1 / 1
Paterson-Compatible Film Reels (All Sizes) — zdjęcie 1

Paterson-Compatible Film Reels (All Sizes)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Eight different size film reels for Paterson developer tanks.

Ocena
5 / 5
Polubienia
17
Pobrania
197
Wydruki
1
Wyświetlenia
868
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I needed some reels for APS (24mm) film. I was inspired by the excellent work of @thinbegin but his models didn't fit my particular developing spindle. So, like any well-adjusted person, I spent too much time making my own parametric design with a compliant central core. The core makes it a bit more adaptable to different printers and different spools. At least, that's the theory. Let me know how it works in practice!

100 microns is the tightest tolerance for this design. Unlike @thinbegin's designs, these go together once with superglue and don't disassemble. Most thermoplastics are compatible with film developer solutions, and superglue is safe once cured. When you assemble the reel halves, make sure the end of the spiral rests inside the grove of the top spool, otherwise the grooves will be the wrong distance apart. The spiral is a little over 1.5 meters in length. 

Of course, since the design is parametric, it's easy enough to make a variant for some of the more common film sizes. I currently have Super8 (8mm), 110 (16mm), APS (24mm), 126 / 135 / 828 (35mm), 127 (46mm), 120 / 220 / 620 (60mm), 65mm, and 116 (70mm) variants. If you need a size I haven't posted, drop me a message and I can make a new one. I've also included a STEP file for each variant in case you want to play around with it.

Tagi