Raptor XL Lightbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With the multitude of off-road fans out there, a big one I get asked a lot to create is the Ford Raptor Lightbox.
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
This is my “Raptor” Lightbox and what I used to assemble it.
Bambu Labs P1S/AMS
- .04 Nozzle
- 10% Gyroid Infill
Filaments used for this project:
- Elegoo PLA - White
- Elegoo PLA - Black
Software:
-Fusion360
-Bambu Studio
Materials:
-LED kit (1 meter) - white or RGB
-Power source via USB or AC adapter (Usually supplied with kits)
Tools:
-Glue gun with glue sticks
-Hobby knife
-Soldering iron with solder (If required for assembling led kit)
-Scissors
-Super glue
Note: I do not apply a hole for wire pass-through so that you have the option of placing it where you would like it.
***Use “Caution” when handling “sharp” tools, “hot” equipment and electrical devices - follow your led kits user manual for installation.
I hope you enjoy this lightbox as much as I do and save a spot in you man-cave for more to come.
I greatly appreciate a ”follow” as it would help to inspire me to release more content throughout this journey, as always thank you for stopping by.