QIDI Q1 Pro filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Active carbon scrubbers need a lot of mass to be effective against VOCs. There're plenty designs to add scrubber to Q1 PRO, but I'm not sure how much they really help. But even a small HEPA can do a good job filtering small particles, so I decided to tackle that.
The problem with HEPA is it restrict air flow so much it's hard to push air though it without leaks. So I had to mount it in the chamber in front of the fan.
It might interfere with the print head a little bit but shouldn't be too much a concern. It's mounted with the same screw the ventilation fan uses.
Since Q1 Pro has heated chamber use at least PETG
Filter used: https://www.amazon.com/Electropan-Filter-Replacement-Robotic-Cleaner/dp/B0782T7L6P Just push it in, it's tight for sealing.