1 / 4
3/4‐10 (¾-10) mount fits Robust/OneWay/Savanah lathe attachments for Live/Drive Centers — image 1
1 / 4

3/4‐10 (¾-10) mount fits Robust/OneWay/Savanah lathe attachments for Live/Drive Centers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.70 – €0.85 net (excluding VAT)

For file: 0.75-10_0.1mm_PETG_MK3S_1h4m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.77 excluding VAT (range midpoint).

Weight reported by the author
4 g
Print time reported by the author
1.06 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Minimal mount for Robust, OneWay, Savanah, etc. live/drive center attachments like a chuck adaptor and bowl ring.

Rating
0 / 5
Likes
1
Downloads
24
Makes
0
Views
201
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Minimal through-bolted mount I designed for my Robust live center and ring drive center attachments… https://www.turnrobust.com/product/live Also fits similar ¾-10 centers by OneWay, Savanah, etc.

The weight is on the through-bolt or wood screw, so there is no chance of a layer separation dropping your gear on the floor. The extra nail hole is just an inexpensive way to keep it from spinning.

Note: Depending on the filament (I used PETG), this may come out just a bit too snug, but you have a lathe; cleaning up the threads takes about 60s. I used a square carbide scraper at 45°.

Designed in Fusion 360, threads ANSI Unified 3/4-10.

Tags