QIDI Q1 Pro filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to design a more effective filter for QIDI Q1 pro for printing ABS.
- Ocena
- 4 / 5
- Polubienia
- 45
- Pobrania
- 185
- Wydruki
- 0
- Wyświetlenia
- 2644
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Active carbon scrubbers need a lot of mass to be effective against VOCs. There're plenty designs to add scrubber to Q1 PRO, but I'm not sure how much they really help. But even a small HEPA can do a good job filtering small particles, so I decided to tackle that.
The problem with HEPA is it restrict air flow so much it's hard to push air though it without leaks. So I had to mount it in the chamber in front of the fan.
It might interfere with the print head a little bit but shouldn't be too much a concern. It's mounted with the same screw the ventilation fan uses.
Since Q1 Pro has heated chamber use at least PETG
Filter used: https://www.amazon.com/Electropan-Filter-Replacement-Robotic-Cleaner/dp/B0782T7L6P Just push it in, it's tight for sealing.