1 / 4
3/4‐10 (¾-10) mount fits Robust/OneWay/Savanah lathe attachments for Live/Drive Centers — zdjęcie 1
1 / 4

3/4‐10 (¾-10) mount fits Robust/OneWay/Savanah lathe attachments for Live/Drive Centers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Minimal mount for Robust, OneWay, Savanah, etc. live/drive center attachments like a chuck adaptor and bowl ring.

Ocena
0 / 5
Polubienia
1
Pobrania
24
Wydruki
0
Wyświetlenia
201
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Minimal through-bolted mount I designed for my Robust live center and ring drive center attachments… https://www.turnrobust.com/product/live Also fits similar ¾-10 centers by OneWay, Savanah, etc.

The weight is on the through-bolt or wood screw, so there is no chance of a layer separation dropping your gear on the floor. The extra nail hole is just an inexpensive way to keep it from spinning.

Note: Depending on the filament (I used PETG), this may come out just a bit too snug, but you have a lathe; cleaning up the threads takes about 60s. I used a square carbide scraper at 45°.

Designed in Fusion 360, threads ANSI Unified 3/4-10.

Tagi