Counting matching models…
This is a remix of the Ploopy Pick-and-Place Feeder that has been modified to work with the Lumen PnP, along with several improvements to the basic mechanisms to improve reliability. Added a mounting bracket for installation on the Lumen…
My tiny hands struggle to reach the furthest 3 buttons from my natural resting position on the ploopy. To solve this I created 3 raised buttons that are 3d-printable to be glued on top of the original ploopy case to raise the buttons into…
3/20/2024 NOTE: it has been brought up that the (legacy) .3mf file does not import geometry correctly into PrusaSlicer or Cura - I saved it using OrcaSlicer, so if you use that it should work like normal. I apologize for the…
This model uses the Electronic components and the lens from a Ploopy Nano, and replaces the the bearings with BTUs and the Snooker ball with a Pool ball. Basically, it isn't a Nano anymore. Hardware needed: Ploopy Nano pcb and lense 3…
Wanted a much less severe angle to match my keyboards better.
I didn't like the added height that slapping a wedge to the bottom of it adds. So imported the original files into fusion 360, extended the bottom, and then sliced it off at a 10 degree angle. I printed it on a Bambu Lab A1 using the…
I made some button extensions for the Ploopy Adept so that the buttons would sit under my fingers when my hand was in a neutral position. The upper buttons have been swept around the centre of the ball and then cut in a concave spherical…
I found ball-transfer-units (BTUs) provide a smoother mousing experience. Inspired by bomtarnes . Details about the BTUs I used for this model: R053010810 Bosch Rexroth Ball Transfer Unit US Store:…
Ploopy adept bottom with handwrest
This model is necessary for 3D printing a transparent resin shell for the Ploopy Thumb trackball, as seen in my YouTube video . The increased bridge thickness on the buttons reduce the likelihood of print failing. All the other files were…
Here are two simple button caps for the Ploopy Adept trackball. I just wanted to be able to physically locate the left-click and right-click buttons with my thumb and little finger without looking. Included is my V1 and V2 versions of the…
This is a mash-up of a Ploopy Nano BTU mod and a CRKBD (original on Thingiverse: https://www.thingiverse.com/thing:4549765) At the center is the Nano and then off to either side are the Corne halves. This setup basically removes the…
These ready to print drop-in inserts will help you convert your Ploopy Rev. D from using the standard roller dowel style bearings to 2-mm ceramic G5-grade bearings. It may work on earlier revisions of the Ploopy, but this is not the STEP…
I do not own a Ploopy Nano myself so I was unable to test this. One person has successfully printed this model and it seems to work. See comments for more details. Print at your own risk.
Ploopy's Github has multiple versions of the scroll wheel across the STEP and STL files. I struggled finding the most current version, but now I have gathered all three parts and posted them here. As of 02-Jan-2023, these three files are…
Update 2025/03/16 V3: After use looks like 2 magnets are good if positioned closer to the wheel so updated the carriage. Update 2025/03/08 V2: Updated for 1/16 magnets (N52). The magnets are set to push each other so the wheel wants to…
The tail end of this model is 170% the length of the original model. In total, it adds about 4cm of extra space for your palm to rest. It's not pretty, but it feels way better for my hand. The parts are backwards compatible so, you could…
I made this small little riser so that when I tented my keyboard, I could also lift up my ploopy nano to match the keyboard height (2 inches in this case). I used books/notebooks but they took up space where I wanted my keyboard and the…
I am a very novice CAD user, so the STL has a lot of flaws - not smooth edges, lacking symmetry, etc. I really wanted to mount a trackball to my ZSA Moonlander, particularly for my right thumb. I took a BTU mod of the top part of the…
An angled palm rest for the ploopy adept to compliment this mod https://printables.com/model/799504-ploopy-adept-wedge The cut-out in the middle is approx approx 81 x 76 x 4mm, you can cut out eva foam or a gel pad to insert into it.
The Ploopy Nano is a great little trackball that's just a trackball. No mouse buttons! There are, however, contacts on the PCB to put the trackball into bootloader mode (by shorting them with a paperclip), and these can be used to add a…
Fair warning. I've used TinkerCAD because I lack proficiency in other, better/professional solutions. After purchasing the Ploopy Thumb Trackball, I knew I would be immediately adding the Rexroth BTU mod as well as adding a steel…
Ploopy Nano + BDN9 (I don't have a BDN9) Macro pad dimension area: Nano_BDN9.stl - 73.5mm x 73.5mm x 15mm Nano_BDN9_v2.stl - 74.1mm x 74.1mm x 15mm Ploopy Nano + YMD09 QMK Nano_YMD09 - 10.4 degrees of tilt, no access to reset port…
Relies on the original Kensington Expert bracket, this slots into that bracket and the two notches on the ploopy adept. Can be printed with no supports (it just has two small straight overhangs). Increase walls to 4 or 5 for some strength.
