1 / 1
Creality K1 Door/lid handle spigot washer spacer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spigot for the door handle. These sit in the holes in the glass between the handles and the screws.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
They take around 60s to print per pair, I printed at 0.1mm later height. Ensure your XY hole calibration is good otherwise they won't fit. Mine weren't very tight going into the holes but it was good enough and serves it's purpose regardless.
