Counting matching models…
15 cm Long Crevice Tool - 1.5 cm Diameter (Nozzle) Designed for precision cleaning in tight spaces. Ideal for reaching narrow gaps and hard-to-access areas, it is perfect for tasks like car detailing. The outer diameter of the adapter is…
Parts List Inventory of all parts needed for a full, mounted set of 12 wheels: Printed Parts Thumb Wheel (12) Separator (6) Assembly Wrench (2) End Cap (2) Stand Bracket (2) for each wheel x (A, B, C, D, E, F, G, H, I, K, L, M): Wheel x…
Passt beim Dyson-Staubsauger. Fits to Dyson-vacs. Material: PLA Druckereinstellung: Layerhöhe 0,2 mm / Infill 10 % / Support No Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein Like…
layer height 0.2. used 5 walls , just use as many as you would like Its a small piece so wont take much time so better make it robust. Material Used - PETG, or any you would like . like PLA Tolerance - 0.25 Supported PTFE Tube - 4mm OD…
I made this so i can easily route two spools filament from my Creality Space Pi Plus to my Creality K1 max. Layer height 0.2. used 5 walls , just use as many as you would like Its a small piece so wont take much time so better make it…
Passt beim Vorwerk-Staubsauger. Fits to Vorwerk-vacs. Material: PLA Druckereinstellung: Layerhöhe 0,2 mm / Infill 20 % / Support No Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein Like…
Simple Attachment Adapter for the original Bosch Unlimited Wall / Charging Mount.
Samsung galaxy a13 case with attachments clip. i currently have only one attachment made wich is a 2 card holder but there will be lots more coming soon
Key cover / holder, 6mm wide and 2mm thick. Osłona / zamocowanie klucza o szerokości 6mm i grubości 2mm
Designed this adapter model to provide a snug fit against the router base, as well as allow adequate room for the latch to move once the adapter is attached to the base. Two models are provided: Generic connection to a dust collection…
I created this set of color coding attachments for analog audio over lan cable units like Thomanns Cat Snake or Pronomics NetCore system (these both units are identical in mechanical and electrical perspective). The plate covering the…
These are the 3d printable parts necessary to help you motorize your 20lb sausage mixer. The tutorial and complete parts list can be found on YouTube here:
I needed an attachment for my a Milwaukee job site table saw dust collector to funnel down to my 4 gallon Ridgid vacuum. The vacuum hose on the 4gallon Rigid is smaller than regular Ridgid shop vacs.
Created to take up less space and be more efficient. Can hold 1lbs or .5kg comfortably. Cutting board measurements are in centimeters. Print Settings: Wall Count: 2 Infill Density: 50% Printing Speed: 60mm/s ( HIGHLY RECOMMENDED for bed…
Now you can easily see the value of your planets when you get attachments. You need to keep you planet cards vertical, I'm using super cheap business card holders from amazon. There is an indent for a 10x1mm magnet to hold these together.…
This is a specially designed aeroplane for attaching a spoon or fork or knife at the end of it. Makes for a great simple print for your kids (or yourselves if you're avgeek enough!). This does require a customised hole to be made on the…
This small model will make your benchy look much cooler in less than 20min of printing time! Please make sure to check out my other benchy attachments as well!😊
Parts List : PTFE tube (stretch the PTFE before hand) 1 M3 screw for ptfe approx 20mm (stretch the PTFE before hand) 2x m3 screw approx 10mm for attaching to the printer 3x m3 nut Tape IMPORTANT: The STL file is slightly modified for…
I liked the model but wanted the two sides to look (nearly) identical. So, I made this.
Seeed Studio Sensecap T1000-E charging cradle/puck with magnet attachment
The elements allow you to attach guy lines to a light antenna mast. The ability to rotate the mast has been retained. The model is adapted to a foldable "flag" mast with a diameter of 51 mm. I printed with Pet G, 25% infill. Elementy…
hand attachment for my sprunki models .ONLY MY MODEL
These are my 2 versions of the Nerf Rival Takedown Grip by haphazardlynamed ( https://www.thingiverse.com/thing:4418085 ). One version has only the grip, while the other version includes a stock attachment point that is compatible with…
Use an M4 screw to set the correct clearance for the pen.