What This driver cap can increase volume your Ploopy Headphones output. There are several variations, but all now utilize aligned magnet holders, moved 1.6-1.7mm closer to the driver. How To fit it in, you will need to cut off some…
I love the Ploopy Trackball but needed more of an angle for my wrist so I made the Ploopy Wedge. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .20 Infill: 15-35 Notes: I went with 35% infill to…
I had trouble getting the main “left mouse button” to click. It seems like there was a lack of clearance on the parts I printed between the main buttons and the wheel mount. This model gives an extra 2mm of space to the two faces closest…
Hi Everyone. As I believe that the Adept trackball is the best you can get, I bought another to use for work. Transporting it in my laptop bag concerned me as the bag gets thrown around a fair bit so I’ve designed a case for the main body…
The thumb rest of the Ploopy Mouse felt really uncomfortable to me and most importantly made it hard to lift the mouse. I tried removing it from the model; I couldn't do it so I took to fiverr and paid somebody to do it for me. They did…
Recently got my Ploopy Knob using it in the scoll, the smooth surfaced moved under my finger a bit too easily. Created a finger groove and some knurling around the end for a bit more of a “grippier” spin. This is the top only. No…
You will need the Ploopy Knob since you will need the base already, this is only the top part of it. Print with default supports, with basically default bambu settings. Only add brim the finger groove divet thing. How to assemble you will…
Fair warning. I've used TinkerCAD because I lack proficiency in other, better/professional solutions. After purchasing the Ploopy Classic Trackball, I immediately downloaded and printed the BTU mod as well as adding a steel trackball for…
Just a bunch of different knobs for the A+
The left-hand version of the Ploopy Adept tent wedge: https://www.printables.com/model/799504-ploopy-adept-wedge It is a mirror of the original model by flipping the left and right side, made for left-hand use.
Simpel raiser block for a Ploopy Nano track ball. Ergonomically shaped to avoid sharp edges in the palm of your hands. The original case fits right in! Raises the Nano with 4.5 cm.
Ploopy Nano 2 Big Button BTU mod of the original Nano 2 case. Top and bottom shell modified to accommodate Bosch Rexroth R053010810 BTUs and larger button. The BTU placement has been designed for a 40mm ball, but it works with the stock…
The Ploopy A+ is a great trackball, but by default the scroll knobs are at the bottom, requiring you to tuck your thumb under your hand to use them. Or to move your hand entirely. Both are uncomfortable, in my opinion. This base rotates…
Mod to replace the roller bearings with BTUs on the Ploopy Classic 2. The compatible BTUs are the BOSCH Rexroth R053010810 KU-B8-OFK (available on keycapsss.com if you're in the EU) or, alternatively, the CY-8H from Aliexpress . You can…
This is a mechanism to turn the Ploopy trackpad into a clickpad. The design is heavily inspired by the Apple iPad Pro keyboard's trackpad mechanism and can be clicked anywhere on its surface, unlike many laptop clickpads. Even though it…
This case allow you to tripod mount your Ploopy Adept or in various positions on the edge of thinner desks. Inspired by Ben Vallack's video: The Perfect Tenting Solution for Split Keyboards . Hardware 1/4“-20x6.4 Brass Heat Set Inserts
This is a simple headphone holder that I made for my pair of Ploopy Heaphones. I designed it for Spax 4x20 wood screws but should work with anything that fits the hole. If you want to modify the model, you can either use the .step-file or…
this tent works with the btu short mod brom br3chtel: https://github.com/Br3chtel/PloopyThumb-SizeAndBTU
Raised caps for the top row of the Ploopy A+, remixed from @Karl_run 's Adept version . The Adept caps are close on the A+ but the button outlines are different, so these are rebuilt rather than edited from the original mesh. The outlines…
An adapter shim for fitting size 7.5 Veichu BTUs (~9mm wide) as used by the original Ploopy Adept BTU mod into the Anyball mod , which expects size 8 Rexroth BTUs (~12mm wide). Created because we migrated from the BTU mod to the Anyball…
A case mod and a separate dock for the Ploopy Adept trackball to be used on a typical flight or driving sim rig. The models assume a 40xx series extruded aluminum profile as the basis for the rig structure. Provided holes accommodate up…
These ready to print drop-in inserts will help you convert your Ploopy Rev. D from using the standard roller dowel style bearings to 2-mm ceramic G5-grade bearings. It may work on earlier revisions of the Ploopy, but this is not the STEP…
