(FreeCAD parametric) Fading beard comb
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Get a fading beard cut with this easy to print barber fade comb.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 169
- Makes
- 1
- Views
- 929
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Men
- License
- Creative Commons — Attribution — Noncommercial
Fadeing combs for hair don't work for beards. So i made this parametic FreeCAD model which i like to share. I used FreeCAD Version 1.0.0RC2.38806 (Git) and VarSet for parameters instead of a (classic) spreadsheet.
The STLs have a width of 50mm and I have set the properties for width read only, because i didn't test it properly so don't expect it to work.
Keep in mind, if you need a left handed version of the “40mm fade from 1 to 9 beard comb.stl” you can use the mirror function in your slicer.
Print instructions:
- Use a 0.4 Nozzel (lamellas are 1.2mm)
- Try not to use a brim, instead make sure you have a good bed adhasion
- 3 Walls
- Layer heigth 0.16mm or lower
- No supports
I printed my in PLA and one in PETG.
Update 19.01.25:
- Bugfix: Guard was not calculated correct