TPU cover for Tolino 5 e-book reader / TPU-Hülle für Tolino 5 eBook-Reader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU protective cover for Tolino 5 in two versions. TPU-Schutzhülle für Tolino 5 in zwei Ausführungen.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Since the existing case of my Tolino 1 e-book reader didn't fit my new Tolino 5, I designed and printed one.
I was also bothered by the significantly narrower side edges of the Tolino 5, which made it difficult to hold the reader with one hand without touching the screen, e.g. when reading in bed. The cover (outer dimensions 174 x 140 mm) therefore has wider side edges.
For those who don't like/need that, I have also provided a narrower version (174 x 125 mm).
Print data:
Printed in TPU without support, I used 15% Gyroid infill.
Printing time on my Neptune 4 Pro: 3:20 hours (wide version)
Filament used: 61g
EDIT
I also created a travel cover that can be easily clipped on to protect the display when you take the Tolino with you on a trip (suitable for both the narrow and wide versions).
These can be printed in PLA or PETG.
-------------------------------------------------------------------------------------
Da die vorhandene Hülle von meinem Tolino 1 eBook-reader für meinen neuen Tolino 5 nicht passte, habe ich eine konstruiert und gedruckt.
Außerdem haben mich beim Tolino 5 die erheblich schmaleren Seitenränder gestört, die es schwer machen, den Reader, z.B. beim Lesen im Bett, mit einer Hand zu halten, ohne dabei den Bildschirm zu berühren. Die Hülle (Außenmaße 174 x 140 mm) hat deshalb breitere Seitenränder.
Für die, die das nicht mögen/benötigen, habe ich auch eine schmalere Ausführung (174 x 125 mm) bereitgestellt.
Druckdaten:
Gedruckt in TPU ohne Support, ich habe 15% Gyroid-Infill verwendet.
Druckzeit auf meinem Neptune 4 Pro: 3:20 Stunden (breite Version)
Filamentverbrauch: 61g
EDIT
Ich habe noch eine Reise-Abdeckung erstellt, die einfach aufgeklipst werden kann, um das Display zu schützen, wenn der Tolino mit auf Reisen gehen soll (passend sowohl für die schmale als auch für die breite Ausführung).
Diese können in PLA oder PETG gedruckt werden.