Right Angle Spigot for SCA-1200HT Support Cleaning Apparatus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Right angle adapter for your support cleaning bath
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Adapter Snaps on to the Drain Outlet of the SCA-1200HT Support Cleaning Apparatus In order to point the flow of Liquid down instead of out.
If there is back pressure I could see the Liquid trying to make its way out the slots between the tabs, but unless you are blocking the outlet you shouldn't have an issue. You may need to slowly open the valve to make sure it does not spray
If you are having trouble with the tabs breaking off, print with the Rounded outlet facing Up so that the horizontal layers span the length of the tabs. almost in a capital L shape.
This will ensure that the layers span the length of the Flexible tabs and may result in less breakage.