Counting matching models…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
Just the bolts not the actual box for the camera.
[Updated 2026-02-02: released additional part: “1-7 pie", a requested missing fraction for the set, description updated.] Notes: A compact version was made that can carry all the pie pieces in one container here:…
Assembly Video : https://youtu.be/a_FZUZAboug Accesory Pack for A.D.A.M 01 and E.V.A 01 : https://www.thingiverse.com/thing:6763700 This is a redesign of my previous model E.V.A that I created. It has been downscaled to 1/10 scale or 17cm…
6 round mag tested with over 300 rounds. 0 feed issues. 10 round mag feeds well in testing so far. (150 rounds tested) Printed with auto tree supports hotplate only. prusament PLA 0.16 layer hight 0.2 first layer 70% infill 4 walls spring…
Remixed DJI Action 4 lens cap with an "anti-scratch gap" between the lens and cover.
Add these decorative traction boards to your Traxxas TRX4 rig for some instant credibility. Look great printed in orange, but could be really cool in red too.
My best iteration yet. The connections pop into place and have a firm connection, no accidental disconnects from swiveling like in my early figures. Joint movement is smooth like butter, (if only somewhat tough in a few areas) and will…
A quick little design i whipped up for fun, wanted to see how well it would work when printed. A modification on my Pin Joint 3.0 Design. Same settings as before, printed solid with tree supports and such. Included also is the boolean…
This holder/adapter is designed to provide a secure and versatile way to mount your DJI Mic 2 to a wide range of action cam accessories, including the DJI selfie stick. The model can be printed as oriented for best stability. Supports…
The Great King of Evil himself! Articulated, stands 19 cm tall, scales well with other figures. The design is a blend of various Hyrule Warriors models. Energy ball NOT included. If the arm joint becomes loose from swinging the sword,…
My sprinklers were all very overgrown with grass so I made a 3" hole saw to help clear out the area. You put a 1/4-20 bolt in the center and use a nut to hold it in place. It does a good job of breaking up hard dirt and grass around the…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
Below the file name contains the quantity EX: x2 or x4 This is my first action figure . I have spent a lot of time modeling and tweaking this and i am still not finished. This model is still under development and i will have updates…
This is the Superman shield that was on Superman's uniform on the cover of Action Comics #1 and the first Superman emblem anyone saw. I have provided two versions of this model, one with an outline for all the elements and one without. If…
Fin not a direct replacement, you will need to print matching set, small and large option both fit the original fin support
Gridfinity bin for your Osmo action 4 battery case and spare lens cover.
Baby Vaccination Aid – Pain Distraction Device This 3D-printed device is designed to help reduce the discomfort babies feel during vaccination. By providing a gentle sensory distraction, it helps mask the pain of the needle, making the…
I needed to add my Osmo action camera somewhere while doing timelapse videos on my workbench. so I made this tiny clamp suitable for any square tube lamp, such as Tertial from IKEA. printed in PETG 0,16 mm layer with 0,4mm nozzle tiny…
This is a set of blocks that can be used to recreate the Classic Space X1 Patrol Craft released in 1980 at 250% scale. The stl files for this set can be found in the "stl files" folder below. Please use the set inventory on bricklink…
This is a set of blocks that can be used to recreate the Classic Space Buggy released in 1979 at 250% scale. The stl files for this set can be found in the "stl files" folder below. Please use the set inventory on bricklink located here…
you can gleu some nuts in it for the screws so its a bit steadier
This is a set of pieces that can be used to recreate the Classic Space Futuron Blue and Futuron Yellow figures at 250% scale. These figures were introduced in 1987 and included in numerous sets between 1987 - 1990. All of the stl files…
This grip attaches to the front slide of the Foxbat nerf blaster and slides on the bottom picrail, aided by a few rollers for smooth operation. I have remixed the default front slide to include mounting holes for 4-40 plastic screws.…
It fits into a regular 36 mm (OD) waste pipe with an inner diameter of 31.6 mm. Intended for air ventilation purposes, not liquids. I made it a bit loose to ensure it went in without compressing the printed thread. Needed a couple of…
Vrstva 0,16mm, 45% výplně, materiál ASA. 6mm vratový šroub, pružina, podložka a křídlová matice. _______ Layer 0.16mm, 45% infill, ASA material. 6mm gate bolt, spring, washer and wing nut.
