Ploopy Knob Upgraded Jog Wheel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated jog wheel type head for recently released the ploopy knob.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
You will need the Ploopy Knob since you will need the base already, this is only the top part of it.
Print with default supports, with basically default bambu settings. Only add brim the finger groove divet thing.
How to assemble
- you will need everything listed in the bill of materials
- Put the 15x10x4mm bearing on the “knobFingerGrooveHolder”, it should fit very snug. (Don't push too hard it might break)
- Fit “knobFingerGroove” over the bearing from step 2
- Push the whole finger island base first into the circular indent in the knobMain
- Flip it over and place two 6x2mm magnets in the center hole facing each other
- While here place the 6705ZZ Bearing into the 3 hooks on the bottom
- Insert the assembled head into the knob body
- you are done!
BOM
Parts for the finger island
- 1x 15x10x4mm 02138 Bearing
Parts needed for the knob to work
- 2x 6x2mm Magnets
- 1x 6705ZZ Bearing
Why I made it
When I got the ploopy knob I didn't like the head that much, because after a bit it would feel like sandpaper under my finger. So I wanted to add a finger island to my ploopy spinner. Also I wanted it to have some knurling. Also I used that particular bearing because I had it laying around the workshop.
If there is anything you want me to update or fix let me know