(FreeCAD parametric) Fading beard comb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get a fading beard cut with this easy to print barber fade comb.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 168
- Wydruki
- 1
- Wyświetlenia
- 925
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution — Noncommercial
Fadeing combs for hair don't work for beards. So i made this parametic FreeCAD model which i like to share. I used FreeCAD Version 1.0.0RC2.38806 (Git) and VarSet for parameters instead of a (classic) spreadsheet.
The STLs have a width of 50mm and I have set the properties for width read only, because i didn't test it properly so don't expect it to work.
Keep in mind, if you need a left handed version of the “40mm fade from 1 to 9 beard comb.stl” you can use the mirror function in your slicer.
Print instructions:
- Use a 0.4 Nozzel (lamellas are 1.2mm)
- Try not to use a brim, instead make sure you have a good bed adhasion
- 3 Walls
- Layer heigth 0.16mm or lower
- No supports
I printed my in PLA and one in PETG.
Update 19.01.25:
- Bugfix: Guard was not calculated correct