very basic assembly, if bolt(2) dosnt press fit into bolt(1) try sanding bolt(2) down or downsizing the model by 1% or so, otherwise all you need is a pen cartridge and a spring. I know pilot g.2 and similarly sized pen cartridges work, i…
General: This is a print-friendly action figure base with movable joints that can be posed into pretty much any position. The joints are designed to be stiff and keep their position. The figure has a height of about 24 cm. The joints are…
This is a from-scratch rebuild of the RoboForce figure Wrecker. It's about ⅔ the original scale. There's no pneumatic arm action, but I did include the button in the back that uses a ballpoint pen spring and the arms can bend inward using…
This is a from-scratch rebuild of the RoboForce figure Vulgar. It's about ⅔ the original scale. There's no pneumatic arm action, but I did include the button in the back that uses a ballpoint pen spring and the arms can bend inward using…
This is a set of pieces that can be used to create customizable Iron Man figures at 250% scale. This is an original design that we created which draws inspiration from the various Iron Man figures released over the years and offers…
This is a set of blocks that can be used to recreate two versions of the Iron Man Armory Alcove at 250% scale. Version 1 can be found in the Iron Man Armory set released in 2022, and version 2 comes from the Iron Man's Laboratory: Hall of…
The most meticulously organized Lego Star Wars collection A complete list of 55 Star wars factions available to download: At Attin Black Sun Bondsman's Guild/Bounty Hunters Churches of the Force CIS Separatists Clan Djarin Clan Fett…
This is a from-scratch rebuild of the RoboForce figure Maxx Steele. It's about ⅔ the original scale. There's no pneumatic arm action, but I did include the button in the back that uses a ballpoint pen spring and the arms can bend inward…
In 2018 eBay ran a television commercial in the UK title “The Battle of the Red Claw” where Action Man faces off against a villainous counterpart known as The Red Claw. Because he had a claw. And it was red. And you can view the…
manfrotto pocket actioncam mount. place your action cam on the manfrotto pocket MP1-C02
This is a from-scratch rebuild of the RoboForce figure Cruel. It's about ⅔ the original scale. There's no pneumatic arm action, but I did include the button in the back that uses a ballpoint pen spring and the arms can bend inward using…
Un gratte ou lave buse réaliser à partir d'une plaque de silicone acheté sur l'enseigne ACTION! une plaque à 3€ et le tour est jouer dans le kit vous avez un gabarit pour decouper au cutter le silicone à la bonne taille. Vous avez aussi…
An unusual chip extraction attachment - screwed underneath, to the foot, for edge work. Typical top extraction (i.e. between the milling machine and the foot, pulling the chips upwards) do not remove the spoil well when working with a…
Designed custom armor plates for spine area of Buster Doll Tank action figure. Armor parts can be printed without support (brim is recommended), then connected together using metal rods cut from standard paperclip. There is built in 3mm…
This highly detailed bust captures the essence of a legendary action hero — complete with iconic headband, muscular physique, and intense expression. Perfect for collectors and 80s action fans. Sculpted with care to show realistic texture…
Here is my take on the Classic Battlefront 2 DC15A rifle for custom 12 inch 1:6 scale action figures. I did my best to be as true to the design as possible despite lack of decent reference images, just in more of an HD high poly format.…
Edit: some of the files werent showing so had to re-upload them Here is my take on the Classic Battlefront 2 DC15A rifle for custom 12 inch 1:6 scale action figures but in a custom sniper mode. This custom sniper mode version comes in 4…
This is my take on a simple and effective retraction test model, designed to help you fine-tune your 3D printer's settings. Recommended Print Settings: Layer Height: 0.2 mm Infill: 0% Walls: 2 Material: Tested with PLA, but PETG should…
This backpack is designed around core idea of safely carry of a faceplate (alternative emotion) inside a fancy accessory. It is especially handy when taking figurine somewhere for a photoshoot, the alternative emotion is right there and…
We are excited to announce our first collaboration with Out of Dart! The 3D printed STL files for Fenrir 717 and Greedy Wolf 727 are now available at a 30% discount starting today This special offer runs until March 31st. Design Feature…
For those who like the finish of the printbed more. I made this version so you can have the imprint of your bed on both sides of the wallet. Only support you should need is inside of the screw holes the sides should print fine.
