collect metal particles during the drilling process. Their original installation also uses a 32 mm step drill for the main waste outlet opening.

After installation, follow the original Prusa INDX instructions for the nozzle-cleaner assembly and waste-bin installation pre-calibration,

Recommended Materials

Prusa's original CORE One INDX extended waste-bin instructions recommend:

  • High-volume waste bucket: PCCF

  • Drilling guide: No specific material is specified by Prusa

  • (Large outer bin: PETG)

  • (Three support legs: PETG, with three legs required)

  • And for the Handle-Hatch MOD I recommend the same that Prusa recommended for the handle, PETG.

Prusa also specifies that the extended large waste bin should be printed using the supplied preset, which uses vase mode.

This remix is intended for the Prusa CORE One with INDX and is designed to work alongside the original Prusa INDX waste-management concept.

Prusa article to original extended bin model: https://help.prusa3d.com/article/install-larger-bucket-on-prusa-core-one-indx_1147539

Grogg-3D

Tags