Paterson-Compatible Film Reels (All Sizes)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eight different size film reels for Paterson developer tanks.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 203
- Makes
- 1
- Views
- 895
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed some reels for APS (24mm) film. I was inspired by the excellent work of @thinbegin but his models didn't fit my particular developing spindle. So, like any well-adjusted person, I spent too much time making my own parametric design with a compliant central core. The core makes it a bit more adaptable to different printers and different spools. At least, that's the theory. Let me know how it works in practice!
100 microns is the tightest tolerance for this design. Unlike @thinbegin's designs, these go together once with superglue and don't disassemble. Most thermoplastics are compatible with film developer solutions, and superglue is safe once cured. When you assemble the reel halves, make sure the end of the spiral rests inside the grove of the top spool, otherwise the grooves will be the wrong distance apart. The spiral is a little over 1.5 meters in length.
Of course, since the design is parametric, it's easy enough to make a variant for some of the more common film sizes. I currently have Super8 (8mm), 110 (16mm), APS (24mm), 126 / 135 / 828 (35mm), 127 (46mm), 120 / 220 / 620 (60mm), 65mm, and 116 (70mm) variants. If you need a size I haven't posted, drop me a message and I can make a new one. I've also included a STEP file for each variant in case you want to play around with it.