Pen for Pilot G2 refill - monami style action, with clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pen for Pilot G2 refill - monami style of action, with clip. No screws necessary, just a Pilot G2 refill and a spring.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 35
- Wydruki
- 2
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Pen for Pilot G2 refill
Print Instructions
Print with 0.2mm layer height, with organic support outside the pen (see the 3mf files). Print any material you would like. I recommend printing it with PETG.
Assembly Instructions
Print one pen and one endpiece. Set it together with a Pilot G2 refill and a spring.
Update:
Uploaded a better version of the endpiece (PilotG2mnm clip v10) - thinner arm + bigger protrusion = easier switch-off.
Update (02.03.2025):
Uploaded sturdier version (v13T1.8) with thicker walls (1.8 mm) and smaller hole (needs drilling/filing a little bit for the refill to fit - but then it is possible to drill/file just enough for the refill to fit snugly, so it doesn't wiggle and writing with it is more precise)
Update (10.02.2026):
Uploaded a ring for easier switching off.