An easy to print Hoto vacuum holder attachment so that everything in your drawer or wherever you place this is nicely organised and nothing is rolling about.
An unusual chip extraction attachment - screwed underneath, to the foot, for edge work. Typical top extraction (i.e. between the milling machine and the foot, pulling the chips upwards) do not remove the spoil well when working with a…
Universal Clipper Attachment Combs – Compatible with A5 and A6 Blades (Oster 10, 25, 30) Compatibility: Designed for blades measuring between 48 mm and 49.5 mm in width and 2.5 mm to 3.5 mm in thickness Compatible with A5 and A6-style…
Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…
The part that is built into the armrest of my 2006 Chevy Silverado 2500HD Duramax broke. Without it, the door panel pulls away from the door when closing it. It's a very simple design but it seemed to work. I just epoxied the s*!t out of…
Made it a close enough fit to not need magnets (about .001" press fit). Also added the multiplier cause I'm not going to remember that. offset center of v slightly to align with little nub on caliper. To use just multiply caliper reading…
Holder for 55mm lens caps with convenient attachment hole.
Universal magnetic attachment adapted to the side panel of virtually any metal sewing machine. It allows you to free up your sewing table and have all the bobbins and small tools (screwdriver needles, clips, etc.) at your fingertips.…
The print comes in many parts that will need to be clipped together. Print settings - (Bambu P1S) Material - Body needs to be PETG because the center section should allow for some flexibilty. PLA wears too quickly. The button extenders…
Remixed a very well made can holder design, just a little so that it would attach to the Rovic brand golf cart. Clips on perfectly to the existing cup holder attachment “nub” thing on the cart. Doubled the wall thickness so it hopefully…
A replacement attachment for the Flowbee haircutting system. Print in PETG. No supports needed.
I made an attachment for my shaving brush that friction fits onto the Philips Series 7000 shaver cleaning station. The mount only model is there in case your shaving brush doesn't fit into the slot that mine does.
Preface There are good HSW OpenSCAD customizers out there as well as libraries to generate attachments, some I collected in this collection . What I found lacking was the ability to generate attachments on a grid and the ability to…
a monitor mount for the rk1 sim rig needs M12 2PCS, 70mm https://ar.aliexpress.com/item/1005008081039320.html?spm=a2g0o.order_detail.order_detail_item.7.74e0f19c8F03Pa&gatewayAdapt=glo2ara
This is a two-part, 3D-printable desiccant holder for insertion into the core of a filament spool. Parametric designs are available @ OnShape The lower section is a cylindrical basket with an outer diameter of 50 mm and 59mm height…
Ender 3 Briss fang Gen2 - Plotter AttachmentEnder 3 Briss fang Gen2 - Plotter Attachment A pen holder designed to slot into one of the side rails of the Briss Fang (Gen 2) for an Ender 3A pen holder designed to slot into one of the side…
A stair climbing attachment for the Workzone type 27839 foldable hand truck from Aldi / Hofer. It allows you to slide heavy goods up and down the stairs relatively easily, without “crashing” the hand truck on each step. The climbing…
Besure to get a joy-con wrist-strap for the actual attachment!!! It's actually very cheap so i'm sure you'll be able to get one After all that just screw it in the attachment
THE NEWEST BCAR I POSTED CAN BE PRINTED WITHOUT SUPPORT. IT LOOKS BETTER AND IS EASIER TO PRINT. The BCAR is set at 10 degrees with progressive crush. Not sure if anyone has done that before so please give me feedback on its performance…
This model is designed to be used as an assistive device. It is intended to help with the ease of use of a leaf blower for those who might utilize a prosthetic arm. The attachment is comprised of 2 main parts: 1 that is installed onto the…
These models by themselves are nothing. These models are tools for you to use to create new spool attachments for your Qidi Plus 4. There are 3 models. (stl and f3d files provided for each) One is a male stub which is simple, just print…
This model adapts the Vernier Dual-Force Sensor (DFS-BTA) into a functional force plate. I made this originally for an adapted egg-drop experiment to measure impact forces from dropped objects, but it can also be used for simple weighing…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Sling attachment only: 1. Remove rear stock (yellow rubberized cheek portion). 2.…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper • N-Strike attachment point for compatibility of a wide range of nerf stocks. •…
I was looking for an attachment that could help eliminate voids when filling 3D prints with concrete. I cloned the mechanism of Hitachis implementation of this tool from photos found online. Required hardware 4 x DIN 934 M3 Nut 4 x DIN…
I made this model very quickly to be able to attach my camera to my monitor's stand. Next to the 3D-printed part I used the top of a cheap lighting stand that broke, which is to be inserted into the tube at the top. You can then put a…
Updated model with wider grips for the quiver and screw holes that match the cable guard.
