1 / 3
DIN Rail 1U PSU Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to mount a 1U PSU to DIN rail - requires external part from another printables listing (see description).
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 0
- Views
- 296
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- Two versions created - one where the PSU is centered on the rail, another where the PSU is offset to one side.
- Print a pair of brackets, and a pair of the DIN rail mounting tabs from https://www.printables.com/model/8512-din-rail-mounting-tab
- Clamp the PSU in the bracket using up to 3x M3x14 screws and nylock nuts (2 on each bracket seems to work fine, holes for 3 are offered in case your printer tolerances or PSU are slightly different.
- This may or may not accommodate Flex ATX PSUs, but this is not a Flex ATX PSU bracket - the dimensions are similar but not identical.