1 / 3
DIN Rail 1U PSU Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to mount a 1U PSU to DIN rail - requires external part from another printables listing (see description).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- Two versions created - one where the PSU is centered on the rail, another where the PSU is offset to one side.
- Print a pair of brackets, and a pair of the DIN rail mounting tabs from https://www.printables.com/model/8512-din-rail-mounting-tab
- Clamp the PSU in the bracket using up to 3x M3x14 screws and nylock nuts (2 on each bracket seems to work fine, holes for 3 are offered in case your printer tolerances or PSU are slightly different.
- This may or may not accommodate Flex ATX PSUs, but this is not a Flex ATX PSU bracket - the dimensions are similar but not identical.