Neptupe 4 Pro Head Bambu Lab hotend MGN12H
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Neptune 4 Pro Head forMGN12H rails with Bambu Lab hotend and two 5015 fans for part cooling.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I tried to design new head for Neptune 4 Pro to use it on MGN12H rail with Bambu Lab hotend, good part cooling, Sherpa Mini extruder, and place for accelerometer ADXL345.
Note that you need to redo the Z-axis further, as the nozzle contact point has moved up and the Z-axis carriages rest against the motors. I temporarily moved the engines upstairs, but I recommend to apply next modification for it https://www.printables.com/model/648114-belt-driven-elegoo-neptune-4
Also you will need to change your X axis with 2020 profile.
For part cooling two 5015 are used.
For hotend cooling 4010 is used. For now I am using 3010 with next adapter https://www.thingiverse.com/thing:5374715
You should change Bambu Lab thermistor connector, or just soldering it to contacts on PCB
Additionally It is necessary to extend the Probe wires.
It is hard to build mode. So please do it at your own risk, only if you are an enthusiast, have a lot of time.
I will form BOM in future cause I am really tired by this project. Just will say that I used M2.5x6 (may use shorter) and M3x5 threaded inserts.
Future plans:
- add LED
- add Beacon3D Cartographer support
- rework X enstop mount
- rework 5015 bridge