This is a simple click-link trimmer attachment tool hanger. The tool clicks into the hanger then the hanger can be used to hang the attachment. I’ve tested this on the Craftsman / Ryobi click link tools.
this model should be printed on its side so that the box opening in on the left or right you must still use springs, but in a pinch you can use discarded pen springs instead of the original ones to use: disconnect the hose from the…
A simple yet clean solution to store the multiple attachments you can use with a Dyson vacuum. Works for the small attachments up to the large mopping ones. Attaches to the wall with 2 screws. This mount allows you to snap in the…
**WARNING**: THIS IS VERY SHARP AT THE FRONT OF THE BARREL. KEEP ALL SENSITIVE BODY PARTS AWAY FROM IT. **NOTE** THIS IS FOR THE 12 BCAR VARIANT OF THE ZNC AUS. YOU WILL ALSO HAVE TO PAINT IT.(unless you have ams and set a color change)…
I couldn't find a low profile exhaust attachment for the CoreOne as I wanted to have it turn off to the side as soon as possible. So I made my own. The outer diameter of the circle is actually 102mm as that was a better match for the tube…
Shelf attachment for 1/2" dowel. It fits tight!! Each one I've made is a tight first fit... made a snap noise like the project broke. Idea came from How I printed: 4 walls, 30% infill. They're holding just fine for me. I figured if we are…
This is a vented threaded oil funnel for Toyota threads (37x3). I have designed a funnel, a cap, a regular funnel style attachment. I can confirm it works with the 2020 Toyota Tundra. I have made this out of PETG and ABS. Updated Model -…
I found many bin attachments online, some that curve around the machine and others that are free standing. What I wanted was a permanently mounted stand with a bin that sits securely in place, stays close to the machine to save space and…
Print with tree supports. The mount for the attachments is brittle, and blade may pull apart once broken free, just slide it back together.
the other single mini bit remix had bad threads, i fixed it and also rounded off the edges to make it look a bit nicer
this is a remake of a attachment for the sub that you can inflate with the hikoki airgun. feel free to upgrade my file
Desk clamp able to support my line of modular attachments. Look on my page for the free attachments available! The clamp was tested with a cup holder with my wife's large water bottle full of water but strength will depend on printer…
Multifunctional Arm Attachment – TP-Link Tapo Camera Mount This attachment is designed for mounting a TP-Link Tapo C200/C210/C220/C230 camera to the Multifunctional Arm system. It provides a secure and stable connection using the standard…
Henry attachment I made for getting into the small spaces in my car. Printed in PETG as PLA just wares away too quick. Printed standing upright with no supports, I did add a brim. Enjoy.
KitchenAid Stand Mixer attachment hanger, remixed to have hexagons on the base to stop the posts spinning.
