Heavy Duty Supporting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a bracket that would hold a shelf and carry larger loads.
- Ocena
- 5 / 5
- Polubienia
- 69
- Pobrania
- 270
- Wydruki
- 5
- Wyświetlenia
- 947
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a supporting bracket to hold onto a quite heavy shelf because the original ones broke due to the weight of that shelf. Thus, I designed this and simulated it to see whether it will withstand the loads that I was expecting. It gladly did and after a couple months, it is still holding strong. It was designed for M3 countersunk screws, but you can always drill a larger hole if needed. I printed it with a 0.3mm height as it does not have to be very beautiful, it just has to work. I would encourage to add additional perimeters to add strength.