Ploopy Nano BTU Mod with ZSA Moonlander Right Thumb Cluster Attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed @nov1n_300696 ML thumb cluster with this BTU mod on github: https://github.com/gbrnt/ploopy-nano/tree/mas
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 33
- Makes
- 0
- Views
- 1,867
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
I am a very novice CAD user, so the STL has a lot of flaws - not smooth edges, lacking symmetry, etc.
I really wanted to mount a trackball to my ZSA Moonlander, particularly for my right thumb. I took a BTU mod of the top part of the Ploopy Nano (BTUs make the trackball roll soo smooth), and attached the remix of a previously made thumb cluster blank.
I angled the top so that 1) it was a little closer to where my thumb naturally sits and 2) so that the nano sensor was oriented a horizontal/vertical axis (so that I didn't have to scroll diagonally with the trackball to go up/down/right/left).
If using this attachment, I recommend reflashing the ploopy nano sensor with a keymap that has #define POINTING_DEVICE_ROTATION_270 removed from the config.h file; the default configuration, with the rotation I introduced, makes it sideways.
Note to improve the stability of the mount on the ML, I used heat-set inserts. That is why I changed the dimensions of the holes to be beyond the M3 screw diameter.