You can solder one end of a wire to 6mm nickel strip, attach alligator clips or ring terminals to the other end, and feed the the nickel strip through the ends of the print . Now you can (carefully) use your Opus, Liitokala, or other…
Replacement for the 'clip part' of the 8bitdo smartphone clip that attaches to a Black Shark Cooler 5 Pro. Enable supports, I suggest printing in the orientation the .stl file is saved in to improve "structural integrity".
my mother's skeleton broke in the last big storm we had. after seeing the damage i got to work designing this. it is big than the original to keep the base strong and screw not as dug in to allow them to pop off easier. this design having…
Attaches to your Xbox One controller to act as a steering wheel
A cap for the end of an Olight S1R BATON II with a loop for attaching to a keychain. There are slots for four 5mm neodymium magnets.A cap for the end of an Olight S1R BATON II with a loop for attaching to a keychain. (should be able to…
I like to play paintball playground in VR but did not want to pay for an attachment to screw my tank onto my VR controller so I made a model to 3d print one. I tried to make it as close to the original quest 3 controller body as I could.…
i made this tank for my other model that slips on your VR controller. Disclaimer I have not printed this yet but the tolerance is designed for 0.1mm so it should all fit together well. the reg on the tank is a model of the powerhouse hook…
made this for my other model that slips-on to your vr controller. disclaimer this has not been printed but it has 0.1 tolerance and i have included a .step file so you may edit the tolerance to your 3d printer in cad software. the reg on…
This attachment was made to fit onto a shop vacuum and get into hard-to-reach spaces. The measurements are in USCS. The files ID is 1.49 inches. make sure that you scale the model to fit your specific shop vacuum. I printed this in black…
This attachment is modified to fit the pegboard on my Harbor Freight Yukon workbench which is a bit over 1/8" thick.
Decorative PokéBall designed to be mounted on a car rear wiper using zip ties. The model includes integrated holes for secure zip-tie attachment, allowing easy installation without permanent modification to the vehicle. The PokéBall is…
attachment to measure the distance from the center of a hole easier. diameter of a cone - 12mm
Print face-down. You can get the spacer from the original upload.
Go-pro attachment to mate with standard base accessories that can be blended to existing or new print models.
This is an attachment that allows you to use the Dyson combination tool with the Rigid 18v hand vacuum.I know this is a very specific tool, but I always try to share things I make because you never know if someone else has the same…
3d printed Biqu B1 carriage that connects the pcb to the hot end assemble in 1 part.
Tired of slipping on ice? These simple 3D-printed spikes attach to your shoes with rubber bands for reliable traction on snow and ice. Proven durable after a week of daily use. Easy to install, only about 6 long rubberbands needed! There…
Hey all, this is my first model so feel free to leave suggestions! This is a lug nut holder that uses double sided tape to attach to a pit crew helmet. Very useful for tire changers. Uses four 3x1 magnets to hold lug nut secure. Material:…
This extension attachment connects to the spout of your watering can to help you reach deep pots, tight spaces, and plants that are otherwise difficult to water. It fits watering can spouts between 19 and 21 mm in diameter, providing…
This model is compatible with the lego system.
Clean your radiators 3x faster with this custom-designed vacuum attachment. Cleaning the inside of European-style panel radiators is notoriously difficult. Standard vacuum tools are often too thick to fit between the fins, leaving dust to…
Integrating Sphere Attachment (ISA). For measurements on integrating spheres with an opening of 70 mm. These ISAs were used on a Labsphere LMS-100 and utilize hollow sample holder geometry for reducing backscatter of photons into the…
After printing the originals "unmeshed" the model and created a Heart Shaped tray, tested and works fine
A parallel arm with a heat press insert and thread tapping attachment. Maintains a right angle during installation. BOM Here Extrusion: 2020 x 150-200mm long (we used 155mm). Hole Pattern of Faceplate is two Rectangles, 30 x 60, and 20 x…
This is a Vesa Plate that allows you to install two Magic Arms to the back of your monitor for mounting webcam or mic. You could hypothetically add whatever you wanted but I chose these two things. Their are two holes for a 1/4-20 heat…
Print on the nut side for best thread precision. PrusaSlicer project file available, with support blockers for the thread.
Pro tisk jsem použil PETG a vnitřní výplň jsem nastavil 50% a quarter cubic . Vyzkoušeno v praxi a je zcela funkční.
![Dremel 30° router attachment [REMIX]](https://media.printables.com/media/prints/19917a28-81f1-4d59-82f6-0f265e7a9b53/images/12041471_c348200f-d3ea-4feb-bed9-38bbd857d461_1a3c6d21-bec3-437b-8fd5-75e1c9a9232a/dremel.jpg)
