1 / 4
Galaxy Z Fold 6 SPen Stylus Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip for Fold edition S Pen, can mount on hinge/back of cases that don't have a stylus slot using 3m tape
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 784
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (15)Powiązane
* Uploaded V2 which is slightly longer but has a much stronger clip – the pen audibly clicks in place, and it takes a bit of force to remove. I recommend using this one.
_____________________________________________
Made this for my case since I wanted a magsafe case for the car mount, but also wanted an spen slot.
- Strikes a good balance between retention and ease of use; the pen will not come out if pulled perpendicular to the case, it needs to be rotated out, slid down from the top portion and then pulled, or pulled at a ~45° angle.
- Comfortable in the hand whether the pen is in or out of the clip
- If mounted on the hinge of a case, pen provides grip surface for holding while unfolded
Prints without supports (maybe use a brim)
Use a double sided 3m tape like this (https://www.amazon.com/3M-9495LE-0-625-5-9495LE-Double-Polyester/dp/B00K6E1Z7C)