Primary intent of this modular system - is to safely carry alternative emotions of your favorite models, for quick switch when needed. EmoBags have different sizes, but their mounting system is allowing to connect bags together using 1mm…
A mount for the cheap Akaso EK7000 action camera sold by Amazon. I made this to attach the camera to a FPV drone. Designed to be printed in 95A TPU or similar. FreeCAD model file included.
Since the original holder in cooperation with the DJI osmo camera caused the microphone to be visible in the frame, I created a new holder. Printed from PETG. layer height 0.2mm filling 20%, without supports. The holder consists of 2 parts
This is a 3D printed adapter designed to mount a common bicycle light onto a standard action camera mount (e.g., GoPro style). Perfect for attaching your light to a helmet, handlebar, or any compatible mount, while keeping full…
A cool action figure you can play with. Bigger than Cool Little Action Figure, and a lot different. It may even be more fun than it.
this is a simpler model I will add a more detailed one later on free download!!!! Make sure to like if you download!!!!!
Support pour les étagères ACTION Permet aux étages de reposer sur la barre du milieu et évite que le “bois” ne se plie avec le poids.
A simple and effective tool to teach or learn about math fractions ,perfect for kids Math for clarity or for visual learners (print in different colors for clarity). printed with 15% infill No supports required! 120mm radius
This is a model are based off of a Halo-gravity traction (HGT) device created at Ann & Robert H Lurie Children's Hospital of Chicago. It's intended use is for medical education and fostering medical play opportunities. The model is scaled…
This is an original 3.75 inch / 1:18 scale action figure named F.P.A.P. The figure is inspired by Fisher Price Adventure People, but in this case F.P.A.P. stands for either "Functional Planetary Assistive Parasuit" where it is a human…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
|| Total price of models if purchased separately : 71.5€ >> more than -30% OFF with the pack || Hello, High-detailed models of WW2 German tanks for 3D printing, we recommend to use this models on resin printing. All the models include…
**DISCLAIMER: I made this for my old style Abloy keys, so that version is the one that is tested to work with actual keys. I did find 3D models of some other keys and modified the models to accept those keys BUT I can not confirm how well…
Hello, I have created an inlay for Star Wars The Deckbuilding Game, which holds the first game, the Clone Wars Edition and the Mandalorian Faction Pack in one box. The inlay is designed for sleeved cards. Printing: 5x Faction_Cards: white…
A compact and satisfying G26-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe, non-functional,…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Files for the Cycloneshock Break Action Kit and Shotty + Inline Cylinders.…
I used silver PETG to print it, and added black paint. Since paint does not adhere to PETG well, I covered it in Modpodge. For the wires I used bits of filament and hot glue. Yay! I made him a new head!
This is an original 3.75 inch / 1:18 scale action figure named Snowmnoid. They are a species of synthetic crystalline life forms, descended from both the Ice and Snow races. Their feet are extra wide for easy walking in deep snow. The…
Everything fits in the base box: base + 1st expansion + fan factions + 4 town bonus tiles (except cloth bag, which is not essential). 16 STL files, 36 parts to print. PETG/PLA, 0.2mm layer. A few hints: Lift the lid at the corner for…
Custom mount screw designed for DJI Osmo Action 5 Pro camera mounts. Thread: M5 Total length: 54 mm Thread length: 16 mm Printed in PETG for improved durability, heat resistance, and outdoor use. Suitable for action camera setups where…
This is the Gourd skin for C00lkidd from the hit Roblox game Forsaken turned into an action figure.
