Spigot Valve Themed Cabinet or Drawer Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cabinet or drawer knob that looks like a traditional water spigot valve.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dimensions: Handle is ~45 mm in diameter. Shaft (or offset from cabinet or drawer) is ~18 mm long. Screw hole is #8-32 and 15 mm (~5/8") deep.
Hardware required: Like most cabinet or drawer knobs, this requires an #8-32 screw and has 15 mm (~5/8") of available thread. The total length of your screw will of course depend on the thickness of your cabinet or drawer.
Printing instructions: I recommend printing with at least 20% infill and 3 walls for strength. If you wish, save some printing time and filament by reducing the infill in the cylindrical section a comfortable distance away from the threaded area.
- Printing in metallic filament will give quick, good results.
- Alternatively, you can prime (I like Rust-Oleum 260510 - Automotive 2 in 1 Filler and Sandable Gray Primer) and paint with your favorite metallic spray-paint. A clear coat (I like Rust-Oleum 249087 Painter's Touch 2X Ultra Cover Matte Spray Paint) will protect your paint job. The clear coat is also available in Gloss, Satin, and Semi-gloss.
Show me some love: If you like my design you can donate to me via PayPal or Buy Me a Coffee. No donation is too small.