Pen for Pilot G2 refill - monami style action, with clip
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.07 – €0.08 net (excluding VAT)
For file: Ring Pen G2 round v10 corr_0.4n_0.2mm_PLA_MINIIS_4m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Pen for Pilot G2 refill - monami style of action, with clip. No screws necessary, just a Pilot G2 refill and a spring.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 2
- Views
- 362
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Pen for Pilot G2 refill
Print Instructions
Print with 0.2mm layer height, with organic support outside the pen (see the 3mf files). Print any material you would like. I recommend printing it with PETG.
Assembly Instructions
Print one pen and one endpiece. Set it together with a Pilot G2 refill and a spring.
Update:
Uploaded a better version of the endpiece (PilotG2mnm clip v10) - thinner arm + bigger protrusion = easier switch-off.
Update (02.03.2025):
Uploaded sturdier version (v13T1.8) with thicker walls (1.8 mm) and smaller hole (needs drilling/filing a little bit for the refill to fit - but then it is possible to drill/file just enough for the refill to fit snugly, so it doesn't wiggle and writing with it is more precise)
Update (10.02.2026):
Uploaded a ring for easier switching off.