I created these tools for mounting my DJI Action 5 Pro camera on a kayak. There are connectors of different sizes, and a special one that takes into account that the lens of the camera is not in a centered position. I took care to make it…
It is designed to be printed from flexible filament such as TPU/TPE with an optional hard insert (PETG) to make the cap harder. The design contains a few different versions: Simple flat: one piece with flat internal cap surface (TPU/TPE).…
I printed in PETG. A 0.2MM layer height leaves the top fairly rough, but it seems to feed well. I printed the sample in the picture with 15% infill and just 2 wall layers as a test. I'm planning to do another in 35-50% and 4 layers once I…
YOU WILL NEED THE KIT TO BUILD THIS: USA: Bearswares: https://bearswares.shop/products/vulture-mk3-by-mhp-arms?variant=42951208534129 Out of Darts: https://outofdarts.com/products/mhp-vulture-lever-action-springer-hardware-kit AUS:…
Theres both a left and right handed version, and it can be used to create a slide return by threading a rubber band through the front sight. Replace HookR/HookL of the original files Hope you have fun with it, and if you do, please leave…
thank you to the amazing person who made the original pistol model I just made some red dots clip onto it. it may be a little hard to clip in but once you clip it in it won't be coming out. and go checkout my other models.
This is the Gasharpoon skin for John Doe that originates from Limbus Company turned into an action figure.
The "Love" and "Like"reaction have pieces to assemble with the objective not to use a multicolor system, you'll print them in one color The others reactions don't have cut in the body, only the mark to situate the respective pieces And…
Tips You have to remove the bottom peg on the chest to get it to fit. sand You can print the frame out of PLA or PETG, they both work. Armor, what ever you want.
Model A01 is a compact, single-peg action figure base stand designed to support figures with one foot peg hole. This stand is ideal for collectors who want a clean, minimal solution for stable displays without bulky bases. Compatible with…
Simple Easy to Print Solder Fume Extraction for 120mm fan Print uprights with no supports. Carbon filter can be added using additional housing between the fan and extractor.
a rally front spliter for the arrma infraction 3s / mega Category: R/C Vehicles
Simple connector, might need a spacerbetween it and the wall
Feel free to reach out if you need any additional customizations or attachments for this holder. Together, we can expand its potential and make your action holder even more versatile:) Unleash your creativity and take your everyday phone…
EGS-B1 - is a tactical features upgrade for modular Water Gun System converting it to an Energy Gun System. Features: Stock with reduced vertical profile (girlpla compatible) and variable length 45mm long top rail module 5mm short rail…
Thanks to the Way of the Wrench video paving the way for modding a lockdown bar for a Stern-style fire button, I couldn't wait until all my parts arrived (mainly the correct button and LEDs), so I changed the housing to accommodate a…
A friend asked for a full-sized version of Dracule Mihawk's sword as seen in Netflix's live action version of One Piece (2023) This thing is a monster. It's 1727mm (68") from tip to pommel and 711mm (28") across the hilt. To help with…
Please be aware that one side is wider than the other, so there is a "correct" orientation for the pieces. I loved the model by @Shonk, but wanted some small and simple ones for tracking unused and taken actions in Lord of the Rings -…
VARIO GT 24 Girder Wall Formwork The variable Girder Wall Formwork System with the proven Lattice Girder GT 24 With girder wall formwork, the arrangement of the individual system components can be freely selected. As a result, the VARIO…
A fun action figure that I designed during tech class at my school. This is model number 1 and I am going to change it in many ways that I think will make it better. This model uses some dummy 13 parts in it so props to the maker of the…
